Es gibt keine Artikel im Warenkorb
| ENGINE BEARINGS | ||
 |
MAIN BEARING SET |
|
| Part# | ||
| 5M8309H |
5M8309HX |
|
| Sizes | STD, .025, .25, 0.5 | STD |
| Oil Clearance | Standard | + 0.001" Extra |
| Half Type | Identical Halves | |
| Material | Tri-Metal | |
| Min Std Shaft Size |
2.3616in / 59.984mm |
|
| Max Std Shaft Size |
2.3622in / 60mm |
|
| Min Std Tunnel Size |
2.5197in / 64mm |
|
| Max Std Tunnel Size |
2.5205in / 64.02mm |
|
| Max Wall at Crown |
0.0789in / 2.005mm |
0.0784in / 1.992mm |
| Max Overall Length |
0.748in / 19mm (8297H/HX) 0.5953in / 15.12mm (8298H/HX) 0.9035in / 22.95mm (8309H/HX - Flange) |
|
| Notes | Thrust in #5 pos. | |
|
Diagram |
|
|
Teilenummer 2T1644-STD
ACL Anlaufscheiben
Audi / VW - 1.6 1.8 2.0 (1983-2001)
|
Product detailed specification |
|
|
Model number |
BMEVI-1031S |
|
Head diameter |
31.50mm |
|
Stem diameter |
5.96mm |
|
Length |
105.65mm |
|
Material |
Inconel |
|
Fits for |
BMW - 1.8 2.5 2.8 3.0 (S42,M42,M50,S50,M52,S52,M54) |
|
Product detailed specification |
|
|
Model number |
BMIVN-1031S |
|
Head diameter |
34.00mm |
|
Stem diameter |
5.97mm |
|
Length |
106.10mm |
|
Material |
Black nitrided stainless steel |
|
Fits for |
BMW - 1.8 2.5 2.8 3.0 (S42,M42,M50,S50,M52,S52,M54) |
|
|||||||
| Quantity | 4 | ||||||
| Crankshaft | 48.001 / 47.981 | ||||||
| Housing | 51.003 / 51.024 | ||||||
| Max Wall | 1.496 | ||||||
| Max Length | 19.350 |
| 1,2,3,4,5 | |||||||
| Pairs & PN |
|
||||||
| Quantity | 5 | ||||||
| Crankshaft | 57.000 / 56.985 | ||||||
| Housing | 61.001 / 61.021 | ||||||
| Max Wall | 1.989 | ||||||
| Max Length | 20.599 |
|
|
|
|||||||||||||||||||
| Quantity | 1 | 2 | 2 | ||||||||||||||||||
| Crankshaft | 60.000 / 59.985 | 60.000 / 59.985 | 60.000 / 59.985 | ||||||||||||||||||
| Housing | 63.995 / 64.013 | 63.995 / 64.013 | 63.995 / 64.013 | ||||||||||||||||||
| Max Wall | 2.004 | 2.004 | 2.004 | ||||||||||||||||||
| Max Length | 22.050 | 18.951 | 15.100 |
Tassenstössel Daten:
30 Stk. FCP Engineering mechanische Tassenstößel.
Schmiedestahl, Nitrid gehärteter Oberfläche, HRC 50.
Installierte Tassenstoßelhöhe bis zu Nockenwelle muss mit Ventilkappen eingestellt werden (nicht enthalten).
Tassenstössel verstellung erfordert:
18stk. 6mm lash caps
12stk. 7mm lash caps
Einlass Tassenstössel Daten (18 Stk.):
Äußere Durchmesser - 23.97mm
Innere Durchmesser - 23.97mm
Äußere Höhe - 24.20mm
Stiellänge - 15.00mm
Stieldurchmesser - 6.00mm
Gewicht - 26g
Exhaust (12 Stk.):
Äußere Durchmesser - 33.47mm
Innere Durchmesser - 31.50mm
Äußere Höhe - 26.00mm
Stiellänge - 15.00mm
Stieldurchmesser - 7.00mm
Gewicht - 43g
