В корзине нет товаров
Aртикул детали FCPRHO14315221
FCP Engineering cтальные шатуны профиль H (4 шт.) 143.10mm
Opel / Vauxhall - 2.0 16V (C20XE, C20LET, Z20LET, Z20LEH, Z20LER)
Подробная спецификация продукта:
Производитель: FCP Engineering
Модель FCPRHO14315221
Профиль:профиль H
С на С: 143.1mm
Диаметр отверстия нижней головки: 52mm
Диаметр пальца: 21mm
Количество: 4 шт., 8 шт. ARP2000 3/8" болты
Сделано из:4340 EN24er cтали
Максимальная рекомендуемая мощность: 600HP (4 cylinder)
Mаксимальные обороты RPM: 9000RPM
Opel / Vauxhall - 2.0 16V (C20XE, C20LET, Z20LET, Z20LEH, Z20LER)
Opel Corsa C20LET 800+HP
Turbo: KKK31 boost 2.5bar
Вес: 740kg 1/4m. 9.6s!
| NGINE BEARINGS | ||
 |
CON ROD BEARING SET |
|
| Part# | ||
| 4B2322H |
4B2322HX |
|
| Sizes | STD, .025, .25, .50 | STD |
| Oil Clearance | Standard | + 0.001" Extra |
| Half Type | Upper & Lower | |
| Material |
Tri-metal Hardened steel backs |
|
| Min Std Shaft Size |
1.9280in / 48.971mm |
|
| Max Std Shaft Size | 1.9286 in / 48.987mm | |
| Min Std Tunnel Size |
2.0472in / 52.000mm |
|
| Max Std Tunnel Size |
2.0477in / 52.012mm |
|
| Max Wall at Crown |
0.0591in / 1.500mm |
0.0596in / 1.513mm |
| Max Overall Length |
0.760in / 19.30mm |
|
| Notes | Upper rod bearing has two oil holes to cover early and late engines. | |
|
Diagram |
 |
|
Lifter data:
Outer diameter - 31.97mm
Inner diameter - 30.00mm
Outer height - 26.30mm
Stem length - 14.70mm
Stud diameter - 7.00mm
Weight - 40g
16 pcs. FCP Engineering racing mechanical solid lifters.
Forged steel, nitride hardened surface, HRC 50.
Installed follower height to camshaft must be adjusted with lash caps (not included).
|
Part number starting with 330 |
|
|
Athena advantages |
|
|
Reinforced material |
Asbestos free composite raw material OE approved |
|
Stainless steel ring (AISI304) |
Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required |
|
Silicon beading |
Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages |
