Honda 2.2 H22A4 H22A1 Supertech Ventilfedernsatz SPRK-H1005D

Teilenummer SPRK-H1005D
Supertech Ventilfedernsatz
Honda - 4cyl 2.2 (H22A4, H22A1)

665,00 €

Verfügbarkeit:1 Artikel

Information

Spring data:
Seat pressure 80lbs@35.50mm
Open (lift) pressure 223lbs@12.5mm
Max lift. 14.80mm
Rate 11.50lbs/mm
Spring coil bind 20.70mm
Outer spring outer diameter: 29.65mm
Outer spring inner diameter: 21.85mm
Inner spring outer diameter: 20.50mm
Inner spring inner diameter: 15.50mm

Set includes:
Dual springs: 16 pcs. SPR-H1005D
Titanium retainers: 16 pcs. RET-K20A2/T2

Das könnte dir auch gefallen

Honda H22 A4 VTEC (M12) ARP Zylinderkopf Stehbolzenzatz 208-4304

ARP sind ein Hersteller von Verbindungselementen (Bolzen und Stehbolzen) im Motoren und Antriebsstränge, die von OEM-Ersatzteile zu Spezialhardware für den Rennsport gefunden. ARP ist weltweit führend in der Befestigungstechnik.

268,00 €

Honda F22 H22A H23A ACL Duraglide Hauptlager Satz 5M1937-STD

Component	1937
Halves	Identical Halves
Material code	F780
Min Std Shaft Size	1.9677 in / 49.98 mm
Max Std Shaft Size	1.9685 in / 50 mm
Min Std Tunnel Size	0.02 in / 0.54 mm
Max Std Tunnel Size	0.02 in / 0.54 mm
Max Overall Length	0.7874 in / 20 mm
Max Wall At Crown	0.0789 in / 2 mm

49,00 €

Cometic Honda H22A1/A2 2.2 DOHC MLS Zylinderkopf Dichtung 88x1.3mm C4198-051

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements

130,00 €

Honda 1.6 1.8 2.2 B16 B18 H22 Supertech Einlassventil Ventilführung GDE-HB55-I

10,00 €

Honda 1.6 1.8 2.2 B16 B18 H22 Supertech Auslassventil Ventilführung GDE-HB55-E

10,00 €