Home

Cometic Nissan RB30 3.0 1989-93 MLS cilindrų galvos tarpinė 87x1.3mm C4323-051

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

245,00 EUR

Turbosmart Gen-V WG45/50 Diafragmos rem. komplektas TS-0550-3005

125,00 EUR

Subaru EJ18 EJ20 EJ22 EJ25 ACL Race pagrindiniai indėklai 5M8309H-0.50

	MAIN BEARING SET
	Part#
	5M8309H	5M8309HX
Sizes	STD, .025, .25, 0.5	STD
Oil Clearance	Standard	+ 0.001" Extra
Half Type	Identical Halves
Material	Tri-Metal
Min Std Shaft Size	2.3616in / 59.984mm
Max Std Shaft Size	2.3622in / 60mm
Min Std Tunnel Size	2.5197in / 64mm
Max Std Tunnel Size	2.5205in / 64.02mm
Max Wall at Crown	0.0789in / 2.005mm	0.0784in / 1.992mm
Max Overall Length	0.748in / 19mm (8297H/HX) 0.5953in / 15.12mm (8298H/HX) 0.9035in / 22.95mm (8309H/HX - Flange)
Notes	Thrust in #5 pos.
Diagram (Top View)

Engines: Subaru - 1.8 2.0 2.2 2.5 (EJ18, EJ20, EJ22, EJ25, EJ20T, EJ20TT, EJ22T, EJ25T for thrust in #5 position)

149,00 EUR

Ecumaster battery isolator AS-SR M8 Rev.2

•Weight: 83g
•Dimensions: 50mm x 100mm x 38.5mm
•Voltage range: 6V – 19V, 28V transient
(12V automotive installations only)
•Operating temperature range: -40C + 125C
•Current capability: 300A continuous, peak up to 1000A
•Current measurement resolution 4A
•Current measurement range: -1000A to 1000A
•Current measurement accuracy: ±10%
•Inductive load switching capability: 600mJ
•Enclosure: Anodized aluminium, IP67 rated
• High current terminals: M8 nickel plated terminals
or Radlok connectors
•Signal connector: Deutsch ASX202-06PN
(mating plug ASX602-06SN included)
•Power save state current consumption: <1mA
•ON state current consumption: ~20mA
•Engine kill output: 3A, High (VBat), Low (GND) or Hi-Z

499,00 EUR

Audi / VW 2.0 TFSI EA113 FCP plieniniai kaltiniai švaistikliai 144mm/20mm...

Detali informacija

Gamintojas: FCP Engineering
Modelis: FCPRXATFSI14450620
Profilis: X-beam
Atstumas tarp centrų: 144mm
Didžiosios skylės diametras: 50.6mm
Piršto diametras: 20mm
Didžiosios skylės plotis: 24.95mm
Kiekis: 4 vnt., 8 vnt. ARP2000 3/8" varžtai
Pagaminta iš: Kaltinio plieno 4340 EN24er
Rekomenduojama galia: 800HP (4 cylinder)
Maksimalūs variklio sūkiai: 9000RPM
AUDI / VW - 2.0 16V TFSI (EA113)

549,00 EUR

Honda 2.0 2.4 K20 K24 Supertech išmetimo vožtuvas HEVN-1021F +0.5mm

Product detailed specification
Model number	HEVN-1021F
Head diameter	30.50mm
Stem diameter	5.45mm
Length	108.65mm
Material	Black nitrited stainless steel
Fits for	Honda K20 K24

24,00 EUR

FCP dovanų kuponas 200 eurų

200,00 EUR

Audi S4 RS4 3.0 V6 Biturbo Stroker FCP kaltiniai stūmokliai 83mm CR 8.5

Modelis: FCPPA830085RS4STR
Gamintojas: FCP Engineering
FCP stūmokliai gaminami iš sustiprinto 4032-T6 lydinio (su papildomais Cu, Ni ir Mg), kuris turi mažą šiluminį plėtimąsi, yra itin atsparus dėvėjimuisi ir didesniems šilumos kiekiams. Stūmoklio sijonai dengti molibdenu.
Komplekte yra stūmoklių žiedai ir HD serijos pirštai.
Stūmoklio diametras: 82.50mm
Suspaudimo laipsnis (CR): 8.5:1
Kompresinis aukštis: 27.50mm
Piršto diametras: 21mm
Stūmoklio eiga: 92.80mm
Audi S4 RS4 - 3.0 30V Biturbo Stroker

1 169,00 EUR

Audi / VW 2.0 16V TSI EA888 JE Pistons stūmokliai FSR Ultra Series CR 9.6...

Product detailed specification
Bore size	82.50mm
Stroke	92.80mm
JE Pistons compression ratio (CR)	9.6:1
OEM compression ratio (CR)	9.6:1
Dome volume (CC)	-5.7cm³
Compression height (CH)	29.30mm
Pin diameter	21mm
Features	Accepts Turbo and Nitrous; Ultra series
Fits for	Audi / VW 2.0 16V TSI chain driven engines EA888 (CAWA, CAWB, CCTA, CCZB, CAEA)

1 069,00 EUR

Turbosmart Kompact Dual Port BOV 2.0L TFSI VAG OEM replacement TS-0203-1041

Application:
Audi A3 1.8 TFSI 2004-current
Audi A3 2.0 TFSI 2004-current
Audi A4 1.8 TFSI 2004-current
Audi A4 2.0 TFSI 2004-current
Audi A6 2.0 TFSI 2004-current
Audi TT 2.0 TFSI 2006-current
VW Golf GTi MK5 2.0L 2003-2009
VW Golf GTi MK6 2.0L 2009-2013
VW Golf R Mk6 2.0L 2009-2013
VW Scirocco R Mk6 2008-current

299,00 EUR

Mitsubishi 4G63T 4G64 ACL Race Calico pagrindiniai indėklai 5M1219HC-STD

Sizes	STD, .025, .25
Oil Clearance	Standard
Half Type	Upper & Lower
Material	Tri-Metal
Min. Std Shaft Size	2.2435in / 56.985mm
Max. Std Shaft Size	2.2441in / 57.000mm
Min. Std Tunnel Size	2.4016in / 61.000mm
Max. Std Tunnel Size	2.4024in / 61.021mm
Max Wall at Crown	0.0783in / 1.990mm
Max Overall Length	0.8268in / 21.00mm
Notes	For engines equipped with thrust washers

CT-1 is a Dry Film Lubricant coating that helps reduce friction and abrasive wear. It provides intermittent dry lubrication and is not affected by dust or dirt. CT-1 is specifically engineered to withstand the extreme conditions of today's high performance engines. Professional engine builders enjoy a higher level of confidence with increased embedability, strength and durability.

199,00 EUR

Nissan 180SX CA18DET Wiseco kaltiniai stūmokliai CR 8.5 83.50mm K630M835

Product detailed specification
Bore size	83.50mm
Stroke	83.60mm
Wiseco compression ratio (CR)	8.5:1
OEM compression ratio (CR)	8.0:1
Dome volume (CC)	-0.5cm³
Compression height (CH)	29.75mm
Pin diameter	20mm
Features	Accepts Turbo and Nitrous
Fits for	Nissan 180SX (S13) 1.8 16V (CA18DET)

799,00 EUR