В корзине нет товаров
| ENGINE BEARINGS | ||
 | MAIN BEARING SET | |
| Part# | ||
| 5M2167H | 5M2167HX | |
| Sizes | STD, .25, .50 | STD |
| Oil Clearance | Standard | + 0.001" Extra |
| Half Type | Identical Halves | |
| Material | Tri-Metal | |
| Min Std Shaft Size | 2.2437 in / 56.990 mm | |
| Max Std Shaft Size | 2.2441 in / 57.000mm | |
| Min Std Tunnel Size | 2.3866 in / 60.620 mm | |
| Max Std Tunnel Size | 2.3874 in / 60.640 mm | |
| Max Wall at Crown | 0.0710 in / 1.803 mm | 0.0705 in / 1.790 mm |
| Max Overall Length | 0.935 in / 23.75 mm | |
| Notes | ||
Diagram (Top View) |  | |
|
Product detailed specification |
|
|
Head diameter |
32mm |
|
Stem diameter |
7mm |
|
Length |
95.50mm |
|
Fits for |
Audi / VW - 1.8 16V, 2.0 16V, 2.2T 20V, 2.3 20V (KR, PL, 6A, 9A, ABF, 3B, AAN, ABY, ADU, 7A) |
|
Part number starting with 330 |
|
|
Athena advantages |
|
|
Reinforced material |
Asbestos free composite raw material OE approved |
|
Stainless steel ring (AISI304) |
Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required |
|
Silicon beading |
Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages |
|
Product detailed specification |
|
|
Model number |
HEVI-1030D |
|
Head diameter |
31.00mm |
|
Stem diameter |
5.45mm |
|
Length |
108.80mm |
|
Material |
Inconel |
|
Fits for |
Honda: |
Spring data:
Outer spring outer diameter: 27.50mm
Outer spring inner diameter: 20.00mm
Inner spring outer diameter: 20.00mm
Inner spring inner diameter: 15.20mm
Seat pressure: 91Lbs@33.60mm (seat), 224Lbs@11mm (open/lift)
Spring coil bind: 20.70mm
Max lift: 12.90mm
Rate: 12.10Lbs/mm
Set includes:
|
Product detailed specification |
|
|
Bore size |
82.50mm |
|
Stroke |
92.80mm |
|
JE Pistons compression ratio (CR) |
10.3:1 |
|
OEM compression ratio (CR) |
9.6:1 |
|
Dome volume (CC) |
-3.0cm3 |
|
Compression height (CH) |
29.60mm |
|
Pin diameter |
21mm |
|
Features |
Accepts Turbo and Nitrous; full round coated piston skirt |
|
Fits for |
Audi / VW 2.0 16V TSI chain driven engines EA888 (CAWA, VAWB, CCTA, CCZB, CAEA) |
JE's patented Perfect Skirt coating makes piston slap, false knock, and cold-start wear a thing of the past.
For the first time ever, 2618-alloy pistons can be installed with piston-to-wall clearances near that of an OEM piston!
