В корзине нет товаров
Part number FCPVSA1.8T/20
FCP Engineering high performance valve double spring kit
Audi / VW - 1.8T 20V, 2.0 20V (4 cylinder)
ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.
Spring data:
Seat pressure: intake - 60lbs @ 36.60mm, exhaust - 80lbs @ 33.20mm
Spring coil bind: intake - 23.00mm, exhaust - 19.50mm
Max lift: intake - 13.60mm, exhaust - 13.70mm
Rate: intake - 6.70lbs/mm, exhaust - 10.00lbs/mm
Intake single spring:
Outer diameter - 20.60mm
Inner diameter - 14.40mm
Exhaust double spring:
Outer spring outer diameter - 29.10mm
Outer spring inner diameter - 21.90mm
Inner spring outer diameter - 20.50mm
Inner spring inner diameter - 15.50mm
Set includes:
Intake springs - 12 pcs. SPR-A2095
Exhaust springs - 8 pcs. SPR-H1002D-AU
Titanium retainers: 12 pcs. intake RET-AU5VI-T2, 8 pcs. exhaust RET-AU5VE-T1
Seats - 8 pcs. exhaust SEAT-H1000
Product info:
Length: 1200mm
Width: 23mm
Number of tooth: 150
Gates' timing belts offer a precision fit with easy installation and no interference engine damage - exactly what you've come to expect from the worldwide leader in timing belts.
- Tensile cord reinforced with premium, high-strength glass cords
- Gripping teeth with aramid fiber technology and high saturation HNBR elastomeric composites for exceptional durability and heat resistance.
- Wear-resistant tooth jacket supported by reinforced nylon fabric and double-tooth stability.
The superior construction of Gates timing belts makes them 300 percent stronger than the standard aftermarket belt while providing up to three times the heat resistance.
Подробная спецификация продукта
Производитель: FCP Engineering
Модель: FCPRHA14450620-4
Profile: H-beam
С на С: 144mm
Диаметр отверстия нижней головки: 50.6mm
Диаметр пальца: 20mm
Количество: 4 pcs., 8 pcs. ARP2000 3/8" bolts
Сделано из: кованой стали 4340 EN24er
: 600HP (4 cylinder)
Mаксимальные обороты RPM: 9000RPM
Audi / VW / Seat / Skoda:
1.8T 20V (AEB, BAM, AWB and others)
1.8 2.0 16V (KR, PL, 9A)
Lifter data:
20 pcs. FCP Engineering mechanical racing solid lifters.
Forged steel, nitride hardened surface, HRC 50.
Installed tappet height to camshaft must be adjusted with lash caps (not included).
Lifter adjustment requires:
12pcs. 6mm lash caps
8pcs. 7mm lash caps
Intake lifter data (12 pcs.):
Outer diameter - 23.97mm
Inner diameter - 23.97mm
Outer height - 24.20mm
Stem length - 15.00mm
Stud diameter - 6.00mm
Weight - 26g
Exhaust lifter data (8 pcs.):
Outer diameter - 33.47mm
Inner diameter - 31.50mm
Outer height - 26.00mm
Stem length - 15.00mm
Stud diameter - 7.00mm
Weight - 43g
|
Product detailed specification |
|
|
Model number |
AEVI-1103 |
|
Head diameter |
29.90mm |
|
Stem diameter |
5.94mm |
|
Length |
103.90mm |
|
Material |
Inconel |
|
Fits for |
Audi / VW – 1.8 1.8T 2.4 2.7T 2.8 3.0 (5V per cylinder) |
|
Product detailed specification |
|
|
Model number |
AEVN-1103 |
|
Head diameter |
29.90mm |
|
Stem diameter |
5.94mm |
|
Length |
103.90mm |
|
Material |
Black nitrided stainless steel |
|
Fits for |
Audi / VW – 1.8 1.8T 2.4 2.7T 2.8 3.0 (5V per cylinder) |
Athena Racing 338 series multilayer steel (MLS) cylinder head gasket.
Athena MLS gaskets are designed to suit the requirements of today’s competition engines offering enhanced sealing compared to the OEM product. The gaskets are assembled from 2-5 layers of high quality stainless and spring steels.
Part number: 338254R
Gasket thickness: 1.25mm
Bore size: 83.80mm
|
Part number starting with 338 |
|
|
Athena advantages |
|
|
Optimized radius embossing shape |
The round shape of the embossing increases sealing on cylinder bore, oil and cooling water passages and improves spring back strength |
|
Advanced stopper technology |
State of the technology enhances sealing pressure around the cylinder. Highest sealing properties in high power engines |
|
Coating technology |
Designed & engineered by Athena the special coating applied on steel surfaces, improves temperature resistance & reliability of the head gasket |
|
Product detailed specification |
|
|
Bore size |
81.50mm |
|
Stroke |
86.40mm |
|
JE Pistons compression ratio (CR) |
8.5:1 |
|
OEM compression ratio (CR) |
9.5:1 |
|
Dome volume (CC) |
-8.7cm3 |
|
Compression height (CH) |
32.66mm |
|
Pin diameter |
20mm |
|
Features |
Accepts Turbo and Nitrous, Round piston skirt |
|
Fits for |
VAG - 1.8T 20V |
|
Product detailed specification |
|
|
Bore size |
81.00mm |
|
Stroke |
86.40mm |
|
JE Pistons compression ratio (CR) |
8.5:1 |
|
OEM compression ratio (CR) |
9.5:1 |
|
Dome volume (CC) |
-8.1cm3 |
|
Compression height (CH) |
32.66mm |
|
Pin diameter |
20mm |
|
Features |
Accepts Turbo and Nitrous, Round piston skirt |
|
Fits for |
VAG - 1.8T 20V |
|
Product detailed specification |
|
|
Bore size |
81.00mm |
|
Stroke |
86.40mm |
|
JE Pistons compression ratio (CR) |
9.25:1 |
|
OEM compression ratio (CR) |
9.5:1 |
|
Dome volume (CC) |
-2.7cm3 |
|
Compression height (CH) |
32.66mm |
|
Pin diameter |
20mm |
|
Features |
Accepts Turbo and Nitrous, round piston skirt |
|
Fits for |
VAG - 1.8T 20V |
Подробная спецификация продукта:
Производитель: FCP Engineering
Модель: FCPRXA14450620-4
Профиль:профиль H (Смазочный канал от большого конца до поршневого пальца)
С на С: 144mm
Диаметр отверстия нижней головки: 50.6mm
Диаметр пальца: 20mm
Количество 4 шт., 8 шт. ARP2000 3/8" болты
Сделано из:4340 EN24er cтали
Максимальная рекомендуемая мощность: 1000HP (4 cylinder)
Mаксимальные обороты RPM: 9000RPM
Audi / VW / Seat / Skoda:
1.8T 20V (AEB, BAM, AWB и другие)
1.8 2.0 16V (KR, PL, 9A)
ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.
Valve springs data
Installed seat pressure:
Intake valve spring - 25kg, exhaust double valve spring - 36kg
Load:
Intake - [email protected], exhaust - [email protected]
Max lift:
intake - up to 11mm, exhaust - up to 12.7mm
Made from chrome-silicon steel SAE9254-V
12 pcs. intake valve single springs
8 pcs. exhaust valve double springs
12 pcs. intake valve spring titanium retainers
8 pcs. exhaust valve spring titanium retainers
Fits all 4 cylinder 1.8-2.0 20V Turbo/NA Audi / Seat / Skoda / VW engines.
With this set the risk of valve flutter and a possible engine failure is minimized.
Recommended for engines with series and racing camshafts and over 7600 RPM.
Titanium retainers are very strong and light, they help to eliminate valve float. Weight is only 9 and 4 g.
