Home (90)

Cometic VAG 2.0 TSI EA888 '12+ MLS cylinder head gasket 84x1.3mm C4979-051

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

130,00 €

Depo Racing digital 52mm oil temperature gauge PK-WA5247B

59,00 €

BMW / Toyota B38 / B48 / B58 Supertech Exhaust valve TEVI-1058-HS /...

70,00 €

Nissan 200SX S14 SR20DET Supertech intake valve NIVN-1005 STD

Product detailed specification
Model number	NIVN-1005
Head diameter	34.15mm
Stem diameter	5.97mm
Length	101.40mm
Material	Black nitrided stainless steel
Fits for	Nissan 200SX - 2.0 16V (SR20DE, SR20DET)

27,00 €

Ford 2.0 2.3 Duratec Athena MLS cylinder head gasket 91x1mm 338472R

Athena Racing 338 series multilayer steel (MLS) cylinder head gasket.
Athena MLS gaskets are designed to suit the requirements of today’s competition engines offering enhanced sealing compared to the OEM product. The gaskets are assembled from 2-5 layers of high quality stainless and spring steels.
Part number 338472R
Gasket thickness: 1.00mm
Bore size: 91.00mm

Part number starting with 338
Athena advantages
Optimized radius embossing shape	The round shape of the embossing increases sealing on cylinder bore, oil and cooling water passages and improves spring back strength
Advanced stopper technology	State of the technology enhances sealing pressure around the cylinder. Highest sealing properties in high power engines
Coating technology	Designed & engineered by Athena the special coating applied on steel surfaces, improves temperature resistance & reliability of the head gasket

129,00 €

ACL plain bearing measuring tape/flexigauge AG-1 (Green)

1. Remove the bearing cap, wipe the journal and bearing shell clear of oil.
2. Place a piece of Flexigauge across the bearing at the crown (see Figure 1).
3. Install the bearing cap and using a Torque Wrench tighten the bolts to the correct tension.
4. DO NOT REVOLVE THE SHAFT OR BEARINGS.
5. Remove bearing cap. The Flexigauge will be adhering either to the bearing or shaft.
6. Compare the width of the flattened Flexigauge with the graduation of the envelope. The figure within the graduations indicates the clearance in thousandths of an inch of millimetres, depending on which side of the envelope is used. (See Figure 2).
7. Taper is indicated when Flexigauge is wider at one end than the other, the amount of taper being the difference between the readings. The widest part of the Flexigauge represents the area of least clearance. “Barrelling” of the shaft when the Flexigauge is wider in the centre of the bearing.

16,00 €

ARP2000 replacement bolt 200-6209 (1 pc.)

ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.

16,00 €

Audi / VW 2.0 TSI EA888 FCP cтальные шатуны профиль 144mm/21mm профиль X for...

Подробная спецификация продукта:

Производитель: FCP Engineering
Модель: FCPRXATSI14450621
Профиль: профиль X (смазочный канал от большого конца до поршневого пальца)
С на С: 144mm
Диаметр отверстия нижней головки: 50.6mm
Pin diameter: 21mm
Quantity: 4 pcs., 8 pcs. ARP2000 3/8" bolts
Сделано из:4340 EN24er cтали
Максимальная рекомендуемая мощность: 1000HP+ (4 цилиндров)
Mаксимальные обороты RPM: 9000RPM
Audi / VW - 2.0 16V TSI (EA888)

549,00 €

Ecumaster pressure sensor 0-7 Bar

99,00 €

Ecumaster CAN Keyboard 12 pos

Key features

CAN bus compatible keyboard,
125kbps, 250kbps, 500kbps CAN bus speed supported,
works with EMU BLACK (1 keyboard) and PMU devices (up to 2 keyboards),
full customization possible,
IP 67 rated

349,00 €

Subaru EJ20 EJ205 EJ207 stroker kit with crankshaft

Kit includes:

1. Genuine Subaru 79.00mm stroke crankshaft
2. FCP Engineering H-beam connecting rod kit
3. JE Pistons kit (Bore size 92.50mm or 93.00mm CR 8.5:1)
4. King Racing connecting rod bearing set
5. King Racing main bearing set

2 199,00 €

Audi 4.2 40V V8 Supertech valve spring set SPRK-AUDI4.2T

Spring data:
Seat pressure: intake - 56lbs @ 36.60mm, exhaust - 75lbs @ 33.70mm
Spring coil bind: intake - 23.00mm, exhaust - 19.50mm
Max lift: intake - 13.60mm, exhaust - 14.20mm
Rate: intake - 6.70lbs/mm, exhaust - 10.00lbs/mm
Intake single spring:
Outer diameter - 20.60mm
Inner diameter - 14.40mm
Exhaust double spring:
Outer spring outer diameter - 29.10mm
Outer spring inner diameter - 21.90mm
Inner spring outer diameter - 20.50mm
Inner spring inner diameter - 15.50mm

Set includes:
Intake springs - 24 pcs. SPR-A2095
Exhaust springs - 16 pcs. SPR-H1002D-AU
Titanium retainers: 24 pcs. intake RET-AU5VI-T2, 16 pcs. exhaust RET-AU5VE-T4
Seats - 16 pcs. exhaust SEAT-H1000

1 400,00 €