Home

Subaru WRX STI 2.5 EJ257 Mahle piston kit 99.75mm CR 8.5 930285027

Bore size	99.75mm
Stroke	79.00mm
Mahle compression ratio (CR)	8.5:1 - 56cc cylinder head 9.1:1 - 50cc cylinder head
OEM compression ratio (CR)	8.0:1
Dome volume (CC)	-19.25cm³
Compression height (CH)	30.70mm
Pin diameter	23mm
Features	4032 material
Fits for	Subaru WRX STI 2.5 (EJ257)

€799.00

Audi/VW 2.0 TFSI EA113 MAHLE piston kit CR 9.3 82.5mm 197799948

Bore size	82.50mm
Stroke	92.80mm
Mahle compression ratio (CR)	9.3:1
OEM compression ratio (CR)	10.5:1
Dome volume (CC)	-10.00cm³
Compression height (CH)	29.60mm
Pin diameter	20mm
Features	PowerPak Plus M142 Alloy Hard Anodized Top Ring Groove For Extreme Duty Applications
Fits for	Audi / VW - 2.0 TFSI EA113 (AXX, BGB, BPJ, BPY, BWA

€899.00

Bottom adapter for EV14 injectors

€12.00

Saab B204 / B205 / B234 / B235 ACL main bearings 5M2015H

€175.00

Toyota / BMW 3.0 B58B30 JE Pistons kit CR 10.5 83mm 371720

Product detailed specification
Bore size	83.00mm
Stroke	94.60mm
JE Pistons compression ratio (CR)	10.5:1
OEM compression ratio (CR)	11.0:1
Dome volume (CC)	-11.10cm³
Compression height (CH)	33.25mm
Pin diameter	22mm
Features	Accepts Turbo and Nitrous
Fits for	Toyota / BMW - 3.0 Turbo (B58B30)

€1,449.00

Opel / Vauxhall 2.0 C20XE C20LET FCP racing valve spring kit with retainers

Valve springs data
Installed seat pressure - 30kg
Load - 100kg@13mm
Max. lift - up to 13mm
Made from chrome-silicone steel SAE9254-V
16 pcs. outer springs
16 pcs. inner springs
16 pcs. titanium retainers
Fits Opel / Vauxhall 4 cylinder 2.0 16V C20XE C20LET engines.
With this set the risk of valve flutter and a possible engine failure is minimized.
Recommended for engines with series and racing camshafts and over 7600 RPM.
Titanium retainers are very light and strong, helps eliminate valve float. Weight is only 10g.

€399.00

BMW 135i 335i 3.0 N54B30 FCP H-beam steel connecting rods 145mm for oem pistons

Product detailed specification
Manufacturer: FCP Engineering
Model: FCPRHB14553622T
Profile: H-beam
C to C: 145mm
Big end diameter: 53.6mm
Pin diameter: 22mm (Tapered small end)
Quantity: 6 pcs., 12 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 1000HP (6 cylinder)
Advertised RPM rating: 9000RPM
BMW E90, E91, E92, E93, E82, E88, E89, X6, Z4, F01 (N54B30)
Fits OEM pistons

€639.00

Honda Integra Type R B18C FCP H-beam steel connecting rods 138mm

Manufacturer: FCP Engineering
Model: FCPRHH1384821
Profile: H-beam
C to C: 138mm
Big end diameter: 48mm
Pin diameter: 21mm
Quantity: 4 pcs., 8 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 600HP (4 cylinder)
Advertised RPM rating: 9000RPM
Honda Integra Type R - 1.8 16V (B18C)

€439.00

Cometic BMW 2.5 2.8 3.0 M54 MLS cylinder head gasket 85x1.3mm C4352-051

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

€239.00

Nissan RB30 / RB30ET / VG30DETT ACL Race connecting rod bearings 6B2390H-STD

€85.00

Honda 1.8 16V B18A MLS cylinder head gasket 84x0.85mm 338094R

Athena Racing 338 series multilayer steel (MLS) cylinder head gasket.
Athena MLS gaskets are designed to suit the requirements of today’s competition engines offering enhanced sealing compared to the OEM product.
The gaskets are assembled from 2-5 layers of high quality stainless and spring steels.
Part number: 338094R
Gasket thickness: 0.85mm
Bore size: 84.00mm

Part number starting with 338
Athena advantages
Optimized radius embossing shape	The round shape of the embossing increases sealing on cylinder bore, oil and cooling water passages and improves spring back strength
Advanced stopper technology	State of the technology enhances sealing pressure around the cylinder. Highest sealing properties in high power engines
Coating technology	Designed & engineered by Athena the special coating applied on steel surfaces, improves temperature resistance & reliability of the head gasket

€130.00

HONDA 1.8 B18C1 DOHC VTEC Mahle forged piston kit CR 12.4 81.50mm 929114709

Product detailed specification
Bore size	81.50mm
Stroke	87.20mm
MAHLE compression ratio (CR)	12.4:1
OEM compression ratio (CR)	10.0:1
Dome volume (CC)	9.1cm³
Compression height (CH)	30.00mm
Pin diameter	21mm
Features	4032 alloy
Fits for	Honda - 1.8 16V (B18C1)

€799.00

Toyota Celica / MR2 2.0 16V 3S-GTE FCP H-beam forged steel connecting rods 138mm

Manufacturer: FCP Engineering
Model: FCPRHT1385122
Profile: H-beam
C to C: 138mm
Pin diameter: 22mm
Quantity: 4 pcs., 8 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 600HP (4 cylinder)
Advertised RPM rating: 9000RPM
Toyota Celica / MR2 - 2.0 16V (3SGTE)

€439.00

Honda B / D / F / K / H series Supertech exhaust valve seal VS-H5.5E

€2.00

Nissan Supertech 6mm exhaust valve stem seal VS-N6E

€2.00

Mini Cooper S (MKI / R53) 1.6 W11B16 FCP H-beam connecting rods 131.60mm

Product detailed specification

Manufacturer: FCP Engineering
Model: FCPRHMI13164921
Profile: H-beam
C to C: 131.60mm
Big end diameter: 49mm
Pin diameter: 21mm
Quantity: 4 pcs., 8 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 600HP (4 cylinder)
Advertised RPM rating: 9000RPM

€439.00

VAG 1.8T 20V 92.8mm Stroker Supertech pistons CR 9 83mm P4-VW18T83-N15ST-H13

Product detailed specification
Bore size	83.00mm
Stroke	92.80mm
Supertech compression ratio (CR)	9.0:1
OEM compression ratio (CR)	9.5:1
Dome volume (CC)	-15cm³
Compression height (CH)	29.50mm
Pin diameter	20mm
Features	Accepts Turbo and Nitrous, Round piston skirt
Fits for	VAG - 1.8T 20V

€899.00

Ford Cosworth 2.0 16V (N5B) 2.0 16V Ferrea exhaust valve STD F6746

The 6000 Series Competition Valves are designed to provide excellent reliability in an environment of high spring pressures and roller cams, at a budget price. They have higher fatigue resistance and tensile strengths than our competitor’s best offerings.

To manufacture the valves we use our exclusive two-step slow forging process using EV8 stainless steel on both intake and exhaust valves.We provide a special heat-treatment and stress relieving process, along with hard chrome stems and friction-welded hard tips. We finish with a swirl polished head. The valves feature flow improvements to deliver the power needed for today’s sophisticated racing engines.

€29.00

Audi / VW 1.8T 20V / 2.7T 30V Ferrea Exhaust valve STD F1554P

The Super Alloy Engine valves represent the highest level of sophistication in valve technology. These valves are designed to handle the extreme heat requirements and punishment of today’s Nitro Fuels, Supercharged, Turbocharged, Nitrous Oxide, and Marine race motors.

€57.00

Toyota 3.0 24V 2JZGE / 2JZGTE Ferrea intake valve STD F1498P

Ferrea Competition Plus Valves have built a reputation as the industry's most reliable extreme duty valve. To manufacture the valves we use special aerospace quality alloys, including the EV8-Z18, which provides high tensile strength. An exclusive two-step slow forging process ensures proper grain flow and virtually eliminates any damage to thematerial structure. The valves are then heat-treated and stress-relieved over a 48-hour period, which is the crucial base of our molecular integrity. These valves feature avionics-quality hard chrome along with a specially applied hard tip.

€41.00

BMW M3 3.2 S54B32 Ferrea intake valve STD F2361P

Ferrea Competition Plus Valves have built a reputation as the industry's most reliable extreme duty valve. To manufacture the valves we use special aerospace quality alloys, including the EV8-Z18, which provides high tensile strength. An exclusive two-step slow forging process ensures proper grain flow and virtually eliminates any damage to thematerial structure. The valves are then heat-treated and stress-relieved over a 48-hour period, which is the crucial base of our molecular integrity. These valves feature avionics-quality hard chrome along with a specially applied hard tip.

€41.00

Audi 200 / UR Quattro 2.2 10V Turbo Wossner piston kit 80mm CR 7.0:1 K1560DA

Product detailed specification
Bore size	80.00mm
Stroke	86.40mm
Wossner compression ratio (CR)	7.00:1
OEM compression ratio (CR)	7.00:1
Dome volume (CC)	NA
Compression height (CH)	40.60mm
Pin diameter	22mm
Fits for	Audi 2.1 /2.2 20V Turbo (WR / KG / JY)

€1,099.00

Renault Clio RS 2.0 16V F4R Supertech Inconel exhaust valve REVI-28338F-3 +1mm

Product detailed specification
Model number	REVI-28338F-3
Head diameter	30.00mm
Stem diameter	5.44mm
Length	108.9mm
Material	Inconel
Fits for	Renault 2.0 16V (F4R)

€37.00

Honda H22A Vtec Supertech intake valve HIVN-1006F STD

Product detailed specification
Model number	HIVN-1006F
Head diameter	35.00mm
Stem diameter	5.48mm
Length	106.85mm
Material	Black nitrited stainless steel
Fits for	Honda H22A / H22A4

€24.00