В корзине нет товаров
Part number 297119
JE Pistons forged piston kit (6 pcs.) 87.00mm (STD) CR 12.5:1
BMW M3 E46 - 3.2 (S54B32)
|
Product detailed specification |
|
|
Bore size |
87.00mm |
|
Stroke |
91.00mm |
|
JE Pistons compression ratio (CR) |
12.5:1 |
|
OEM compression ratio (CR) |
11.3:1 |
|
Dome volume (CC) |
-8.70cm3 |
|
Compression height (CH) |
32.30mm |
|
Pin diameter |
21mm |
|
Features |
Accepts Turbo and Nitrous; FSR skirt |
|
Fits for |
BMW M3 E46 3.2 S54B32 |
Athena Racing 330 series Cooper Ring cylinder head gasket.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).
Part number 330037R
Gasket thickness: 1.20mm
Bore size: 87.50mm
|
Part number starting with 330 |
|
|
Athena advantages |
|
|
Reinforced material |
Asbestos free composite raw material OE approved |
|
Stainless steel ring (AISI304) |
Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required |
|
Silicon beading |
Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages |
Подробная спецификация продукта:
Производитель: FCP Engineering
Модель: FCPRH1395321/S54
Профиль:профиль H
С на С: 139mm
Диаметр отверстия нижней головки: 53mm
Диаметр пальца: 21mm
Количество: 6 шт., 12 шт. 3/8" ARP2000 болты
Сделано из:4340 EN24er cтали
Максимальная рекомендуемая мощность:: 1000HP (6 cylinder)
Mаксимальные обороты RPM: 9000RPM
BMW M3 E46 - 3.2 (S54B32)
|
Product detailed specification |
|
|
Bore size |
87.00mm |
|
Stroke |
91.00mm |
|
JE Pistons compression ratio (CR) |
11.5:1 |
|
OEM compression ratio (CR) |
11.3:1 |
|
Dome volume (CC) |
-13.20cm3 |
|
Compression height (CH) |
32.30mm |
|
Pin diameter |
21mm |
|
Features |
Accepts Turbo and Nitrous; FSR skirt |
|
Fits for |
BMW M3 E46 - 3.2 S54B32 |
|
Product detailed specification |
|
|
Bore size |
87.50mm |
|
Stroke |
91.00mm |
|
JE Pistons compression ratio (CR) |
12.5:1 |
|
OEM compression ratio (CR) |
11.3:1 |
|
Dome volume (CC) |
-9.20cm3 |
|
Compression height (CH) |
32.30mm |
|
Pin diameter |
21mm |
|
Features |
Accepts Turbo and Nitrous; FSR skirt |
|
Fits for |
BMW M3 E46 3.2 S54B32 |
|
Product detailed specification |
|
|
Bore size |
87.25mm |
|
Stroke |
91.00mm |
|
Wiseco pistons compression ratio (CR) |
11.1:1 |
|
OEM compression ratio (CR) |
11.3:1 |
|
Dome volume (CC) |
-14.00cm3 |
|
Compression height (CH) |
32.00mm |
|
Pin diameter |
21mm |
|
Features |
Accepts Turbo and Nitrous; Full round piston skirt |
|
Fits for |
BMW M3 E46 - 3.2 S54B32 |
The Xtreme Clutch 230mm Race Clutch is available with either ceramic, organic or carbon friction materials, making these kits ideal for high horsepower and motorsport applications where a high heat capacity is required.
The Xtreme 230mm Race Clutch is the ultimate in clutch solutions with a range like no other. The 230mm range boasts a variety of kits to suit most high horsepower applications for street, circuit, drift or race use. The Xtreme 230mm Race Clutch has been designed, allowing for endless options with clutch operation with internal hydraulic options and pull-push conversions a factoring feature in the 230mm range.
| Flat Diaphragm | Rolled Diaphragm | |
| Clamping Force | 1300kg | 1300kg |
| Torque Rating | 1800Nm | 1800Nm |
| Bearing Contact Diameter | 65mm | FLAT BEARING |
| Bearing Load (@ 48mm) | 180kg | 150kg |
| Release Travel Required | 7mm | 7mm |
| Assembly Mass (without flywheel) | 8.30kg | 8.30kg |
| Disc Set Static Mass | 2.25kg | 2.25kg |
| Friction Thickness New | 8mm (0.315") | 8mm (0.315") |
| Friction Thickness Worn | 7.5mm (0.295") | 7.5mm (0.295") |
