Home

VW / Audi 3.2 24V VR6 R32 JE Pistons CR 11.5 84.5mm 279950

Product detailed specification
Bore size	84.50mm
Stroke	95.90mm
JE Pistons compression ratio (CR)	11.5:1
OEM compression ratio (CR)	10.9:1/11.3:1
Dome volume (CC)	-7.40cm³
Compression height (CH)	34.50mm
Pin diameter	20mm
Features	Accepts Turbo and Nitrous; Full round skirt
Fits for	VW / Audi 3.2 24V R32

JE's patented Perfect Skirt coating makes piston slap, false knock, and cold-start wear a thing of the past.
For the first time ever, 2618-alloy pistons can be installed with piston-to-wall clearances near that of an OEM piston!

€1,349.00

Mazda Miata, MX5 1.6 (B6) 1.8 (BP) ARP cylinder head stud kit 218-4701

ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.

€223.00

Subaru WRX 2.5 EJ25 EJ257 Athena Cooper Ring cylinder head gasket set...

Athena Racing 330 series Cooper Ring cylinder head gasket set.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).
Part number: 330078R (2 pcs.)
Gasket thickness: 1.20mm
Bore size: 101.30mm

Part number starting with 330
Athena advantages
Reinforced material	Asbestos free composite raw material OE approved
Stainless steel ring (AISI304)	Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required
Silicon beading	Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages

€279.00

Bosch EV1 - EV6 Interconnector (1 pc.)

€12.00

Bluetooth Adapter for ECUMaster EMU

€49.00

Honda 2.0 2.4 K20 K24 Supertech Inconel exhaust valve Inconel HEVI-1021D +0.5mm

Product detailed specification
Model number	HEVI-1021D
Head diameter	30.50mm
Stem diameter	5.45mm
Length	108.65mm
Material	Inconel
Fits for	Honda K20 K24

€38.00

81mm piston ring set for one cylinder

€45.00

Audi 4.2 40V V8 Supertech valve spring set SPRK-AUDI4.2T

Spring data:
Seat pressure: intake - 56lbs @ 36.60mm, exhaust - 75lbs @ 33.70mm
Spring coil bind: intake - 23.00mm, exhaust - 19.50mm
Max lift: intake - 13.60mm, exhaust - 14.20mm
Rate: intake - 6.70lbs/mm, exhaust - 10.00lbs/mm
Intake single spring:
Outer diameter - 20.60mm
Inner diameter - 14.40mm
Exhaust double spring:
Outer spring outer diameter - 29.10mm
Outer spring inner diameter - 21.90mm
Inner spring outer diameter - 20.50mm
Inner spring inner diameter - 15.50mm

Set includes:
Intake springs - 24 pcs. SPR-A2095
Exhaust springs - 16 pcs. SPR-H1002D-AU
Titanium retainers: 24 pcs. intake RET-AU5VI-T2, 16 pcs. exhaust RET-AU5VE-T4
Seats - 16 pcs. exhaust SEAT-H1000

€1,249.00

Subaru EJ20 EJ205 EJ207 stroker kit with crankshaft

Kit includes:

1. Genuine Subaru 79.00mm stroke crankshaft
2. FCP Engineering H-beam connecting rod kit
3. JE Pistons kit (Bore size 92.50mm or 93.00mm CR 8.5:1)
4. King Racing connecting rod bearing set
5. King Racing main bearing set

€2,199.00

Ecumaster CAN Keyboard 12 pos

Key features

CAN bus compatible keyboard,
125kbps, 250kbps, 500kbps CAN bus speed supported,
works with EMU BLACK (1 keyboard) and PMU devices (up to 2 keyboards),
full customization possible,
IP 67 rated

€349.00

Ecumaster pressure sensor 0-7 Bar

€99.00

Audi / VW 2.0 TSI EA888 FCP X-beam connecting rods 144mm/21mm for aftermarket...

Product detailed specification

Manufacturer: FCP Engineering
Model: FCPRXATSI14450621
Profile: X-beam (oiling channel from big end to piston pin)
C to C: 144mm
Big end diameter: 50.6mm
Pin diameter: 21mm
Quantity: 4 pcs., 8 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 1000HP+ (4 cylinder)
Advertised RPM rating: 9000RPM
Audi / VW - 2.0 16V TSI (EA888)

€549.00

Ford 2.0 2.3 Duratec Athena MLS cylinder head gasket 91x1mm 338472R

Athena Racing 338 series multilayer steel (MLS) cylinder head gasket.
Athena MLS gaskets are designed to suit the requirements of today’s competition engines offering enhanced sealing compared to the OEM product. The gaskets are assembled from 2-5 layers of high quality stainless and spring steels.
Part number 338472R
Gasket thickness: 1.00mm
Bore size: 91.00mm

Part number starting with 338
Athena advantages
Optimized radius embossing shape	The round shape of the embossing increases sealing on cylinder bore, oil and cooling water passages and improves spring back strength
Advanced stopper technology	State of the technology enhances sealing pressure around the cylinder. Highest sealing properties in high power engines
Coating technology	Designed & engineered by Athena the special coating applied on steel surfaces, improves temperature resistance & reliability of the head gasket

€129.00

Nissan 200SX S14 SR20DET Supertech intake valve NIVN-1005 STD

Product detailed specification
Model number	NIVN-1005
Head diameter	34.15mm
Stem diameter	5.97mm
Length	101.40mm
Material	Black nitrided stainless steel
Fits for	Nissan 200SX - 2.0 16V (SR20DE, SR20DET)

€25.00

BMW / Toyota B38 / B48 / B58 Supertech exhaust valve TEVI-1058-HS /...

Product detailed specification
Model number	TEVI-1058-HS/MCEVI-1400S-HS
Head diameter	30.10mm
Stem diameter	5.95mm
Length	100.10mm
Material	Sodium filled Inconel/Nimonic alloy
Fits for	BMW / Toyota - Supercharged B38 / B48 / B58

€69.00

Depo Racing digital 52mm oil temperature gauge PK-WA5247B

€59.00

Cometic Nissan Gen 3 VQ35HR 3.5 / VQ37VHR 3.7 DOHC V6 MLS cylinder head...

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

€265.00

Cometic VAG 2.0 TSI EA888 '12+ MLS cylinder head gasket 84x1.3mm C4979-051

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

€130.00

Cometic BMW M3 E36 S50B30/B32 '92-00 USA MLS cylinder head gasket 87x2.49mm...

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

€349.00

Cometic Ford 2.0 ZETEC MLS cylinder head gasket 87x2mm C4279-080

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

€179.00

Cometic Honda 2.0 K20A2 K20A3 K20Z1 2.4 K24A1 MLS cylinder head gasket 88x1mm...

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements

€130.00

Audi TTRS, RS3 2.5 20V TFSI Ultra Series JE Pistons kit CR 9.5 82.5mm 367846

Product detailed specification
Bore size	82.50mm
Stroke	92.80mm
JE Pistons compression ratio (CR)	9.5:1
OEM compression ratio (CR)	10.0:1
Dome volume (CC)	-7.5cm³
Compression height (CH)	29.60mm
Pin diameter	22mm
Features	Accepts Turbo and Nitrous; Ultra series
Fits for	Audi TTRS, RS3 - 2.5 20V TFSI

€1,349.00

Subaru BRZ FA20 / Toyota 4U-GSE ACL connecting rod bearings 4B8310H-0.25

Sizes	STD, .025, .25
Oil Clearance
Half Type
Material	F781
Min. Std Shaft Size	49.976
Max. Std Shaft Size	50.000
Min. Std Tunnel Size	53.000
Max. Std Tunnel Size	53.024
Max Wall at Crown	1,504
Max Overall Length	15,6
Weight	0.133
Notes

€79.00

Honda 1.6 1.7 1.8 2.0 2.2 2.3 ACL Race main bearings 5M1957H-0.25

Sizes	STD, .025, .25
Oil Clearance	Standard
Half Type	Identical Halves
Material	Tri-Metal
Min. Std Shaft Size	2.1646in / 54.980mm
Max. Std Shaft Size	2.1654in / 55.000mm
Min. Std Tunnel Size	2.3228in / 59.000mm
Max. Std Tunnel Size	2.3236in / 59.020mm
Max Wall at Crown	0.0790in / 2.007mm
Max Overall Length	0.7874in / 20.00mm
Weight	0.28
Notes	0

€92.00