В корзине нет товаров
|
Part number starting with 330 |
|
|
Athena advantages |
|
|
Reinforced material |
Asbestos free composite raw material OE approved |
|
Stainless steel ring (AISI304) |
Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required |
|
Silicon beading |
Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages |
|
Product detailed specification |
|
|
Bore size |
84.00mm |
|
Stroke |
89.60mm |
|
JE Pistons compression ratio (CR) |
9.5:1 |
|
OEM compression ratio (CR) |
10.2:1 |
|
Dome volume (CC) |
-14.7cm3 |
|
Compression height (CH) |
32.40mm |
|
Pin diameter |
22mm |
|
Features |
Accepts Turbo and Nitrous; Ultra series |
|
Fits for |
BMW - 3.0 24V Turbo (N55B30) |
Outer diameter - 35.00mm
Inner diameter - 33.10mm
Outer height - 26.00mm
Stem length - 14.70mm
Stud diameter - 7.00mm
24 pcs. FCP Engineering racing mechanical solid lifters
Forged steel, nitride hardened surface, HRC 50
Installed follower height to camshaft must be adjusted with lash caps (not included)
Product detailed specification
Manufacturer: FCP Engineering
Model: FCPRHA1444920-5
Profile: H-beam
C to C: 144mm
Big end diameter: 49.00mm
Pin diameter: 20mm
Quantity: 5 pcs., 10 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 700HP (5 cylinder)
Advertised RPM rating: 9000RPM
Audi 90, Coupe - 2.3 20V (7A)
200, S2, RS2, S4, S6 - 2.2 20V Turbo (3B, ABY, ADU, AAN)
Ferrea Competition Plus Valves have built a reputation as the industry's most reliable extreme duty valve. To manufacture the valves we use special aerospace quality alloys, including the EV8-Z18, which provides high tensile strength. An exclusive two-step slow forging process ensures proper grain flow and virtually eliminates any damage to thematerial structure. The valves are then heat-treated and stress-relieved over a 48-hour period, which is the crucial base of our molecular integrity. These valves feature avionics-quality hard chrome along with a specially applied hard tip.
|
Product detailed specification |
|
|
Bore size |
86.50mm |
|
Stroke |
86.00mm |
|
Mahle compression ratio (CR) |
9.4:1 |
|
OEM compression ratio (CR) |
9.0:1 |
|
Dome volume (CC) |
-4.5cm3 |
|
Compression height (CH) |
33.37mm |
|
Pin diameter |
23mm |
|
Features |
2618 alloy |
|
Fits for |
Mitsubishi EVO X - 2.0 16V (4B11T) |
Manufacturer: FCP Engineering
Model: FCPRHT1525522
Profile: H-beam
C to C: 152mm
Big end diameter: 55mm
Pin diameter: 22mm
Quantity: 6 pcs., 12 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 1200HP (6 cylinder)
Advertised RPM rating: 9000RPM
Toyota Supra - 3.0 24V (7M-GTE)
|
Product detailed specification |
|
|
Bore size |
84.00mm |
|
Stroke |
89.60mm |
|
MAHLE compression ratio (CR) |
10.2:1 |
|
OEM compression ratio (CR) |
10.2:1 |
|
Dome volume (CC) |
-17.2cm3 |
|
Compression height (CH) |
31.70mm |
|
Pin diameter |
22mm |
|
Features |
Accepts Turbo and Nitrous |
|
Fits for |
BMW - 3.0 24V Turbo (N54B30) |
