Click here to open old website version
All categories
Parts by Car
Go
Parts by Car
Go
Parts by:
Category

Opel / Vauxhall

Opel 2.2 16V X22XE C22XE C22LET FCP H- beam steel con rods 148mm
Opel 2.2 16V X22XE C22XE C22LET FCP H-beam steel connecting rods 148mm
Product detailed specification

Manufacturer: FCP Engineering
Model: FCPRHO1485221
Profile: H-beam
C to C: 148mm
Big end diameter: 52mm
Pin diameter: 21mm
Quantity: 4 pcs., 8 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 600HP (4 cylinder)
Advertised RPM rating: 9000RPM

Opel / Vauxhall - 2.2 16V (X22XE and Hybrid C22XE, C22LET)
After booking please write which big end width you need: 21.90mm or 26.30mm!
€399.00
Opel 3.0 3.2 24V V6 X30XE Z32SE Y32SE FCP H-beam steel con rods 148mm
Opel / Vauxhall 3.0 3.2 24V V6 X30XE Z32SE Y32SE FCP H-beam steel connecting...
Product detailed specification

Manufacturer: FCP Engineering
Model: FCPRHO1485721-6
Profile: H-beam
C to C: 148mm
Big end diameter: 57mm
Pin diameter: 21mm
Quantity: 6 pcs., 12 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 800HP (6 cylinder)
Advertised RPM rating: 9000RPM
Opel / Vauxhall - 3.0 3.2 24V V6 MV6 (X30XE, Z32SE, Y32SE)
€579.00
Opel 1.6 1.8 16V X16XE C16XE X18XE FCP steel connecting rods 129.75mm
Opel / Vauxhall 1.6 1.8 16V X16XE C16XE X18XE FCP H-beam steel connecting...
Product detailed specification

Manufacturer: FCP Engineering
Model: FCPRH129754618
Profile: H-beam
C to C: 129.75mm
Big end diameter: 46mm
Pin diameter: 18mm
Quantity: 4 pcs., 8 pcs. ARP2000 5/16" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 600HP (4 cylinder)
Advertised RPM rating: 9000RPM

Opel / Vauxhall - 1.6 1.8 (X16XE, C16XE, X18XE)
€399.00
Opel Z20LET Z20LEH FCP racing valve spring kit + titanium retainers
Opel / Vauxhall 2.0 Z20LET Z20LEH FCP racing valve spring and retainer kit
Valve springs data
Installed seat pressure - 30kg

Lift - 100kg@13mm
Max. lift - up to 13mm
Made from chrome-silicone steel SAE9254-V
16 pcs. outer springs
16 pcs. inner springs
16 pcs. titanium retainers
Fits Opel / Vauxhall 4 cylinder 2.0 16V Z20LET Z20LEH engines.
With this set the risk of valve flutter and a possible engine failure is minimized.
Recommended for engines with series and racing camshafts and over 7600 RPM.
Titanium retainers are very light and strong, helps eliminate valve float. Weight is only 10g.
€399.00
Opel/Vauxhall 2.0 C20XE 86.50/87.00mm
Opel 2.0 C20XE Wossner pistons kit CR 12.5 86.50mm K9259D050

Product detailed specification

Bore size

86.50mm

Stroke

86.00mm

Wossner compression ratio (CR)

12.5:1

OEM compression ratio (CR)

10.5:1

Dome volume (CC)

+2.30cm3

Compression height (CH)

30.50mm

Pin diameter

21mm

Fits for

Opel 2.0 16V (C20XE)

€749.00
Opel/Vauxhall 2.0 16V 1.3mm
Opel / Vauxhall 2.0 16V 20XE C20LET/XE Cometic cylinder head gasket 88x1.3mm...
Part number C4216-051.
Cometic MLS cylinder head gasket 88x1.3mm.
For Opel / Vauxhall - 2.0 16V (20XE, C20XE, C20LET)
€116.00
Opel 1.6 TURBO Z16LET/LEL/LER/LEH FCP H-beam steel con rods 129.75mm
Opel / Vauxhall 1.6 Turbo Z16LET/LEL/LER/LEH FCP H-beam steel connecting rods...
Product detailed specification

Manufacturer: FCP Engineering
Model: FCPRHO129754619
Profile: H-beam
C to C: 129.75mm
Big end diameter: 46mm
Pin diameter: 19mm
Quantity: 4 pcs., 8 pcs. ARP2000 5/16" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 600HP (4 cylinder)
Advertised RPM rating: 9000RPM

Opel / Vauxhall - 1.6 16V Turbo (Z16LET, Z16LEL, Z16LER, Z16LEH)
€399.00
Opel 1.8 2.0 2.2 2.4 ACL Race connecting rod bearings 4B2322H-STD
NGINE BEARINGS
rods.jpg

CON ROD BEARING SET

Part#
4B2322H

4B2322HX

 
Sizes STD, .025, .25, .50 STD
Oil Clearance Standard + 0.001" Extra
Half Type Upper & Lower
Material

Tri-metal Hardened steel backs

Min Std Shaft Size

1.9280in / 48.971mm

Max Std Shaft Size 1.9286 in / 48.987mm
Min Std Tunnel Size

2.0472in / 52.000mm

Max Std Tunnel Size

2.0477in / 52.012mm

Max Wall at Crown

0.0591in / 1.500mm

0.0596in / 1.513mm

Max Overall Length

0.760in / 19.30mm

Notes Upper rod bearing has two oil holes to cover early and late engines.

Diagram       
(Top View) 

4B2322H_000.JPG
Engines Opel 4 cylinder 1.8 2.0 2.2 2.4
€75.00
Opel 1.8 2.0 2.2 2.4 ACL Race connecting rod bearings 4B2322H-0.25
NGINE BEARINGS
rods.jpg

CON ROD BEARING SET

Part#
4B2322H

4B2322HX

 
Sizes STD, .025, .25, .50 STD
Oil Clearance Standard + 0.001" Extra
Half Type Upper & Lower
Material

Tri-metal Hardened steel backs

Min Std Shaft Size

1.9280in / 48.971mm

Max Std Shaft Size 1.9286 in / 48.987mm
Min Std Tunnel Size

2.0472in / 52.000mm

Max Std Tunnel Size

2.0477in / 52.012mm

Max Wall at Crown

0.0591in / 1.500mm

0.0596in / 1.513mm

Max Overall Length

0.760in / 19.30mm

Notes Upper rod bearing has two oil holes to cover early and late engines.

Diagram       
(Top View) 

4B2322H_000.JPG
Engines Opel 4 cylinder 1.8 2.0 2.2 2.4
€75.00
Opel / Vauxhall 3.0 24V V6 X30XE Wossner pistons kit 86.50mm CR 8.5 KX30XED050

Product detailed specification

Bore size

86.50mm

Stroke

85.00mm

Wossner compression ratio (CR)

8.5:1

OEM compression ratio (CR)

10.8:1

Compression height (CH)

30.40mm

Pin diameter

21mm

Fits for

Opel 3.0 24V (X30XE)

€1,249.00
Opel/Vauxhall 2.0 16v Head studs
Opel / Vauxhall 2.0 16V C20LET Z20LET ARP cylinder head stud kit 209-4301
ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.
€194.00
Opel C20LET/XE Z20LET/LEH/LER FCP X-beam steel connecting rods 143.10mm
Product detailed specification

Manufacturer: FCP Engineering
Model: FCPRXO14315221
Profile: X-beam
C to C: 143.10mm
Big end diameter: 52mm
Pin diameter: 21mm
Quantity: 4 pcs., 8 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 1000HP (4 cylinder)
Advertised RPM rating: 9000RPM

Opel / Vauxhall - 2.0 16V (C20LET, C20XE, Z20LET, Z20LEH, Z20LER)
€499.00
1 2 3
8