There are no items in cart
| Oil Clearance | Standard | + 0.001" Extra |
| Half Type | Upper & Lower | |
| Material |
Tri-metal Hardened steel backs |
|
| Min Std Shaft Size |
1.9280in / 48.971mm |
|
| Max Std Shaft Size | 1.9286 in / 48.987mm | |
| Min Std Tunnel Size |
2.0472in / 52.000mm |
|
| Max Std Tunnel Size |
2.0477in / 52.012mm |
|
| Max Wall at Crown |
0.0591in / 1.500mm |
0.0596in / 1.513mm |
| Max Overall Length |
0.760in / 19.30mm |
|
| Notes | Upper rod bearing has two oil holes to cover early and late engines. | |
|
Diagram |
 |
|
| Position | 1,2,3,4,5,6 | ||||||
|---|---|---|---|---|---|---|---|
| Pairs & PN |
|
||||||
| Quantity | 6 | ||||||
| Crankshaft | 57.978 / 57.958 | ||||||
| Housing | 63.000 / 63.017 | ||||||
| Max Wall | 2.499 | ||||||
| Max Length | 18.471 |
Fittings In (mm):- 11
Fittings Out (mm):- 8
Pump:- GSS352G3
Voltage DC:- 12
Flow Ltr/Hr (Max):-420
Flow Ltr/Hr @ 3 Bar (44psi):- 315
Flow Ltr/Hr @ 5 Bar (73psi):- 235
Max Pressure:- 7.6
Length (mm):- 120
Diameter (mm):- 39.2
Weight (Kg):- 0.366
| Component | M5673-PR |
| Min Crankshaft Diameter | 2.164 inch / 54.98mm |
| Max Crankshaft Diameter | 2.165inch / 55.00mm |
| Min Housing Diameter | 2.362 inch / 60.00 mm |
| Max Housing Diameter | 2.363 inch / 60.02 mm |
| Bearing Length | 0.787 inch / 19.99 mm |
| Max Wall Thickness | 0.000 inch / 0.00 mm |
| 3 | 1,2,4,5 | |||||||||||||
| Pairs & PN |
|
|
||||||||||||
| Quantity | 1 | 4 | ||||||||||||
| Crankshaft | 57.000 / 56.985 | 57.000 / 56.985 | ||||||||||||
| Housing | 61.001 / 61.021 | 61.001 / 61.021 | ||||||||||||
| Max Wall | 1.989 | 1.989 | ||||||||||||
| Max Length | 25.499 | 20.899 |
|
|||||||
| Quantity | 6 | ||||||
| Crankshaft | 51.976 / 51.956 | ||||||
| Housing | 55.001 / 55.014 | ||||||
| Max Wall | 1.501 | ||||||
| Max Length | 17.000 |
|
Product detailed specification |
|
|
Model number |
TEVI-1014 |
|
Head diameter |
29.00mm |
|
Stem diameter |
5.97mm |
|
Length |
99.10mm |
|
Material |
Inconel |
|
Fits for |
Toyota Supra - 3.0 (2JZGE, 2JZGTE) |
Product detailed specification
Manufacturer: FCP Engineering
Clutch disc, torsion damped, with special ceramic clutch friction material.
Diameter: 240mm
Number of teeth: 23
Hub profile: 21.9x24.3-23N
Transmittable torque: 720Nm
Manufacturer compare numbers:
Audi
050 141 117 E
074 141 117 G
074 141 117 H
077 141 117 L
078 141 117
These high performance clutch plates from Sachs are a direct replacement for an OEM clutch plate and have a much more aggressive friction surface which allows them to handle up to 40% more torque. This makes them ideal for competition cars where a more aggressive clutch actuation is acceptable. For these clutch plates to operate at their maximum torque capacity they should be used with a Sachs high performance clutch cover.
|
Product detailed specification |
|
|
Bore size |
82.00mm |
|
Stroke |
86.40mm |
|
JE Pistons compression ratio (CR) |
9.25:1 |
|
OEM compression ratio (CR) |
9.5:1 |
|
Dome volume (CC) |
-6.5cm3 |
|
Compression height (CH) |
32.66mm |
|
Pin diameter |
20mm |
|
Features |
Accepts Turbo and Nitrous; FSR coated piston skirt |
|
Fits for |
VAG 1.8T 20V |
| ENGINE BEARINGS | ||
 |
MAIN BEARING SET |
|
| Part# | ||
| 5M1913H |
5M1913HX |
|
| Sizes | STD, 025, .25 | STD |
| Oil Clearance | Standard | + 0.001" Extra |
| Half Type | Identical Halves | |
| Material | Tri-Metal | |
| Min Std Shaft Size |
2.1644in / 54.976mm |
|
| Max Std Shaft Size |
2.1654in / 55mm |
|
| Min Std Tunnel Size |
2.3622in / 60mm |
|
| Max Std Tunnel Size |
2.363in / 60.02mm |
|
| Max Wall at Crown |
0.0986in / 2.504mm |
0.0981in /2.491mm |
| Max Overall Length |
0.7874in / 20mm |
|
| Notes | ||
|
Diagram |
 |
|
