VW / Audi 1.6 1.8 2.0 16V FCP racing solid lifters (tappets, cam followers)

VW / Audi 1.6 1.8 2.0 16V FCP racing solid lifters (tappets, cam followers)

Part number FCPSLA/16
FCP Engineering mechanical racing solid lifters (tappets, cam followers)
Audi / VW - 1.8 2.0 16V (KR, PL, ABF, 9A and etc.)

365,00 €

Availibilty:4 шт.

Information

Lifter info:
Outer diameter - 34.97mm
Inner diameter - 33.10mm
Outer height - 26.30mm
Stem length - 14.70mm
Stud diameter - 7.00mm
Weight - 50g
16 pcs. FCP Engineering racing mechanical solid lifters.
Forged steel, nitride hardened surface, HRC 50.
Installed follower height to camshaft must be adjusted with lash caps (not included).

Вам также может понравиться

Audi / VW 1.8-2.0 16V Supertech valve spring set SPRK-V2093-4-16S

Spring data:
Seat pressure - 82lbs @ 31.75mm
Open (lift) pressure - 224lbs @ 11.50mm
Spring coil bind - 16.70mm
Max lift - 13.00mm
Rate - 12.50mm
Outer spring outer diameter - 30.40mm
Outer spring inner diameter - 23.20mm
Inner spring outer diameter - 21.90mm
Inner spring inner diameter - 16.50mm

Set includes:
Double springs - 16 pcs. SPR-V2093-4
Titanium retainers - 16 pcs. RET-027
Seats - 16 pcs. SEAT-V2093-16

700,00 €

Cometic VAG 1.8-2.0 8V-16V MLS Cylinder Head Gasket 85x1.3mm C4246-051

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

130,00 €

FCP 7mm lash cap for solid lifter

Part number FCPLC/7mm.
FCP Engineering lash cap used with solid lifter.
hardness HRC 55, inner diameter 7mm, over deck 5mm.

4,00 €

VW / Audi 1.8 2.0 16V KR PL 9A ABF FCP valve double springs kit

VW / Audi 1.8 2.0 16V KR PL 9A ABF ACE FCP valve spring set

Valve springs data
Installed seat pressure - 38kg
Load - [email protected]
Max. lift - up to 13mm
Made from chrome silicone steel SAE9254-V
Outer spring outer diameter: 30.50mm
Outer spring inner diameter: 23.20mm
Inner spring outer diameter: 21.20mm
Inner spring inner diameter: 16.20mm
16 pcs. outer springs
16 pcs. inner springs
Fits all 4 cylinder 1.8 2.0 16V VW / Audi engines KR, PL, 9A, ABF, ACE.
With this set the risk of valve flutter and a possible engine failure is minimized.
Recommended for engines with series and racing camshafts and over 7600 RPM.
Can also be used together with standard or FCP titanium retainers.

199,00 €

VW / Audi 1.8 2.0 16V KR PL ABF M11 ARP cylinder head stud kit 204-4204

ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.

223,00 €

VW 1.8 2.0 16V KR PL ABF Athena Cooper ring head gasket 83.8x1.6mm

Athena Racing 330 series Cooper Ring cylinder head gasket.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).
Part number 330327R
Gasket thickness: 1.60mm
Bore size: 83.80mm

Part number starting with 330
Athena advantages
Reinforced material	Asbestos free composite raw material OE approved
Stainless steel ring (AISI304)	Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required
Silicon beading	Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages

229,00 €