Home (166)

Toyota 2.5 3.0 2JZGTE ACL Race main bearings 7M8103HX-STD

Sizes	STD, .025, .25
Oil Clearance	Standard
Half Type	Upper & Lower
Material	Tri-Metal
Min. Std Shaft Size	2.4403in / 61.984mm
Max. Std Shaft Size	2.441in / 62.001mm
Min. Std Tunnel Size	2.5992in / 66.02mm
Max. Std Tunnel Size	2.5998in / 66.035mm
Max Wall at Crown	0.0789in / 2.004mm
Max Overall Length	0.7874in / 20mm (8103H/HX) 0.9055in / 23mm (8104H/HX)
Weight	0.44
Notes	0

199,00 €

Opel / Vauxhall 2.0 16V C20LET Z20LET ARP cylinder head stud kit 209-4301

ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.

217,00 €

Mitsubishi 4G63 '94-up M8 ARP connectig rod bolt kit 107-6002

ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.

69,00 €

Audi S2 RS2 2.2T 20V AAN ABY King Racing thrust washer kit TW2009AM

19,00 €

BMW 2.5 2.7 M20 Athena Cooper Ring cylinder head gasket 86.5x2mm 330244R

Athena Racing 330 series Cooper Ring cylinder head gasket.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).

Part number starting with 330
Athena advantages
Reinforced material	Asbestos free composite raw material OE approved
Stainless steel ring (AISI304)	Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required
Silicon beading	Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages

325,00 €

Ecumaster battery isolator AS-SR Radlok Rev.2

•Weight: 83g
•Dimensions: 50mm x 100mm x 38.5mm
•Voltage range: 6V – 19V, 28V transient
(12V automotive installations only)
•Operating temperature range: -40C + 125C
•Current capability: 300A continuous, peak up to 1000A
•Current measurement resolution 4A
•Current measurement range: -1000A to 1000A
•Current measurement accuracy: ±10%
•Inductive load switching capability: 600mJ
•Enclosure: Anodized aluminium, IP67 rated
• High current terminals: M8 nickel plated terminals
or Radlok connectors
•Signal connector: Deutsch ASX202-06PN
(mating plug ASX602-06SN included)
•Power save state current consumption: <1mA
•ON state current consumption: ~20mA
•Engine kill output: 3A, High (VBat), Low (GND) or Hi-Z

549,00 €

Cometic Toyota 7M-GE / GTE Bottom End Gasket Kit PRO2020B

89,00 €

BMW M50 M52 UPGRADED REINFORCED OIL PUMP SHAFT - TURBO

219,00 €

Subaru BRZ 2.0 FA20 / Toyota GT86 2.0 4U-GSE Athena MLX cylinder head gasket...

299,00 €

BMW M5 E34 S38B36 ACL Race Series connecting rod bearings 6B1568H-STD

199,00 €

Renault 1.6 1.7 1.8 1.9 2.0 F4R F7R ACL Race main bearings 5M7807HX-STD

ENGINE BEARINGS
	MAIN BEARING SET
	Part#
	5M7807H	5M7807HX
Sizes	STD, .25, .50	STD
Oil Clearance	Standard	+ 0.001" Extra
Half Type	Identical Halves
Material	Tri-Metal
Min Std Shaft Size	2.1569 in / 54.785 mm
Max Std Shaft Size	2.1573 in / 54.795 mm
Min Std Tunnel Size	2.3122 in / 58.731 mm
Max Std Tunnel Size	2.3128 in / 58.744 mm
Max Wall at Crown	0.0765 in / 1.945 mm	0.0760 in / 1.933 mm
Max Overall Length	0.728 in / 18.50 mm
Notes
Diagram (Top View)

Engines Renault 4 cylinder 1.6 1.7 1.8 1.9 2.0
(F1N, F2N, F2R, F3N, F3P, F3R, F4R, F7P, F7R; F8M, F8Q - diesel)

109,00 €

Audi / VW 2.0 TSI GEN3 EA888 Athena Cooper Ring cylinder head gasket...

Athena Racing 330 series Cooper Ring cylinder head gasket.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).

Part number starting with 330
Athena advantages
Reinforced material	Asbestos free composite raw material OE approved
Stainless steel ring (AISI304)	Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required
Silicon beading	Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages

235,00 €