There are no items in cart
Length: 1144mm
Width: 25mm
Number of tooth: 143
Gates' timing belts offer a precision fit with easy installation and no interference engine damage - exactly what you've come to expect from the worldwide leader in timing belts.
- Tensile cord reinforced with premium, high-strength glass cords.
- Gripping teeth with aramid fiber technology and high saturation HNBR elastomeric composites for exceptional durability and heat resistance.
- Wear-resistant tooth jacket supported by reinforced nylon fabric and double-tooth stability.
The superior construction of Gates timing belts makes them 300 percent stronger than the standard aftermarket belt while providing up to three times the heat resistance.
Length: 1208mm
Width: 19mm
Number of tooth: 151
Gates' timing belts offer a precision fit with easy installation and no interference engine damage - exactly what you've come to expect from the worldwide leader in timing belts.
- Tensile cord reinforced with premium, high-strength glass cords.
- Gripping teeth with aramid fiber technology and high saturation HNBR elastomeric composites for exceptional durability and heat resistance.
- Wear-resistant tooth jacket supported by reinforced nylon fabric and double-tooth stability.
The superior construction of Gates timing belts makes them 300 percent stronger than the standard aftermarket belt while providing up to three times the heat resistance.
|
|||||||
| Quantity | 4 | ||||||
| Crankshaft | 49.004 / 48.984 | ||||||
| Housing | 51.999 / 52.014 | ||||||
| Max Wall | 1.486 | ||||||
| Max Length | 24.100 |
| ENGINE BEARINGS | ||
 |
CON ROD BEARING SET |
|
| Part# | ||
| 4B1236H |
4B1236HX |
|
| Sizes | STD, .025, .25 | STD |
| Oil Clearance | Standard | + 0.001" Extra |
| Half Type | Identical Halves | |
| Material |
Tri-metal Hardened steel backs |
|
| Min Std Shaft Size |
2.0454in / 51.954 mm |
|
| Max Std Shaft Size |
2.0461in / 51.972 mm |
|
| Min Std Tunnel Size |
2.1654 in / 55.000 mm |
|
| Max Std Tunnel Size |
2.1657 in / 55.010 mm |
|
| Max Wall at Crown |
0.0591in / 1.500 mm |
0.0585in / 1.487 mm |
| Max Overall Length |
0.669 in / 17.00 mm |
|
| Notes | - | |
|
Diagram |
 |
|
Set includes:
1 MLS cylinder head gasket (82mm x 1.65mm)
1 intake manifold gasket
1 exhaust manifold gasket
1 valve cover gasket
20 valve seals
and etc.
Victor Reinz part number - 02-29305-03
OE part number - 037 198 012 J
Set includes:
1 cylinder head gasket (83.50x1.65mm)
1 valve cover gasket
1 intake manifold gasket
4 exhaust manifold gaskets
1 exhaust manifold gasket
1 camshaft seal
16 valve seals
and etc.
|
Product detailed specification |
|
|
Bore size |
81.00mm |
|
Stroke |
86.40mm |
|
JE Pistons compression ratio (CR) |
8.5:1 |
|
OEM compression ratio (CR) |
9.5:1 |
|
Dome volume (CC) |
-8.1cm3 |
|
Compression height (CH) |
32.66mm |
|
Pin diameter |
20mm |
|
Features |
Accepts Turbo and Nitrous, Round piston skirt |
|
Fits for |
VAG - 1.8T 20V |
Part number 50009880.
Kolbenschmidt plain bearing measuring tape / plastic gauge kit (10 pcs.).
Measuring strips for the determination of bearing clearance for plain bearings
|
Product detailed specification |
|
|
Bore size |
79.50mm |
|
Stroke |
81.50mm |
|
FCP compression ratio (CR) |
8.7:1 |
|
OEM compression ratio (CR) |
8.8:1 |
|
Compression height (CH) |
28.10mm |
|
Pin diameter |
19mm |
|
Fits for |
1.6 16V Turbo (Z16LET, Z16LER) |
|
Product detailed specification |
|
|
Bore size |
86.00mm |
|
Stroke |
85.80mm |
|
JE Pistons compression ratio (CR) |
12.5:1 |
|
OEM compression ratio (CR) |
10.8:1 |
|
Dome volume (CC) |
-3.20cm3 |
|
Compression height (CH) |
31.62mm |
|
Pin diameter |
21mm |
|
Features |
Accepts Nitrous and E85, FSR series skirt |
|
Fits for |
BMW M3 E36 S50B30 |
Valve guide info:
Part number: FCPVGA/16
Material: Bronze
Length: 38mm
Inner diameter: 7mm
Outer diameter: 12.07mm
For intake and exhaust valves
| Sizes | STD, .025, .25, .50 |
| Oil Clearance | Standard |
| Half Type | Identical Halves |
| Material | F781 |
| Min. Std Shaft Size | 47.956 |
| Max. Std Shaft Size | 47.974 |
| Min. Std Tunnel Size | 51.000 |
| Max. Std Tunnel Size | 51.013 |
| Max Wall at Crown | 1,503 |
| Max Overall Length | 17,1 |
| Weight | 0.22 |
| Notes | 0 |
|
Product detailed specification |
|
|
Model number |
BMEVI-1065 |
|
Head diameter |
30.50mm |
|
Stem diameter |
4.95mm |
|
Length |
110.20mm |
|
Material |
Inconel |
|
Fits for |
BMW M3, M5 - 4.0 5.0 (S65B40A, S85B50A) |
Part number 6B5530H-STD
ACL Race series connecting rod bearings
Audi / VW - 2.8 2.9 3.2 3.6 VR6 R32 R36 (BUB, BHK, AES, AUE, ABV, AAA, AMY)
