В корзине нет товаров
Part number BMIVN-1084 (STD)
Supertech black nitrided stainless steel intake valve
BMW - 2.5 12V (M20B25)
Must be used with triple groove valve keepers KPR-VW7-T or oem ones.
|
Product detailed specification |
|
|
Model number |
BMIVN-1084 |
|
Head diameter |
42.00mm |
|
Stem diameter |
6.97mm |
|
Length |
102.50mm |
|
Material |
Black nitrided stainless steel |
|
Fits for |
BMW 2.5L (M20B25) |
Подробная спецификация продукта:
Производитель: FCP Engineering
Модель: FCPRHB1304822
Профиль:профиль H
С на С: 130mm
Диаметр отверстия нижней головки: 48mm
Диаметр пальца: 22mm
Количество: 6 шт., 12 шт. ARP2000 болты
Сделано из:4340 EN24er cтали
Максимальная рекомендуемая мощность: 1000HP (6 cylinder)
Mаксимальные обороты RPM: 9000RPM
BMW E21, E28, E30, E34 - 2.0 2.3 2.7 (M20B20, M20B23, M20B27)
|
Product detailed specification |
|
|
Model number |
BMEVN-1084 |
|
Head diameter |
36.00mm |
|
Stem diameter |
6.95mm |
|
Length |
102.50mm |
|
Material |
Black nitrided stainless steel |
|
Fits for |
BMW 2.5L (M20B25) |
|
Product detailed specification |
|
|
Model number |
BMEVI-1085 |
|
Head diameter |
37.00mm |
|
Stem diameter |
6.95mm |
|
Length |
102.50mm |
|
Material |
Inconel |
|
Fits for |
BMW 2.5L (M20B25) |
|
Product detailed specification |
|
|
Model number |
BMIVN-1085 |
|
Head diameter |
43.00mm |
|
Stem diameter |
6.97mm |
|
Length |
102.50mm |
|
Material |
Black nitrided stainless steel |
|
Fits for |
BMW 2.5L (M20B25) |
|
Part number starting with 330 |
|
|
Athena advantages |
|
|
Reinforced material |
Asbestos free composite raw material OE approved |
|
Stainless steel ring (AISI304) |
Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required |
|
Silicon beading |
Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages |
ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.
| ENGINE BEARINGS | ||
 |
MAIN BEARING SET |
|
| Part# | ||
| 7M1532H |
7M1532HX |
|
| Sizes | STD, .025, .25, .50 | STD |
| Oil Clearance | Standard | + 0.001" Extra |
| Half Type | Upper & Lower | |
| Material | Tri-metal | |
| Min Std Shaft Size | 2.3611in / 59.971mm | |
| Max Std Shaft Size | 2.3618in / 59.990mm | |
| Min Std Tunnel Size | 2.5591in / 65.000mm | |
| Max Std Tunnel Size | 2.5598in / 65.019mm | |
| Max Wall at Crown | 0.0980in / 2.490mm | 0.0930in / 2.478mm |
| Max Overall Length |
0.787in / 20.00mm #1,2,3,4,5,7 0.982in / 24.94mm #6 thrust |
|
| Notes | ||
|
Diagram |
|
|
Engines BMW - 2.0 2.2 2.3 2.5 2.7 2.8 3.0 3.2 (M20 (just for variant with two bearing locks), M50B20, M52B20, M50B25, M52B25, M54B25, M54B30, M50B27, S50B30, S50B32, S52B32, S54B32)
