Home

BMW 3.0 N55B30 S55B30 Supertech sodium filled exhaust valve BMEVI-1055S-HS STD

Product detailed specification
Model number	BMEVI-1055S-HS
Head diameter	28.00mm
Stem diameter	5.96mm
Length	112.9mm
Material	Sodium filled
Fits for	BMW E90, E91, E92, E93, E82, E88, E89, X6, Z4, F01 - 3.0 (N55B30, S55B30)

€63.00

Cometic BMW M10B18 M10B20 SOHC 8V 72-88 MLS cylinder head gasket 90x1.3mm...

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

€205.00

Permatex Ultra Slick assembly lubricant for engine bearings 118ml (12 pcs.)

€215.00

VAG 1.8T 20V bolt-on Performance camshaft set 245°/262° 8.25mm/9.95mm

€779.00

Peugeot / Citroen 1.6 TU5J4 Supertech intake valve PEIVN-28603 STD

Product detailed specification
Model number	PEIVN-28603
Head diameter	31.3mm
Stem diameter	5.96mm
Length	103.8mm
Material	Black nitrited
Fits for	Peugeot / Citroen - 1.6 (TU5J4)

€32.00

Walbro Motorsport BKS1001 Brushless Fuel Pump & Controller kit

IN-TANK BRUSHLESS DESIGN PACKED WITH POWER
TI Automotive BKS1001 Brushless Pump and Controller Kit
TI Automotive’s new in-tank brushless fuel pump utilizes advanced technology for maximum reliability
and efficiency. The result is a next-generation pump for any type of engine offering precise control of fuel
pressure, lower current draw, reduced heat and less noise. Supporting up to 1000+ HP, the BKS1000
provides more power, more torque and more speed. Matched controller with simple power and ground
operations for easy maintainability. The controller features sealed electronics for weather resistance.

€899.00

BMW M3 335i 535i S55B30 N55B30 JE Pistons forged pistons 84mm CR 10.2

Product detailed specification
Bore size	84.00mm
Stroke	89.60mm
JE Pistons compression ratio (CR)	10.2:1
OEM compression ratio (CR)	10.2:1
Dome volume (CC)	-10.4cm³
Compression height (CH)	32.40mm
Pin diameter	22mm
Features	Accepts Turbo and Nitrous; coated FSR skirt
Fits for	BMW - 3.0 24V Turbo (N55B30)

JE's patented Perfect Skirt coating makes piston slap, false knock, and cold-start wear a thing of the past.
For the first time ever, 2618-alloy pistons can be installed with piston-to-wall clearances near that of an OEM piston!

€1,899.00

Chevrolet V8 LS1 LS2 LS3 LS6 ACL Race Series connecting rod bearings...

€125.00

VW Golf 2.8 24V VR6 forged JE Pistons kit 82mm CR 10.2 279958

Product detailed specification
Bore size	82.00mm
Stroke	90.30mm
JE Pistons compression ratio (CR)	10.2:1
OEM compression ratio (CR)	10.75:1
Dome volume (CC)	-3.5cm³
Compression height (CH)	37.10mm
Pin diameter	20mm
Features	Accepts Turbo and Nitrous; Full round coated skirt
Fits for	VW Golf - 2.8 24V VR6 (AMV, AQP, AUE, AYL, BDE)

JE's patented Perfect Skirt coating makes piston slap, false knock, and cold-start wear a thing of the past.
For the first time ever, 2618-alloy pistons can be installed with piston-to-wall clearances near that of an OEM piston!

€1,349.00

Mercedes AMG 4.0 V8 Biturbo M176 M177 coated JE Pistons kit 83mm CR 10.5:1

Product detailed specification
Bore size	83.00mm
Stroke	92.00mm
JE Pistons compression ratio (CR)	10.5:1
OEM compression ratio (CR)	10.5:1
Dome volume (CC)	-2.6cm³
Compression height (CH)	32.1mm
Pin diameter	22mm
Features	Accepts Turbo and Nitrous
Fits for	MB 4.0 V8 Biturbo (M176)

€2,699.00

ARP2000 3/8x1.500" replacement bolt (1 pc.) for FCP connecting rods

ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.

€15.00

ARP2000 5/16x1.500" replacement bolt for FCP connecting rods (1 pc.)

ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.

€15.00

Honda 2.2 H22A4 H22A1 Supertech valve spring kit SPRK-H1005D

Spring data:
Seat pressure 80lbs@35.50mm
Open (lift) pressure 223lbs@12.5mm
Max lift. 14.80mm
Rate 11.50lbs/mm
Spring coil bind 20.70mm
Outer spring outer diameter: 29.65mm
Outer spring inner diameter: 21.85mm
Inner spring outer diameter: 20.50mm
Inner spring inner diameter: 15.50mm

Set includes:
Dual springs: 16 pcs. SPR-H1005D
Titanium retainers: 16 pcs. RET-K20A2/T2

€665.00

Audi / VW 2.0 16V TFSI Wossner piston kit 82.50mm CR 10.5 K9517DA

Product detailed specification
Bore size	82.50mm
Stroke	92.80mm
Wossner compression ratio (CR)	10.5:1
OEM compression ratio (CR)	10.5:1
Dome volume (CC)	-6.20cm³
Compression height (CH)	29.50mm
Pin diameter	20mm
Fits for	VAG 2.0 16V TFSI (EA113)

€899.00

Audi / VW 2.0 16V TSI EA888 Wossner piston kit CR 9.6 82.50mm K9494DA

Product detailed specification
Bore size	82.50mm
Stroke	92.80mm
Wossner compression ratio (CR)	9.6:1
OEM compression ratio (CR)	9.6:1
Dome volume (CC)	-8.90cm³
Compression height (CH)	29.60mm
Pin diameter	23mm
Fits for	Audi / VW - 2.0 16V TSI / TFSI (EA888 Chain driven)

€899.00

BMW M5 E60 S85B50 King Racing main bearings MB637XP-STD

Pairs & PN

XP	XP

M5803UPR	M5803LPR

XP	XP

MK5803UPR	MK5803LPR

Quantity

5

1

Crankshaft

59.969 / 59.982

Housing

0.000 / 65.034

Max Wall

2.497

Max Length

21.699

27.541

€279.00

Fiat 500 Abarth 1.4 16V Turbo FCP H-beam forged steel connecting rods 129mm

Product detailed specification

Manufacturer: FCP Engineering
Model: FCPRHF1294518
Profile: H-beam
C to C: 129.00mm
Big end diameter: 45.11mm
Pin diameter: 18mm
Quantity: 4 pcs., 8 pcs. ARP2000 5/16" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 600HP (4 cylinder)
Advertised RPM rating: 9000RPM
Fiat 500 Abarth / Grande punto - 1.4 16V Turbo

€439.00

BMW 1.6 1.8 M40 M42 M43, S42 USA FCP valve guide kit 6mm

€99.00

Subaru WRX 2.0 16V EJ20 Mahle piston kit CR 8.0 92.5mm 930020342

Product detailed specification
Bore size	92.50mm
Stroke	75.00mm
Mahle compression ratio (CR)	8.0:1
OEM compression ratio (CR)	8.0:1
Dome volume (CC)	-12cm³
Compression height (CH)	32.70mm
Pin diameter	23mm
Features	PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications
Fits for	Subaru Impreza WRX STI - 2.0 16V (EJ20, EJ205, EJ207)

€799.00

Subaru WRX STI 2.5 EJ257 Mahle pistons 99.50mm CR 8.5 930285017

Bore size	99.50mm
Stroke	79.00mm
Mahle compression ratio (CR)	8.5:1 - 56cc cylinder head 9.1:1 - 50cc cylinder head
OEM compression ratio (CR)	8.0:1
Dome volume (CC)	-19.25cm³
Compression height (CH)	30.70mm
Pin diameter	23mm
Features	4032 material
Fits for	Subaru WRX STI 2.5 (EJ257)

€799.00

Toyota Supra 3.0 2JZGTE Mahle Pistons CR 8.6 86.5mm 928989305

Bore size	86.50mm
Stroke	86.00mm
Mahle compression ratio (CR)	8.6:1
OEM compression ratio (CR)	8.5:1
Dome volume (CC)	-14.0cm³
Compression height (CH)	34.00mm
Pin diameter	22mm
Features	PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications
Fits for	Toyota Supra - 3.0 (2JZGTE)

€1,349.00

Toyota / BMW 3.0 B58B30 JE Pistons kit CR 10.5 82mm 371718

Product detailed specification
Bore size	82.00mm
Stroke	94.60mm
JE Pistons compression ratio (CR)	10.5:1
OEM compression ratio (CR)	11.0:1
Dome volume (CC)	-11.10cm³
Compression height (CH)	33.25mm
Pin diameter	22mm
Features	Accepts Turbo and Nitrous
Fits for	Toyota / BMW - 3.0 Turbo (B58B30)

€1,449.00

Honda RSX-S 2.0 K20A/Z MAHLE forged piston kit CR 12.9 86.5mm 929170905

Product detailed specification
Bore size	86.50mm
Stroke	86.00mm
MAHLE compression ratio (CR)	12.9:1
OEM compression ratio (CR)	11.7:1
Dome volume (CC)	12cm³
Compression height (CH)	30.00mm
Pin diameter	22mm
Features	4032 alloy
Fits for	Honda RSX-S - 2.0 (K20A/Z)

€799.00

Mitsubishi EVO 4-9 2.0 16V 4G63 Mahle piston kit 85.5mm CR 9 930130066

Product detailed specification
Bore size	85.50mm
Stroke	88.00mm
Mahle compression ratio (CR)	9.0:1
OEM compression ratio (CR)	8.3:1
Dome volume (CC)	-10cm³
Compression height (CH)	34.70mm
Pin diameter	22mm
Features	4032 alloy
Fits for	Mitsubishi EVO 8-9 - 2.0 16V (4G63)

€799.00