В корзине нет товаров
|
Product detailed specification |
|
|
Bore size |
84.25mm |
|
Stroke |
89.60mm |
|
Wiseco compression ratio (CR) |
9.0:1 |
|
OEM compression ratio (CR) |
10.2:1 |
|
Dome volume (CC) |
-7.3cm3 |
|
Compression height (CH) |
28.32mm |
|
Pin diameter |
22mm |
|
Features |
Accepts Turbo and Nitrous; Full Round Skirt |
|
Fits for |
BMW E46, E39 - 3.0 24V (M54B30) |
Подробная спецификация продукта:
Производитель: FCP Engineering
Модель: FCPRHB1354822-6
Профиль:профиль H
С на С: 135mm
| ENGINE BEARINGS | ||
 |
CON ROD BEARING SET |
|
| Part# | ||
| 6B1490H |
6B1490HX |
|
| Sizes | STD, .025, .25, .50 | STD |
| Oil Clearance | Standard | + 0.001" Extra |
| Half Type | Identical Halves | |
| Material |
Tri-metal Hardened steel backs |
|
| Min Std Shaft Size |
1.7707in / 44.975mm |
|
| Max Std Shaft Size |
1.7713in / 44.991mm |
|
| Min Std Tunnel Size |
1.8898in / 48.000mm |
|
| Max Std Tunnel Size |
1.8904in / 48.016mm |
|
| Max Wall at Crown |
0.0588in / 1.493mm |
0.0583in / 1.481mm |
| Max Overall Length |
0.709in / 18.00mm |
|
| Notes | ||
|
Diagram |
 |
|
| ENGINE BEARINGS | ||
|
MAIN BEARING SET |
|
| Part# | ||
| 7M1532H |
7M1532HX |
|
| Sizes | STD, .025, .25, .50 | STD |
| Oil Clearance | Standard | + 0.001" Extra |
| Half Type | Upper & Lower | |
| Material | Tri-metal | |
| Min Std Shaft Size | 2.3611in / 59.971mm | |
| Max Std Shaft Size | 2.3618in / 59.990mm | |
| Min Std Tunnel Size | 2.5591in / 65.000mm | |
| Max Std Tunnel Size | 2.5598in / 65.019mm | |
| Max Wall at Crown | 0.0980in / 2.490mm | 0.0930in / 2.478mm |
| Max Overall Length |
0.787in / 20.00mm #1,2,3,4,5,7 0.982in / 24.94mm #6 thrust |
|
| Notes | ||
|
Diagram |
|
|
Athena Racing 330 series Cooper Ring cylinder head gasket.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).
Part number: 330023R
Gasket thickness: 1.50mm
Bore size: 87.60mm
|
Part number starting with 330 |
|
|
Athena advantages |
|
|
Reinforced material |
Asbestos free composite raw material OE approved |
|
Stainless steel ring (AISI304) |
Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required |
|
Silicon beading |
Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages |
Athena Racing 330 series Cooper Ring cylinder head gasket.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).
|
Part number starting with 330 |
|
|
Athena advantages |
|
|
Reinforced material |
Asbestos free composite raw material OE approved |
|
Stainless steel ring (AISI304) |
Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required |
|
Silicon beading |
Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages |
|
Product detailed specification |
|
|
Bore size |
84.00mm |
|
Stroke |
89.60mm |
|
Wiseco compression ratio (CR) |
9.0:1 |
|
OEM compression ratio (CR) |
10.2:1 |
|
Dome volume (CC) |
-7.3cm3 |
|
Compression height (CH) |
28.32mm |
|
Pin diameter |
22mm |
|
Features |
Accepts Turbo and Nitrous; Full Round Skirt |
|
Fits for |
BMW E46, E39 - 3.0 24V (M54B30) |
|
Product detailed specification |
|
|
Bore size |
84.5mm |
|
Stroke |
89.60mm |
|
Wiseco compression ratio (CR) |
9.0:1 |
|
OEM compression ratio (CR) |
10.2:1 |
|
Dome volume (CC) |
-7.3cm3 |
|
Compression height (CH) |
28.32mm |
|
Pin diameter |
22mm |
|
Features |
Accepts Turbo and Nitrous; Full Round Skirt |
|
Fits for |
BMW E46, E39 - 3.0 24V (M54B30) |
Part number: FCPPB850090M54
Manufacturer: FCP Engineering
Forged high performance pistons for various applications in nearly all engine types for racing and street use.
Made of 4032-T6, piston skirt is molibden coated.
Each set of pistons also includes rings and HD series pins.
Bore size: 85.00mm
Compression ratio (CR): 9.0:1
Compression height: 30.50mm
Pin diameter: 22mm
Stroke: 89.60mm
BMW 330i, 530i (E46, E39) - 3.0 24V Turbo (M54B30)
Connecting rod length must be 135mm
Check distance between valves and piston to be 1mm at least with VVT engaged. Wrong installation will cause severe engine damage!
