There are no items in cart
|
Product detailed specification |
|
|
Model number |
AIVN-1103S |
|
Head diameter |
26.90mm |
|
Stem diameter |
5.96mm |
|
Length |
105.90mm |
|
Material |
Black nitrided stainless steel |
|
Fits for |
Audi / VW – 1.8 1.8T 2.4 2.7T 2.8 3.0 (5V per cylinder) |
|
|||||||
| Quantity | 6 | ||||||
| Crankshaft | 51.999 / 51.981 | ||||||
| Housing | 55.024 / 55.042 | ||||||
| Max Wall | 1.506 | ||||||
| Max Length | 19.200 |
|
Part number starting with 330 |
|
|
Athena advantages |
|
|
Reinforced material |
Asbestos free composite raw material OE approved |
|
Stainless steel ring (AISI304) |
Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required |
|
Silicon beading |
Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages |
|
Product detailed specification |
|
|
Model number |
MEVN-1008 |
|
Head diameter |
31.00mm |
|
Stem diameter |
6.54mm |
|
Length |
109.60mm |
|
Material |
Black nitrited stainless steel |
|
Fits for |
Mitsubishi EVO 4-9 - 2.0 16V (4G63) |
|
Product detailed specification |
|
|
Model number |
BMIVN-1045S |
|
Head diameter |
36.00mm |
|
Stem diameter |
5.97mm |
|
Length |
117.50mm |
|
Material |
Black nitrited stainless steel |
|
Fits for |
BMW M3 E46 - 3.2 (S54B32) |
|
Product detailed specification |
|
|
Bore size |
82.00mm |
|
Stroke |
86.40mm |
|
Wossner compression ratio (CR) |
8.5:1 |
|
OEM compression ratio (CR) |
9.3:1 |
|
Dome volume (CC) |
-9.60cm3 |
|
Compression height (CH) |
30.70mm |
|
Pin diameter |
21mm |
|
Fits for |
Audi S4, RS4, A6 - 2.7T 30V (AGB, ASJ, AZB, AZR, AZF) |
Athena Racing 338 series multilayer steel (MLS) cylinder head gasket.
Athena MLS gaskets are designed to suit the requirements of today’s competition engines offering enhanced sealing compared to the OEM product. The gaskets are assembled from 2-5 layers of high quality stainless and spring steels.
Part number 338060R
Gasket thickness: 1.15mm
Bore size: 87.50mm
|
Part number starting with 338 |
|
|
Athena advantages |
|
|
Optimized radius embossing shape |
The round shape of the embossing increases sealing on cylinder bore, oil and cooling water passages and improves spring back strength |
|
Advanced stopper technology |
State of the technology enhances sealing pressure around the cylinder. Highest sealing properties in high power engines |
|
Coating technology |
Designed & engineered by Athena the special coating applied on steel surfaces, improves temperature resistance & reliability of the head gasket |
Athena Racing 338 series multilayer steel (MLS) cylinder head gasket.
Athena MLS gaskets are designed to suit the requirements of today’s competition engines offering enhanced sealing compared to the OEM product. The gaskets are assembled from 2-5 layers of high quality stainless and spring steels.
Part number: 338315R
Gasket thickness: 1.50mm
Bore size: 87.50mm
|
Part number starting with 338 |
|
|
Athena advantages |
|
|
Optimized radius embossing shape |
The round shape of the embossing increases sealing on cylinder bore, oil and cooling water passages and improves spring back strength |
|
Advanced stopper technology |
State of the technology enhances sealing pressure around the cylinder. Highest sealing properties in high power engines |
|
Coating technology |
Designed & engineered by Athena the special coating applied on steel surfaces, improves temperature resistance & reliability of the head gasket |
✪ Compressor side Technical features:
✪ Turbine side Technical features:
|
Product detailed specification |
|
|
Model number |
BMIVN-1040S |
|
Head diameter |
35.00mm |
|
Stem diameter |
5.97mm |
|
Length |
117.50mm |
|
Material |
Black nitrited stainless steel |
|
Fits for |
BMW M3 E46 - 3.2 (S54B32) |
|
|
|||||||||||||
| Quantity | 4 | 1 | ||||||||||||
| Crankshaft | 53.000 / 52.989 | 53.000 / 52.989 | ||||||||||||
| Housing | 56.718 / 56.736 | 56.718 / 56.736 | ||||||||||||
| Max Wall | 1.842 | 1.842 | ||||||||||||
| Max Length | 20.701 | 24.201 |
Set includes:
1 crankshaft seal front
1 crankshaft seal rear
1 oil filter housing gasket
1 oil pump gasket
1 universal sealing compound
and etc.
Fits for:
VAG group belt driven engines (Audi, Seat, Skoda, VW) - 2.0 16V TFSI EA113 (AXX, BGB, BHZ, BPG, BPJ, BPY, BUL, BWA, BWE, BWT, BYK, BYD, BZC, CDLA, CDLB, CDLC, CDLF, CDMA)
| ENGINE BEARINGS | ||
 |
MAIN BEARING SET |
|
| Part# | ||
| 5M7807H |
5M7807HX |
|
| Sizes | STD, .25, .50 | STD |
| Oil Clearance | Standard | + 0.001" Extra |
| Half Type | Identical Halves | |
| Material | Tri-Metal | |
| Min Std Shaft Size |
2.1569 in / 54.785 mm |
|
| Max Std Shaft Size | 2.1573 in / 54.795 mm | |
| Min Std Tunnel Size | 2.3122 in / 58.731 mm | |
| Max Std Tunnel Size | 2.3128 in / 58.744 mm | |
| Max Wall at Crown | 0.0765 in / 1.945 mm |
0.0760 in / 1.933 mm |
| Max Overall Length | 0.728 in / 18.50 mm | |
| Notes | ||
|
Diagram |
 |
|
| Position | 1,2,3,4,5,6 | ||||||
|---|---|---|---|---|---|---|---|
| Pairs & PN |
|
||||||
| Quantity | 6 | ||||||
| Crankshaft | 57.978 / 57.958 | ||||||
| Housing | 63.000 / 63.017 | ||||||
| Max Wall | 2.499 | ||||||
| Max Length | 18.471 |
| ENGINE BEARINGS | ||
|
MAIN BEARING SET |
|
| Part# | ||
| 5M1186H |
5M1186HX |
|
| Sizes | STD,.025, .25 | STD |
| Oil Clearance | Standard | + 0.001" Extra |
| Half Type | Upper & Lower | |
| Material | Tri-Metal | |
| Min Std Shaft Size |
2.2435in / 56.985mm |
|
| Max Std Shaft Size |
2.2441in / 57mm |
|
| Min Std Tunnel Size |
2.4016in / 61mm |
|
| Max Std Tunnel Size |
2.4024in / 61.021mm |
|
| Max Wall at Crown |
0.0783in / 1.99mm |
0.0778in / 1.977mm |
| Max Overall Length |
0.8268in / 21mm (1186H/HX) 1in / 25.4mm (1187H/HX - Flange) |
|
| Notes | ||
|
Diagram |
1186H & HX - Positions 1, 2, 4, 5
1187H & HX - Position 3
|
|
Athena Racing 338 series multilayer steel (MLS) cylinder head gasket.
Athena MLS gaskets are designed to suit the requirements of today’s competition engines offering enhanced sealing compared to the OEM product. The gaskets are assembled from 2-5 layers of high quality stainless and spring steels.
Part number: 338253R
Gasket thickness: 1.35mm
Bore size: 83mm
|
Part number starting with 338 |
|
|
Athena advantages |
|
|
Optimized radius embossing shape |
The round shape of the embossing increases sealing on cylinder bore, oil and cooling water passages and improves spring back strength |
|
Advanced stopper technology |
State of the technology enhances sealing pressure around the cylinder. Highest sealing properties in high power engines |
|
Coating technology |
Designed & engineered by Athena the special coating applied on steel surfaces, improves temperature resistance & reliability of the head gasket |
|
Product detailed specification |
|
|
Bore size |
83.00mm |
|
Stroke |
92.80mm |
|
JE Pistons compression ratio (CR) |
8.5:1 |
|
OEM compression ratio (CR) |
9.3:1 |
|
Dome volume (CC) |
-21.1cm3 |
|
Compression height (CH) |
30.80mm |
|
Pin diameter |
22mm |
|
Features |
Accepts Turbo and Nitrous; Round, |
|
Fits for |
Audi S4, RS4, A6 - 2.7 -> 3.0 30V |
