В корзине нет товаров
Walbro part number: GSS342 (includes full install kit)
Type: universal electric in-tank fuel pump
Fuel: gasoline
Flow rate: 255LPH
Noise level: very quiet
Minimum voltage: 12V
Fuel pump dimensions:
Length: 120mm (overall)
Length: 80mm (case only)
Diameter: 39.5mm
Inlet width: 11mm
Outlet width: 8mm
Operating pressure: 15-90 PSI - final fuel pressure set by regulator
Pushing a whopping 255 liters of fuel per hour at high pressure
High pressure, high performance universal in-tank fuel pump for the extreme automotive enthusiast
All Walbro fuel pumps are brand new and 100% authentic Walbro. Made in the USA
Design based on TI Automotive OEM Chevrolet Corvette and Dodge Viper technology
| Sizes | STD, .025, .25 |
| Oil Clearance | Standard |
| Half Type | Identical halves |
| Material | Tri-metal Hardened steel backs |
| Min. Std Shaft Size | 2.0465in / 51.981mm |
| Max. Std Shaft Size | 2.0472in / 52mm |
| Min. Std Tunnel Size | 2.1663in / 55.024mm |
| Max. Std Tunnel Size | 2.167in / 55.042mm |
| Max Wall at Crown | 0.0593in / 1.506mm |
| Max Overall Length | 0.7598in / 19.3mm |
| Weight | 0.253 |
| Notes | 0 |
Part number GDE-VW8V-7A
Supertech valve guide
Material: Manganese Bronze
Outer diameter: 12.06mm
For 7mm valves
Audi / VW 1.8 16V (KR, PL, ABF, 9A, ACE), 2.2 20V (3B, AAN, ABY, ADU, 7A)
|
Product detailed specification |
|
|
Bore size |
81.00mm |
|
Stroke |
86.40mm |
|
JE Pistons compression ratio (CR) |
9.25:1 |
|
OEM compression ratio (CR) |
9.5:1 |
|
Dome volume (CC) |
-2.7cm3 |
|
Compression height (CH) |
32.66mm |
|
Pin diameter |
20mm |
|
Features |
Accepts Turbo and Nitrous, round piston skirt |
|
Fits for |
VAG - 1.8T 20V |
| ENGINE BEARINGS | ||
 |
CON ROD BEARING SET |
|
| Part# | ||
| 4B1568H |
4B1568HX |
|
| Sizes | STD, .025, .25 | STD |
| Oil Clearance | Standard | + 0.001" Extra |
| Half Type | Identical Halves | |
| Material |
Tri-metal Hardened steel backs |
|
| Min Std Shaft Size |
1.8888in / 47.975mm |
|
| Max Std Shaft Size |
1.8894in / 47.9911mm |
|
| Min Std Tunnel Size |
2.0472in / 52.000mm |
|
| Max Std Tunnel Size |
2.0478in / 52.015mm |
|
| Max Wall at Crown |
0.0785in / 1.993mm |
0.0780in / 1.980mm |
| Max Overall Length |
0.787in / 20.00mm |
|
| Notes | .. | |
|
Diagram |
 |
|
Engines BMW 2.0 2.3 2.5 (S14B20, S14B23, S14B25)
Timing belt:
Length: 1457mm
Width: 29mm
Number of tooth: 153
Balance belt:
Length: 520mm
Width: 13mm
Number of tooth: 65
Gates' timing belts offer a precision fit with easy installation and no interference engine damage - exactly what you've come to expect from the worldwide leader in timing belts.
- Tensile cord reinforced with premium, high-strength glass cords.
- Gripping teeth with aramid fiber technology and high saturation HNBR elastomeric composites for exceptional durability and heat resistance.
- Wear-resistant tooth jacket supported by reinforced nylon fabric and double-tooth stability.
The superior construction of Gates timing belts makes them 300 percent stronger than the standard aftermarket belt while providing up to three times the heat resistance.
|
Product detailed specification |
|
|
Model number |
SEVN-1012-2 |
|
Head diameter |
32.50mm |
|
Stem diameter |
5.96mm |
|
Length |
104.7mm |
|
Material |
Black nitrited |
|
Fits for |
Sbaru WRX - 2.0 2.5 (EJ20, EJ25) |
