Click here to open old website version
All categories
Parts by Car
Go
Parts by Car
Go
Parts by:
Category

Gaskets

Audi S2 RS2 S4 S6 2.2T 20V 3B ABY ABU AAN Ajusa crankcase gasket set 54059400

Set includes: 

1 crankcase gasket
1 crankshaft seal rear

1
crankshaft seal front
1
oil pump gasket
1
coolant pump gasket
etc.

€59.00
Opel 2.0 16V Z20LET/LEL/LER Victor Reinz cylinder head gasket set 02-34435-01

Set includes:
1 cylinder head gasket: OEM 56 07 867 (87.50x1.20mm)
2 camshaft seals: OEM 06 36 841
1
valve cover gasket set: OEM 607 648
16 valve seals: OEM
642 533

1 intake manifold gasket: OEM 850 655
1
exhaust manifold gasket: OEM 849 522
and etc.

€119.00
BMW M3 E46 3.2 S54B32 Ajusa cylinder head gasket set 52191700

Set includes:
1 cylinder head gasket (87.50x0.60mm)
1 valve cover gasket
6 intake manifold gaskets
6 exhaust manifold gaskets
24 valve seals
and etc.

Fits for:
BMW M3 E46 - 3.2 (S54B32)

€299.00
BMW 1.6 2.0 N20 N26 Athena Cooper Ring cylinder head gasket 85x1.2mm 330070R
Athena Racing 330 series Cooper Ring cylinder head gasket.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).
Part number: 330070R
Gasket thickness: 1.20mm
Bore size: 85.00mm

Part number starting with 330

Athena advantages

Reinforced material

Asbestos free composite raw material OE approved

Stainless steel ring (AISI304)

Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required

Silicon beading

Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages

€219.00
ATHENA RACING CYLINDER HEAD GASKET SET FOR BMW M5 F10 V8 N63 S63 330073R

Athena Racing 330 series Cooper Ring cylinder head gasket set.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).
Part number: 330073R
Gasket thickness: 1.10mm
Bore size: 90.50mm



Part number starting with 330

Athena advantages

Reinforced material

Asbestos free composite raw material OE approved

Stainless steel ring (AISI304)

Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required

Silicon beading

Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages

 
€429.00
Cometic SAAB 9-3, 9-5 2.0 2.3 99-09 MLS cylinder head gasket 91x1.3mm C4973-051
COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.
€155.00
Volvo B23 B230A B243F MLS cylinder head gasket 97x1.3mm C4499-051
COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.
€129.00
Cometic VAG 1.8 2.0 20V Turbo 1997-2006 MLS cylinder head gasket 82x1.3mm...
COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.
€130.00
Cometic VAG 1.8-2.0 8V-16V MLS cylinder head gasket 83x1.3mm C4247-051
COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.
€130.00
Cometic VAG 2.0 16V TFSI MLS cylinder head gasket 83.5x1.3mm C4541-051
COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.
€130.00
Cometic VW / AUDI VR6 3.2 24V 2004-09 MLS cylinder head gasket 85x1mm C4968-040
COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.
€155.00
Cometic BMW 3.0 N55 2010-17 MLX cylinder head gasket 85x1.1mm C15476-044
COMETIC MLX (Multi-Layer Stopper) gaskets utilize an integrated stopper layer for combustion chamber sealing and improved clamp load around the cylinder without increasing bore distortion. MLX technology can be found in some head gaskets and are made from the same materials as our MLS Head Gaskets. No sealants or re-torque required.
€249.00
1 2 3
18