Turbochargers

Turbosmart BOV / Blov-Off Valve Race Port Gen V Blue TS-0204-1131

Supplied with:

    * Vacuum fittingsprofiled alloy weld flange, V-band assembly, and Blue Spring Rated -18 to -14 InHg (installed)
    * Billet 6000 series aluminium construction
    * Quick release v-band collar for ease of installation and removal
    * 2.0" Inlet flows over 330 CFM
    * MILSPEC hard anodized valve guide and stem
    * Hi Temp Silicon Nomex diaphragm
    * Positive sealing valve seat
    * Twin 1/8"NPT pressure ports for convenient positioning
    * Collar secured cap for quick spring changes
    * 4inHg to 26inHg activation range
    * 5 user configurable corrosion resistant springs available
    * Valve position sensor option
    *Designed, manufactured and validated in-house at Turbosmart HQ

Large capacity turbocharger systems and high horsepower engines. Ideal for circuit and drag vehicles and trucks.

€325.00

Turbosmart Boost-Tee Boost Controller Blue TS-0101-1001

Smaller and lighter than other Manual Boost Controllers on the market. Set your boost and forget it. Boost adjustable from under the hood with an accurate, proven Detent System. Easy to install and adjust.
The Turbosmart Gated Boost Control Valve range is one of the best dollar for horsepower upgrades that you can make to your turbocharged petrol or diesel engine vehicle.
All Turbosmart Gated Boost Controllers feature our exclusive Gate feature which minimizes wastegate creep and can improve turbo response by up to 800 rpm earlier in the rev range – this means that you can increase the performance and response from your engine without even raising the maximum boost level.
Stable increases in boost over wastegate spring pressure of 200%+ for internal wastegate and 100% for external wastegates are common practice using our manual boost controllers.
Manufactured from high-grade brass and billet aluminium and are renowned for their easy installation, robust design, stability and our detent adjustment system allows for accurate and simple tuning of boost pressure.
The Turbosmart Gated Boost Control Valve range is ideal for mildly modified turbocharged engines and perfect for increasing boost levels on factory turbo cars and turbocharged engines.

€79.00

Turbosmart Comp-Gate 40 External Wastegate Blue

Turbosmart Comp-Gate 40 external wastegate 14psi Blue TS-0505-1009

Stay in total control of your turbo with the Turbosmart Comp-Gate 40 External Wastegate Actuator (14PSI model).
This 40mm wastegate is a full 25% smaller than the previous models to fit even the tightest engine compartments.
Turbosmart’s ingenious locking collar makes it easy to swap out your Comp-Gate’s springs to match your desired boost (springs sold separately).
Set the locking collar in any one of 12 indexed positions for easy adjustments.
Built for optimal flow, enhanced thermal resistance and race-ready durability.
Pairs with factory and aftermarket turbos—bolts right up to 1.75” outside diameter pipes.
Available in finishes that add race-inspired style to your ride's engine compartment.
Comes complete with a valve seat, gaskets, nuts, bolts, vacuum fittings, two 1/16 NPT blanking plugs, two 1/16 vacuum nipples and a collar removal tool.

€385.00

Turbosmart eB2 4 Port boost solenoid TS-0301-2003

* Replacement solenoid Kit for e-Boost2
* Suits all e-Boost2 models
* Supplied with 4-port solenoid, fittings and a mounting bracket
* Ideal for the active enthusiast
* Widely used in performance engines

€129.00

Turbosmart billet oil feed filter Black 44um -4AN TS-0804-1002

€39.00

Turbosmart Comp-Gate 40 External Wastegate Black

Turbosmart Comp-Gate 40 external wastegate 14psi Black TS-0505-1010

Stay in total control of your turbo with the Turbosmart Comp-Gate 40 External Wastegate Actuator (14PSI model).
This 40mm wastegate is a full 25% smaller than the previous models to fit even the tightest engine compartments.
Turbosmart’s ingenious locking collar makes it easy to swap out your Comp-Gate’s springs to match your desired boost (springs sold separately).
Set the locking collar in any one of 12 indexed positions for easy adjustments.
Built for optimal flow, enhanced thermal resistance and race-ready durability.
Pairs with factory and aftermarket turbos—bolts right up to 1.75” outside diameter pipes.
Available in finishes that add race-inspired style to your ride's engine compartment.
Comes complete with a valve seat, gaskets, nuts, bolts, vacuum fittings, two 1/16 NPT blanking plugs, two 1/16 vacuum nipples and a collar removal tool.

€385.00

TurboSystems HTX2551B1 hybrid turbocharger

✪ Compressor side Technical features:

Compressor wheel: 9+0 blades machined from the solid billet
Inducer: 51mm
Exducer: 63mm

✪ Turbine side Technical features:

Housing: 8cm2 / AR: 0.61
Turbine wheel: 9 blades
Inducer: 54mm
Exducer: 47mm

€799.00

Turbosmart BOV Kompact plumb back 25mm TS-0203-1222

Full recirculating BOV. The Plumb Back system recirculates all excess pressure back into the intake system. Great for enthusiasts not wanting to be noticed but wanting the performance and reliability benefits of a quality BOV.

€129.00

TurboSystems HTX2651B1W hybrid turbocharger

✪ Compressor side Technical features:

Compressor wheel: 9+0 blades machined from the solid billet
Inducer: 51mm
Exducer: 63mm

✪ Turbine side Technical features:

Housing: 8cm2 / AR: 0.61
Turbine wheel: 10 blades
Inducer: 55mm
Exducer: 49mm

€899.00

Turbosmart 1200-6 AN fuel pressure regulator TS-0401-1103 (blue)

Turbosmart's newest High-performance EFI fuel pressure regulator is smaller, lighter and better! Featuring two -6AN inlet ports, one -6AN return port, and one 1/8 NPT gauge port, 30-90 PSI base pressure adjustment, 1:1 ratio, premium diaphragm and stainless steel valve + seat allow for ANY fuel type including E85 and is suitable for engines with up to 1200hp fuel systems. FPR's feature a non-directional bias to regulation, so no matter where the fuel comes in they will regulate the same. Factory tested.

Supplied with: Mounting bracket and retaining clip, vacuum fitting and gauge port blank.

    EFI fuel regulator
    3 x -6AN ports
    1/8" NPT gauge port
    Capable of regulating up to 1200hp of fuel flow
    1:1 manifold pressure ratio with no load losses
    30-90psi base pressure range
    Stainless steel internals providing maximum integrity and reliability
    Suitable for all fuel types
    Operational between -35ºC to +200ºC
    MILSPEC diaphragm
    Bracket and retaining clip supplied
    Pressure port 1/16 NPT with nipple supplied
    Manufactured, assembled and validated in-house at Turbosmart HQ

€249.00

Turbosmart BOV Big Bubba BPV Sleeper TS-0204-1203

Big Bubba features:

CNC billet aluminium body and components
Huge 50.8mm/2” inlet and outlet
Lightweight 52mm (2.05”) hard anodised aluminium two-piece piston
-4AN threaded vacuum port
V-band mounting system interchangeable with the Race Port
Weighs only 790 grams (1.7lbs)
Designed, manufactured and validated in-house at Turbosmart HQ

Supplied With:
Alloy Hose Adapter/Weld Flange, V-Band Clamp, and Green Spring Rated -12 to -8 InHg (installed).

€420.00

Turbosmart GenV Compgate 40 external wastegate 14psi Blue TS-0552-1011

Modular
The 5th series wastegate range has been designed for maximum user-adjustability, without compromising performance. We designed our new unit to allow actuators to be interchangeable across the range. So, if you need a large wastegate in a tight space you can run a smaller actuator on the larger body. Additionally, if you decide to upgrade your new wastegate to a Motorsport or compressed gas-only actuator you can with an upgrade kit.
Adjustability
The unique variable adjustment design allows the wastegate actuator base to be oriented independently from the weld flanges. The cap is also completely independent and indexable in 12 different positions compared to the actuator base and body. This allows the wastegate to be fitted in confined positions without compromising packaging for fittings or aligning the cap.
Upgrades and Servicing
Due to the modular construction, the new range is also upgradeable and completely serviceable, as all components can be removed or upgraded. Components have been tested for over one million cycles so reliability will be rock-solid.
Flow and Thermal Performance
Our new range of wastegates out-flow all competitors thanks to our world-leading engineering and simulation abilities. Thermal performance has been improved drastically compared to our nearest rival, and all wastegates feature liquid cooling ports for further thermal performance if required
Control
For fine-tuning, boost performance, a selection of springs will be supplied with each wastegate. All wastegates feature 1/8″ NPT ports for maximum response and flow while maintaining a high level of compatibility for fittings.

Product features summary:

Modular interchangeable actuators
Independently orientated actuator base
New strap type V band clamps
Increased thermal and flow performance, and;
A diaphragm design that offers linear travel; regardless of spring, pressure and valve positioning, while improving response.
Integrated water cooling ports (if required)

Included in box:

Turbosmart Gen V Wastegate
Valve seat
Inlet V-band clamp
Inlet weld flange
Outlet V-band clamp
Outlet weld flange
Collar tool
Spring kit
Fitting kit

€385.00