Valve springs data Installed seat pressure - 38kg Load - 100kg@12.5mm Max. lift - up to 13mm Made from chrome-silicone steel SAE9254-V Outer spring outer diameter: 30.50mm Outer spring inner diameter: 23.20mm Inner spring outer diameter: 21.20mm Inner spring inner diameter: 16.20mm 10 pcs. outer springs 10 pcs. inner springs With this set the risk of valve flutter and a possible engine failure is minimized. Recommended for engines with series and racing camshafts and over 7500 RPM.
Valve springs data Installed seat pressure: Intake valve spring - 25kg, exhaust double valve spring - 36kg Load: Intake - 56kg@10.5mm, exhaust - 84kg@10.5mm Max lift: intake - up to 11mm, exhaust - up to 12.7mm Made from chrome-silicon steel SAE9254-V 12 pcs. intake valve single springs 8 pcs. exhaust valve double springs Fits all 4 cylinder 1.8 20V, 2.0 20V Turbo/NA VAG Group engines. With this set the risk of valve flutter and a possible engine failure is minimized. Recommended for engines with series and racing camshafts and over 7500 RPM. Can be used together with standard or with FCP titanium retainers.
Valve springs data Installed seat pressure - 38kg Load - 100kg@12.5mm Max. lift - up to 13mm Made from chrome-silicon steel SAE9254-V Outer spring outer diameter: 30.50mm Outer spring inner diameter: 23.20mm Inner spring outer diameter: 21.20mm Inner spring inner diameter: 16.20mm 32 pcs. outer springs 32 pcs. inner springs Fits 8 cylinder 32V Audi engines PT, ABH. With this set the risk of valve flutter and a possible engine failure is minimized. Recommended for engines with series and racing camshafts and over 7500 RPM.
Valve springs data Installed seat pressure - 38kg Load - 100kg@12.5mm Max. lift - up to 13mm Made from chrome-silicon steel SAE9254-V Outer spring outer diameter: 30.50mm Outer spring inner diameter: 23.20mm Inner spring outer diameter: 21.20mm Inner spring inner diameter: 16.20mm 8 pcs. outer springs 8 pcs. inner springs Fits Audi / VW 1.9 TDi 8V (not PD/CR) engines. With this set the risk of valve flutter and a possible engine failure is minimized. Recommended for engines with series and racing camshafts and over 7500 RPM.
Данные клапанных пружин Установленное давление на сиденье - 38kg
Нагрукска - 100kg@12.5mm
Максимум.поднять - до 13mm
Изготовлен из хром-кремниевой стали SAE9254-V
20 шт.внешниx пружин
20 шт.внутренниx пружин
Подходит для всех 5-цилиндровых двигателей Audi 20V 3B, AAN, ABY, ADU, RR, 7A.
С этой настройкой риск трепетания клапана и возможного отказа двигателя сводится к минимуму.Рекомендуется для двигателей с серийными и гоночными распредвалами и более 7500 об / мин.
Может также использоваться вместе со стандартными или титановыми фиксаторами FCP.
Valve springs data Installed seat pressure - 38kg Load - 100kg@12.5mm Max. lift - up to 13mm Made from chrome-silicon steel SAE9254-V Outer spring outer diameter: 30.50mm Outer spring inner diameter: 23.20mm Inner spring outer diameter: 21.20mm Inner spring inner diameter: 16.20mm 10 pcs. outer springs 10 pcs. inner springs Fits 5 cylinder 10V Audi / VW 2.5TDi engines. With this set the risk of valve flutter and a possible engine failure is minimized. Recommended for engines with series and racing camshafts and over 7500 RPM.
Valve springs data Installed seat pressure: Intake valve spring - 25kg, exhaust double valve spring - 36kg Load: Intake - 56kg@10.5mm, exhaust - 84kg@10.5mm Max lift: intake - up to 11mm, exhaust - up to 12.7mm Made from chrome-silicon steel SAE9254-V 12 pcs. intake valve single springs 8 pcs. exhaust valve double springs 12 pcs. intake valve spring titanium retainers 8 pcs. exhaust valve spring titanium retainers Fits all 4 cylinder 1.8-2.0 20V Turbo/NA Audi / Seat / Skoda / VW engines. With this set the risk of valve flutter and a possible engine failure is minimized. Recommended for engines with series and racing camshafts and over 7600 RPM. Titanium retainers are very strong and light, they help to eliminate valve float. Weight is only 9 and 4 g.
Valve springs data Installed seat pressure - 38kg Load - 100kg@12.5mm Max. lift - up to 13mm Made from chrome-silicon steel SAE9254-V Outer spring outer diameter: 30.50mm Outer spring inner diameter: 23.20mm Inner spring outer diameter: 21.20mm Inner spring inner diameter: 16.20mm 12 pcs. outer springs 12 pcs. inner springs With this set the risk of valve flutter and a possible engine failure is minimized.
Load - 100kg@12.5mm Max. lift - up to 13mm Made from chrome silicone steel SAE9254-V Outer spring outer diameter: 30.50mm Outer spring inner diameter: 23.20mm Inner spring outer diameter: 21.20mm Inner spring inner diameter: 16.20mm 8 pcs. outer springs 8 pcs. inner springs Fits all 4 cylinder 1.8-2.0 8V VW / Audi engines With this set the risk of valve flutter and a possible engine failure is minimized. Recommended for engines with series and racing camshafts and over 7600 RPM. Can also be used together with standard or FCP titanium retainers.
Valve springs data Installed seat pressure: Intake valve spring - 25kg, exhaust double valve spring - 36kg Load: Intake - 56kg@10.5mm, exhaust - 84kg@10.5mm Max lift: intake - up to 11mm, exhaust - up to 12.7mm Made from chrome-silicon steel SAE9254-V 18 pcs. intake valve single springs 12 pcs. exhaust valve double springs Fits all V6 2.7 2.8 3.0 30V Turbo/NA Audi / VW engines. With this set the risk of valve flutter and a possible engine failure is minimized. Recommended for engines with series and racing camshafts and over 7600 RPM. Can be used together with standard or with FCP titanium retainers.
