Home

Mercedes EVO 1 M102E23 Wiseco Schmiedekolben 96mm CR 8.5 KE230M96

Product detailed specification
Bore size	96.00mm
Stroke	80.25mm
Wiseco compression ratio (CR)	8.5:1
OEM compression ratio (CR)	9.7:1-10.5:1
Dome volume (CC)	-10cm³
Compression height (CH)	38.90mm
Pin diameter	22mm
Fits for	Mercedes EVO 1 - 2.3 16V (M102E23)

Wiseco ArmorGlide skirt coating is a dry film lubricant applied to the piston skirt. This coating helps reduce friction, improving performance, and will also help quiet the piston in the cylinder bore. This coating is permanently applied, and is not a break in coating, it is on the piston for the life of the part.

829,00 €

Mercedes EVO 2 M102E25 Wiseco Schmiedekolben 95.5mm CR 9.0 KE228M96

Product detailed specification
Bore size	96.00mm
Stroke	87.20mm
Wiseco compression ratio (CR)	9.0:1
OEM compression ratio (CR)	9.7:1
Dome volume (CC)	-10cm³
Compression height (CH)	34.10mm
Pin diameter	22mm
Fits for	Mercedes EVO 2 - 2.5 16V (M102E25)

Wiseco ArmorGlide skirt coating is a dry film lubricant applied to the piston skirt. This coating helps reduce friction, improving performance, and will also help quiet the piston in the cylinder bore. This coating is permanently applied, and is not a break in coating, it is on the piston for the life of the part.

829,00 €

Toyota Supra 3.0 2JZGTE Wiseco Schmiedekolben kit CR 8.4 86.5mm K550M865AP

Product detailed specification
Bore size	86.50mm
Stroke	86.00mm
Wiseco compression ratio (CR)	8.4:1
OEM compression ratio (CR)	8.5:1
Dome volume (CC)	-14.8cm³
Compression height (CH)	34.00mm
Pin diameter	22mm
Features	Accepts Turbo and Nitrous; Full Round Skirt
Fits for	Toyota Supra - 3.0 (2JZGTE)

Armor Plated wiseco pistons have almost a bronze colored tint to the top of the piston and the wrist pin bore. Wiseco's Armor Plating is an abrasion resistant plating that raises the hardness of the aluminum, increases the durability of the ring grooves, prevents micro-welding of the piston rings, reduces carbon buildup and combats corrosion caused by detonation. Wiseco's most popular pistons now include Armor Plating.

1.199,00 €

Ford Cosworth 2.0L 16V Wiseco Schmiedekolben CR 8 91mm KE103M91AP

Product detailed specification
Bore size	91.00mm
Stroke	76.95mm
Wiseco compression ratio (CR)	8.0:1
OEM compression ratio (CR)	8.0:1
Dome volume (CC)	-20.2cm³
Compression height (CH)	40.80mm
Pin diameter	24mm
Features	Accepts Turbo and Nitrous; Full Round Skirt
Fits for	Ford Cosworth Escort / Sierra - 2.0 16V (YB/N5)

Armor Plated wiseco pistons have almost a bronze colored tint to the top of the piston and the wrist pin bore. Wiseco's Armor Plating is an abrasion resistant plating that raises the hardness of the aluminum, increases the durability of the ring grooves, prevents micro-welding of the piston rings, reduces carbon buildup and combats corrosion caused by detonation. Wiseco's most popular pistons now include Armor Plating.

829,00 €

Fiat / Lancia Integrale 2.0 16V Wiseco Schmiedekolben CR 8.5 85.5mm KE219M855

Product detailed specification
Bore size	85.50mm
Stroke	90.00mm
Wiseco compression ratio (CR)	8.5:1
OEM compression ratio (CR)	8.0:1
Dome volume (CC)	-10cm³
Compression height (CH)	38.94mm
Pin diameter	22mm
Features	Accepts Turbo and Nitrous; Full Round Skirt
Fits for	Lancia Delta HF Integrale / Fiat Coupe turbo 16V 2.0 16V (HF Integrale 16V)

Wiseco ArmorGlide skirt coating is a dry film lubricant applied to the piston skirt. This coating helps reduce friction, improving performance, and will also help quiet the piston in the cylinder bore. This coating is permanently applied, and is not a break in coating, it is on the piston for the life of the part.

829,00 €

Audi / VW 2.0 TSI EA888 JE Pistons beschichteten Schmiedekolben FSR 82.5mm...

Product detailed specification
Bore size	82.50mm
Stroke	92.80mm
JE Pistons compression ratio (CR)	9.6:1
OEM compression ratio (CR)	9.6:1
Dome volume (CC)	-7.1cm³
Compression height (CH)	29.60mm
Pin diameter	21mm
Features	Accepts Turbo and Nitrous; coated FSR series
Fits for	Audi / VW 2.0 16V TSI chain driven engines EA888 (CAWA, CAWB, CCTA, CCZB, CAEA)

JE's patented Perfect Skirt coating makes piston slap, false knock, and cold-start wear a thing of the past.
For the first time ever, 2618-alloy pistons can be installed with piston-to-wall clearances near that of an OEM piston!

899,00 €

ARP Pleuelschrauben Dehnungsmesser 100-9942

This gauge has been developed to provide optimum accuracy in determining the correct pre-load in the installed rod bolt. The products main purpose is to obtain the proper torque load when installed in the engine, and monitoring the condition of the bolt while in use. This is particularly useful if an engine is internally monitored regularly.

312,00 €

VAG 1.8T 20V bronze FCP Ventilführungen Satz

Teilenummer: FCPVGA1.8T/20
Material: Bronze
Länge: 36mm
Innendurchmesser: 6mm
Außendurchmesser: 11.06mm
Für Einlass- und Auslassventile

99,00 €

Honda B16A B17A B18C Supertech Auslassventil HEVN-100F

Product detailed specification
Model number	HEVN-100F
Head diameter	28.00mm
Stem diameter	5.45mm
Length	102.50mm
Material	Black nitrited stainless steel
Fits for	Honda B16A B17A B18C

28,00 €

BMW 3.0 M54B30 Turbo FCP Schmiedekolben 85mm CR 9.0

Teilenummer: FCPPB850090M54
Hersteller: FCP Engineering
Geschmiedete Hochleistungskolben für verschiedene Anwendungen in allen Motorvarianten für Rennsport und Straßengebrauch.
Hergestellt aus 4032-T6, Kolbenhemd sind Molibden beschichtet.
Jeder Satz enthält auch Ringe und HD-Serie Kolbenbolzen.
Bohrungdurchmesser: 85.00mm
Verdichtung (CR): 9.0:1
Kompressionhöhe: 30.50mm
Kolbenbolzen: 22mm
Kurbelwellenhub: 89.60mm
BMW 330i, 530i (E46, E39) - 3.0 24V Turbo (M54B30)
Pleuellänge muss sein 135mm

Check distance between valves and piston to be 1mm at least with VVT engaged. Wrong installation will cause severe engine damage!

1.169,00 €

Turbosmart GenV Compgate 40 externes Wastegate 14psi Schwarz TS-0552-1012

Modular
The 5th series wastegate range has been designed for maximum user-adjustability, without compromising performance. We designed our new unit to allow actuators to be interchangeable across the range. So, if you need a large wastegate in a tight space you can run a smaller actuator on the larger body. Additionally, if you decide to upgrade your new wastegate to a Motorsport or compressed gas-only actuator you can with an upgrade kit.
Adjustability
The unique variable adjustment design allows the wastegate actuator base to be oriented independently from the weld flanges. The cap is also completely independent and indexable in 12 different positions compared to the actuator base and body. This allows the wastegate to be fitted in confined positions without compromising packaging for fittings or aligning the cap.
Upgrades and Servicing
Due to the modular construction, the new range is also upgradeable and completely serviceable, as all components can be removed or upgraded. Components have been tested for over one million cycles so reliability will be rock-solid.
Flow and Thermal Performance
Our new range of wastegates out-flow all competitors thanks to our world-leading engineering and simulation abilities. Thermal performance has been improved drastically compared to our nearest rival, and all wastegates feature liquid cooling ports for further thermal performance if required
Control
For fine-tuning, boost performance, a selection of springs will be supplied with each wastegate. All wastegates feature 1/8″ NPT ports for maximum response and flow while maintaining a high level of compatibility for fittings.

Product features summary:

Modular interchangeable actuators
Independently orientated actuator base
New strap type V band clamps
Increased thermal and flow performance, and;
A diaphragm design that offers linear travel; regardless of spring, pressure and valve positioning, while improving response.
Integrated water cooling ports (if required)

Included in box:

Turbosmart Gen V Wastegate
Valve seat
Inlet V-band clamp
Inlet weld flange
Outlet V-band clamp
Outlet weld flange
Collar tool
Spring kit
Fitting kit

439,00 €

Depo Racing digital Wassertemperatur Anzeige 52mm D-BL5237B

Teilenummer D-BL5237B
Depo Racing digital 52mm Wassertemperatur Anzeige, getönte Linse, Blaue LED-Beleuchtung

45,00 €

Depo Racing elektrischer Turbo Ladedruck / Vakuumsensor CS0171

Teilenummer CS0171
Depo Racing elektrischer Turbo Ladedruck/Vakuumsensor (Sensorkabel - 15cm)

33,00 €

Subaru BRZ / Toyota GT86 FA20 Supertech Ventilfedersatz SPRK-100-BRZ

Ventilfedern Daten:

Sitzdruck - 85lbs @ 33.5mm
Druck geoffnet - 212lbs @ 10mm
Min. Federhöhe (im gepressten Zustand) - 18.50mm
Federrate - 12.50lbs/mm
Max Hub - 15.00mm
Außendurchmesser der äußeren Feder: 30.20mm
Innendurchmesser der äußeren Feder: 22.20mm
Außendurchmesser der inneren Feder: 22.20mm
Innendurchmesser der inneren Feder: 16.80mm

Satz enthält:
Doppelventilfedern: 16 pcs. SPR-100-BRZ
Ventilfederteller: 16 pcs. RET-H1000-BRZ
Sitze: 16 pcs. SEAT-H1002-BRZ

630,00 €

Mini Cooper S 1.6 W11B16A Supertech Einlassventil MCIVN-1005S +0.5mm

Product detailed specification
Model number	MCIVN-1005S
Head diameter	30.70mm
Stem diameter	5.94mm
Length	109.58mm
Material	Black nitrited stainless steel
Fits for	Mini Cooper S - 1.6 Supercharged (W11B16A)

29,00 €

VW / Audi 2.0 16V TSI TFSI FCP Ventilfeder und titan Federteller Kit

Feder Daten:
Druck Ventilsitz - 82lbs @ 37.00m
Druck geöffnet - 180lbs @ 10mm
Min. Federhöhe (im gepressten Zustand) - 24.90mm
Max Hub - 11.90mm
Federrate - 10.20lbs/mm
Außendurchmesser - 24.00mm
Innendurchmesser - 16.50mm

Satz enthält:
Einzelne Federn - 16 Stk.
Titan Federtellern - 16 Stk.

449,00 €

Audi S6 / RS6 C7 4.0 TFSI V8 FCP Ventilfeder Kit

Spring data:
Seat pressure - 70lbs @ 38.40mm (intake), 82lbs @ 37.00mm (exhaust)
Open (lift) pressure - 172lbs @ 10mm (intake), 180lbs @ 10mm (exhaust)
Max lift - 11.90mm (intake), 10.60mm (exhaust)
Spring coil bind - 24.90mm
Rate - 10.20lbs/mm
Spring outer diameter - 24.00mm
Spring inner diameter - 16.50mm

Set includes:
Single springs - 32 pcs.

499,00 €

VW 2.8 12V VR6 FCP Ventilfeder und titan Federteller Kit

Ventilfedern Daten
Installierte Sitzdruck - 38kg
Last - 100kg@12.5mm
Max. Aufzug - bis zu 13mm
Hergestellt aus Chrom-Silizium Stahl SAE9254-V
Außendurchmesser der äußeren Feder: 30.50mm
Innendurchmesser der äußeren Feder: 23.20mm
Außendurchmesser der inneren Feder: 21.20mm
Innendurchmesser der inneren Feder: 16.20mm
12 Stk. äußere Federn
12 Stk. innere Federn
12 Stk. titan Federtellern
Mit diesem Satz wird das Risiko des Ventilflatterns und moglichen Motorschadens minimiert.
Für Motoren mit Serien und Renn Nockenwellen und denen Drehzahlen von über 7600RPM.
Federtelern sind sehr stark und leicht, Gewicht ist nur 10g.

299,00 €

Subaru BRZ / Toyota GT86 2.0 FA20 ARP Zylinderkopf Stehbolzensatz 260-4301

ARP sind ein Hersteller von Verbindungselementen (Bolzen und Stehbolzen) im Motoren und Antriebsstränge, die von OEM-Ersatzteile zu Spezialhardware für den Rennsport gefunden. ARP ist weltweit führend in der Befestigungstechnik.

346,00 €

Mini Cooper S 1.6 Prince N12 N14 N16 N18 ACL Race Pleullagersatz 4B7787HX-STD

119,00 €

Opel 2.0 16V Turbo Z20LET/LEH/LER FCP Schmiedekolben CR 8.5 86.25mm

Teilenummer: FCPPOZ8625085
Hersteller: FCP Engineering
Geschmiedete Hochleistungskolben für verschiedene Anwendungen in allen Motorvarianten für Rennsport und Straßengebrauch.
Hergestellt aus 4032-T6, Kolbenhemd sind Molibden beschichtet.
Jeder Satz enthält auch Ringe und HD-Serie Kolbenbolzen.
Bohrungdurchmesser: 86.25mm
Verdichtung (CR): 8.5:1
Kompressionhöhe: 30.40mm
Kolbenbolzen: 21mm
Kurbelwellenhub: 86.00mm
Opel / Vauxhall - 2.0 16V Turbo (Z20LET, Z20LER, Z20LEH, Y20LET)

Pleuellänge muss 143.1mm sein

769,00 €

K04-064 Turbolader Audi S3 2.0 TFSI

Dieser Turbolader kann nahezu ohne Änderungen 1:1 gegen den Serienturbo aller Quer eingebauten TFSI Motoren bis 200PS getauscht werden. Es handelt sich um einen originalen AUDI S3 / TTS (265PS) KKK K04 Turbolader mit Abgaskrümmer im Verbund.

899,00 €

Audi S2 RS2 S4 S6 2.2T 20V Victor Reinz Zylinderkopfbolzen Satz 14-32049-01

Teilenummer 14-32049-01
Victor Reinz Zylinderkopfbolzen Satz
Audi S2, RS2, S4, S6 - 2.2T 20V

49,00 €

VW 2.8 VR6 24V Victor Reinz Zylinderkopfbolzen Satz 14-32129-02

Teilenummer 14-32129-02
Victor Reinz Zylinderkopfbolzen Satz
VW 2.8 24V VR6

59,00 €