BMW / Toyota B38 / B48 / B58 Supertech intake valve TIVN-1058 / MCIVN-1400S STD

BMW / Toyota B38 / B48 / B58 Supertech Exhaust valve TEVI-1058-HS /...

69,00 €

BMW / Toyota 3.0 Turbo B58 Supertech valve spring kit SPRK-B58B

Springs data:
Seat pressure - 77lbs @ 40.10mm
Open (lift) pressure - 180lbs @ 10mm
Spring coil bind - 27.00mm
Rate - 10.30lbs/mm
Max lift - 12.20mm
Outer spring outer diameter: 26.50mm
Outer spring inner diameter: 18.70mm
Inner spring outer diameter: 21.60mm
Inner spring inner diameter: 13.80mm

Set includes:
Dual springs: 24 pcs. SPR-FE20BE
Titanium retainers: 12 pcs. RET-BMB48/TE and 12 pcs. RET-BMB48/TI

999,00 €

BMW / Toyota B38 / B48 / B58 Supertech 6mm exhaust valve seal VSI-BM60-E

3,00 €

BMW / Toyota B38 / B48 / B58 Supertech 5mm intake valve seal VSI-BM50-I

3,00 €

BMW / Toyota 3.0 B58B30 S58B30 ACL Race Series connecting rod bearings...

209,00 €

BMW / Toyota 3.0 B58B30 S58B30 ACL Race Series connecting rod bearings 6B1510HX

209,00 €

BMW / Toyota 3.0 B58B30 S58B30 ACL Race Series connecting rod bearings...

209,00 €

Toyota / BMW 3.0 B58B30 JE Pistons kit CR 10.5 82mm 371718

Product detailed specification
Bore size	82.00mm
Stroke	94.60mm
JE Pistons compression ratio (CR)	10.5:1
OEM compression ratio (CR)	11.0:1
Dome volume (CC)	-11.10cm³
Compression height (CH)	33.25mm
Pin diameter	22mm
Features	Accepts Turbo and Nitrous
Fits for	Toyota / BMW - 3.0 Turbo (B58B30)

1 449,00 €

Toyota / BMW 3.0 B58B30 Mahle Piston kit CR 10.5 82mm 197883929

Product detailed specification
Bore size	82.00mm
Stroke	94.60mm
Mahle compression ratio (CR)	10.5:1
OEM compression ratio (CR)	11.0:1
Dome volume (CC)	-4cm³
Compression height (CH)	33.27mm
Pin diameter	22mm
Features	Accepts Turbo and Nitrous
Fits for	Toyota / BMW - 3.0 Turbo (B58B30)

1 349,00 €

Toyota / BMW 3.0 B58B30 JE Pistons kit CR 10.5 83mm 371720

Product detailed specification
Bore size	83.00mm
Stroke	94.60mm
JE Pistons compression ratio (CR)	10.5:1
OEM compression ratio (CR)	11.0:1
Dome volume (CC)	-11.10cm³
Compression height (CH)	33.25mm
Pin diameter	22mm
Features	Accepts Turbo and Nitrous
Fits for	Toyota / BMW - 3.0 Turbo (B58B30)

1 449,00 €

BMW / Toyota 3.0L B58 ARP main stud kit 201-5402

ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.

379,00 €

BMW / Toyota 3.0 B58B30 S58B30 ARP cylinder head stud kit 201-4701 / 203-4705

ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.

589,00 €

Kelford A90 Supra MK5 / BMW B58 (GEN2) camshaft set 270°/268° 10.30mm/10.15mm...

1 999,00 €

Kelford A90 Supra MK5 / BMW B58 (GEN2) camshaft set 285°/280° 10.30mm/10.60mm...

1 999,00 €

Kelford A90 Supra MK5 / BMW B58 (GEN2) camshaft set 288°/288° 10.35mm/10.80mm...

1 999,00 €

Kelford A90 Supra MK5 / BMW B58 Valve Springs & Retainers KVS58-BT

849,00 €

Kelford BMW Gen1 B58 | Valve Springs & Retainers KVS57-BT

849,00 €

Toyota / BMW B58B30 Athena Cooper Ring cylinder head gasket 84x1mm 330155R

Athena Racing 330 series Cooper Ring cylinder head gasket.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).
Part number: 330155R

Part number starting with 330
Athena advantages
Reinforced material	Asbestos free composite raw material OE approved
Stainless steel ring (AISI304)	Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required
Silicon beading	Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages

299,00 €

BMW 2.0 16V B48B20 FCP racing conical spring and retainer kit

Valve springs data
Installed seat pressure - 34kg (75lbs)
Load - 63kg@10mm (140lbs@10mm)
Max lift - up to 12mm
Made from chrome-silicon steel SAE9254-V
BMW - 2.0 16V Turbo B48B20
With this set the risk of valve flutter and a possible engine failure is minimized.
Recommended for engines with series and racing camshafts and over 7500 RPM.
Kit includes:
16 pcs. conical valve springs
8 pcs. titanium retainers 5mm
8 pcs. titanium retainers 6mm

539,00 €

BMW / Toyota 3.0 B58B30 S58B30 ARP CA625+ cylinder head stud kit 203-4706

ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.

1 299,00 €

BMW / Toyota Supra GR 3.0L B58 Athena Cooper Ring cylinder head gasket...

Athena Racing 330 series Cooper Ring cylinder head gasket.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).

Part number starting with 330
Athena advantages
Reinforced material	Asbestos free composite raw material OE approved
Stainless steel ring (AISI304)	Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required
Silicon beading	Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages

319,00 €

BMW / Toyota B38 / B48 / B58 Supertech intake valve TIVN-1058 / MCIVN-1400S STD

Вам также может понравиться