Home

Boostline Conrod Set Audi S2 2.2 20V 144mm 20mm CA625+ VW5670-787+

Purpose-Built For Boost High Boost and Nitrous Audi S2 / RS2 Applications with 20mm Pin
Forged From Ultra-Strong 4340 Steel
Patented Three-Pocket Design
Capable of 1000+ HP
3/8 x 1.600 in. ARP 625+ Custom Aged Fasteners
High Quality APMCO Bronze Pin Bushing
26 Point Detailed CMM Inspection Report Included

€1,999.00

Audi / VW 2.0 16V / 2.5 20V TSI TFSI Ferrea exhaust valve STD F2177P

The Super Alloy Engine valves represent the highest level of sophistication in valve technology. These valves are designed to handle the extreme heat requirements and punishment of today’s Nitro Fuels, Supercharged, Turbocharged, Nitrous Oxide, and Marine race motors.

€57.00

BMW 135i 335i N54B30 Ultra series JE Piston Schmiedekolben 84.5mm CR 9.5 367878

Product detailed specification
Bore size	84.50mm
Stroke	89.60mm
JE Pistons compression ratio (CR)	9.5:1
OEM compression ratio (CR)	10.2:1
Dome volume (CC)	-22cm³
Compression height (CH)	31.60mm
Pin diameter	22mm
Features	Accepts Turbo and Nitrous; Ultra series
Fits for	BMW - 3.0 24V Turbo (N54B30)

€1,649.00

Boostline conrod set BMW N54B30 145mm BM5708-866

Purpose-Built For Boost High Boost and BMW N54B30 Applications
Forged From Ultra-Strong 4340 Steel
Patented Three-Pocket Design
Capable of 1500 HP
3/8 x 1.600 in. ARP 2000 Fasteners
High Quality APMCO Bronze Pin Bushing
26 Point Detailed CMM Inspection Report Included

€1,799.00

Cometic BMW 3.0 S58B30T0 (2020+) MLX cylinder head gasket 85x1.4mm C15696-055

COMETIC MLX (Multi-Layer Stopper) gaskets utilize an integrated stopper layer for combustion chamber sealing and improved clamp load around the cylinder without increasing bore distortion. MLX technology can be found in some head gaskets and are made from the same materials as our MLS Head Gaskets. No sealants or re-torque required.

€309.00

Volvo B230F B234F ACL Duraglide main bearings 5M2727-STD

€89.00

Toyota 1.6 16V 4AGE Supertech valve spring kit SPRK-TC25D

Spring data:
Outer spring outer diameter: 25.00mm
Outer spring inner diameter: 18.00mm
Inner spring outer diameter: 18.00mm
Inner spring inner diameter: 13.00mm
Seat pressure: 73Lbs@35.40mm (seat), 202Lbs@10.5mm (open/lift)
Spring coil bind: 21.00mm/17.00mm
Max lift: 14.40mm
Rate: 12.60Lbs/mm

Set includes:

16 double valve springs (SPR-TC25D)
16 titanium retainers (RET-2500/T1)

16 valve seats (SS-3012)
16 valve seals (VS-T6SM)

€599.00

Turbosmart FPR6 Fuel Pressure Regulator -6AN (Blue) TS-0404-1021

The Turbosmart FPR6 Series provides market-leading fuel control and response via true 1:1 ratio and superior flow and bypass capacity for vehicles with -6 / 6AN fuel systems. Utilising our Stainless Steel Valve Seat & Milspec Diaphragm the FPR6 Series is suitable for all Fuel types including Race Fuel and aggressive leaded fuels. Our FPR6 Range includes 6AN inlet and outlet and return fittings and is Available in Standard (35psi to 80psi) as well as LP (3psi to 20psi) for Low Pressure and Carburettor Systems to suit 1200HP systems.

Features
Stainless Steel Valve Seat
Suitable for all fuel types
1:1 Class Leading Ratio & Response
Adjustable Pressure
1/8 NPT Pressure Sensor Port
Unique Locking Collar Design
Milspec Diaphragm
Detailed Specific Fuel Flow Data & Spec

€289.00

BMW N62/N63/S63B44 (-2011) King Racing connecting rod bearings CR8049GPC-0.25

€209.00

BMW M3 E90 S65B40 ACL Race main bearings 5M1581H-STD

€229.00

BMW M3 S65 4.0 32V V8 Supertech retainer set RET-BMS65-BE1 for valve springs

€599.00

Wiseco Tapered Piston Ring Compressor Sleeve 83mm RCS08300

€59.00

BMW / Toyota Supra B58B30 / B58C30 FCP X-beam steel connecting rods 148mm

Product detailed specification

Manufacturer: FCP Engineering
Model: FCPRXB14853622
Profile: X-beam
C to C: 148mm
Big end diameter: 53.6mm
Pin diameter: 22mm
Quantity: 6 pcs., 12 pcs. ARP2000 5/16" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 1200HP (6 cylinder)
Advertised RPM rating: 9000RPM
BMW 340i / Z4 - 3.0 24V Turbo (B58B30)

Toyota Supra - 3.0 24V Turbo (B58C30)

€999.00

Cometic Nissan RB25DET Top End Gasket Kit PRO2016T

€369.00

Ford / Volvo 2.5L 5-cyl. ACL Race connecting rod bearing kit 5B7880HX

€99.00

BMW M1 PROCAR M88 Athena Cooper Ring cylinder head gasket 95x1.3mm330061R

Athena Racing 330 series Cooper Ring cylinder head gasket set.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).

Part number starting with 330
Athena advantages
Reinforced material	Asbestos free composite raw material OE approved
Stainless steel ring (AISI304)	Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required
Silicon beading	Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages

€325.00

Toyota 3.0 2JZGTE/2JZGE/2JZA80 FCP H-beam steel connecting rods 142mm

Manufacturer: FCP Engineering
Made of: forged steel 4340 EN24er
Model: FCPRHT1425522
Profile: H-beam
C to C: 142mm
Big end diameter: 55mm
Pin diameter: 22mm
Quantity: 6 pcs., 12 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 1200HP (6 cylinder)
Advertised RPM rating: 9000RPM
Toyota Supra - 3.0 (2JZGTE, 2JZGE, 2JZA80)

€639.00

BMW M3 E30 2.3 S14 ARP head stud kit 201-4605

ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.

€248.00

Renault 2.0 F4R ARP cylinder head stud kit 216-4301

ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.

€301.00

Ford Focus RS 2.0 Zetec ARP cylinder head stud kit 251-4702

ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.

€223.00

BMW M3 E36 3.0 3.2 S50B30 S50B32 EURO ARP cylinder head stud kit 201-S50B30/B32

ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.

€353.00

Audi / VW 1.8 2.0 16V-20V ACL Race main bearings 5M1644H-0.25

ENGINE BEARINGS
	MAIN BEARING SET
	Part#
	5M1644H	5M1644HX
Sizes	STD, .25, .50	STD
Oil Clearance	Standard	+ 0.001" Extra
Half Type	Upper & Lower
Material	Tri-metal
Min Std Shaft Size	2.1243in / 53.958mm
Max Std Shaft Size	2.1251in / 53.978mm
Min Std Tunnel Size	2.3228in / 59.000mm
Max Std Tunnel Size	2.3236in / 59.019mm
Max Wall at Crown	0.0985in / 2.502mm	0.0980in / 2.489mm
Max Overall Length	0.728in / 18.49mm
Notes	Set contain 6 x 1648H and 4 x 1644H shells. Use 1648H shell in #4 position as upper and lower.
Diagram (Top View)

Engines VAG group 4 cylinder engines 1.6 1.8 2.0 16-20V (KR, PL, AEB, etc.)

€79.00

Renault 1.6 1.7 1.8 1.9 2.0 F4R F7R ACL Race main bearings 5M7807H-STD

ENGINE BEARINGS
	MAIN BEARING SET
	Part#
	5M7807H	5M7807HX
Sizes	STD, .25, .50	STD
Oil Clearance	Standard	+ 0.001" Extra
Half Type	Identical Halves
Material	Tri-Metal
Min Std Shaft Size	2.1569 in / 54.785 mm
Max Std Shaft Size	2.1573 in / 54.795 mm
Min Std Tunnel Size	2.3122 in / 58.731 mm
Max Std Tunnel Size	2.3128 in / 58.744 mm
Max Wall at Crown	0.0765 in / 1.945 mm	0.0760 in / 1.933 mm
Max Overall Length	0.728 in / 18.50 mm
Notes
Diagram (Top View)

Engines Renault 4 cylinder 1.6 1.7 1.8 1.9 2.0
(F1N, F2N, F2R, F3N, F3P, F3R, F4R, F7P, F7R; F8M, F8Q - diesel)

€109.00

Toyota 2.5 3.0 2JZGTE ACL Race connecting rod bearings 6B8100HX-STD

ENGINE BEARINGS
	CON ROD BEARING SET
	Part#
	6B8100H	6B8100HX
Sizes	STD, .025, .25	STD
Oil Clearance	Standard	+ 0.001" Extra
Half Type	Identical halves
Material	Tri-metal Hardened steel backs
Min Std Shaft Size	2.0465in / 51.981mm
Max Std Shaft Size	2.0472in / 52mm
Min Std Tunnel Size	2.1663in / 55.024mm
Max Std Tunnel Size	2.167in / 55.042mm
Max Wall at Crown	0.0593in / 1.506mm	0.0588in / 1.493mm
Max Overall Length	0.7598in / 19.3mm
Notes
Diagram (Top View)

Engines Toyota - 2.5 3.0 (1JZGE, 1JZGTE, 2JZGE, 2JZGTE)

€109.00