New products

Toyota Supra 3.0 7M-GTE ARP main stud kit 2-bolt 203-5402

ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.

€232.00

Permatex Ultra Slick assembly lubricant for engine bearings 118ml (12 pcs.)

€120.00

Nissan GT-R 3.8 VR38DETT Athena Cooper ring cylinder head gasket set 96.5x1mm...

Athena Racing 330 series Cooper Ring cylinder head gasket set.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).
Part number: 330087R + 330088R
Gasket thickness: 1mm
Bore size: 96.50mm

Part number starting with 330
Athena advantages
Reinforced material	Asbestos free composite raw material OE approved
Stainless steel ring (AISI304)	Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required
Silicon beading	Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages

€345.00

Audi S4 RS4 3.0 V6 Biturbo Stroker FCP forged pistons kit 83mm CR 8.5

Part number: FCPPA830085RS4STR
Manufacturer: FCP Engineering
Forged high performance pistons for various applications in nearly all engine types for racing and street use.
Made of 4032-T6, piston skirt is molibden coated.
Each set of pistons also includes rings and HD series pins.
Bore size: 83.00mm
Compression ratio (CR): 8.5:1
Compression height: 27.50 mm
Pin diameter: 21mm
Stroke: 92.80mm
Audi S4 RS4 - 3.0 30V Stroker Biturbo

€999.00

Audi TTRS RS3 2.5 20V TFSI FCP X-beam steel connecting rods 144mm/23mm for...

Product detailed specification

Manufacturer: FCP Engineering
Model: FCPRXA14450623T-5
Profile: X-beam
C to C: 144mm
Big end diameter: 50.6mm
Pin diameter: 23mm (tapered)
Quantity: 5 pcs., 10 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating:1000HP (5 cylinder)
Advertised RPM rating: 9000RPM
Audi TT RS, RS3 - 2.5 20V TFSI (DAZA, DNWA)

€649.00

Opel / Vauxhall 2.0 C20XE C20LET FCP racing valve spring kit with retainers...

Valve springs data
Installed seat pressure - 30kg
Load - 100kg@13mm
Max. lift - up to 13mm
Made from chrome-silicone steel SAE9254-V
16 pcs. outer springs
16 pcs. inner springs
16 pcs. titanium retainers
16 pcs. seats
Fits Opel / Vauxhall 4 cylinder 2.0 16V C20XE C20LET engines.
With this set the risk of valve flutter and a possible engine failure is minimized.
Recommended for engines with series and racing camshafts and over 7600 RPM.
Titanium retainers are very light and strong, helps eliminate valve float. Weight is only 10g.

€499.00

Opel / Vauxhall 2.0 Z20LET Z20LEH FCP racing valve spring kit with retainers...

Valve springs data
Installed seat pressure - 30kg
Lift - 100kg@13mm
Max. lift - up to 13mm
Made from chrome-silicone steel SAE9254-V
16 pcs. outer springs
16 pcs. inner springs
16 pcs. titanium retainers
16 pcs. seats
Fits Opel / Vauxhall 4 cylinder 2.0 16V X20XE, Z20LET, Z20LEH engines.
With this set the risk of valve flutter and a possible engine failure is minimized.
Recommended for engines with series and racing camshafts and over 7600 RPM.
Titanium retainers are very light and strong, helps eliminate valve float. Weight is only 10g.

€499.00