Home

Audi / VW 2.0 16V TSI EA888 JE Pistons FSR Ultra Series CR 9.6 83mm 367861

Product detailed specification
Bore size	83.00mm
Stroke	92.80mm
JE Pistons compression ratio (CR)	9.6:1
OEM compression ratio (CR)	9.6:1
Dome volume (CC)	-6.4cm³
Compression height (CH)	29.30mm
Pin diameter	21mm
Features	Accepts Turbo and Nitrous; Ultra series
Fits for	Audi / VW 2.0 16V TSI chain driven engines EA888 (CAWA, CAWB, CCTA, CCZB, CAEA)

€1,069.00

Audi TT RS 2.5 20V TFSI DAZA ARP cylinder head stud kit 204-4708

ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.

€425.00

Ecumaster PMU 16 Autosport power management unit

€1,999.00

Audi / VW 2.0 TFSI EA113 FCP X-beam steel connecting rods 144mm/21mm for...

Product detailed specification

Manufacturer: FCP Engineering
Model: FCPRXATFSI14450621
Profile: X-beam (oiling channel from big end to piston pin)
C to C: 144mm
Big end diameter: 50.6mm
Pin diameter: 21mm
Quantity: 4 pcs., 8 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 800HP+ (4 cylinder)
Advertised RPM rating: 9000RPM
Audi / VW - 2.0 16V TFSI (EA113)

€549.00

Toyota 2.5 3.0 2JZGTE ACL Race main bearings 7M8103H-0.25

Sizes	STD, .025, .25
Oil Clearance	Standard
Half Type	Upper & Lower
Material	Tri-Metal
Min. Std Shaft Size	2.4403in / 61.984mm
Max. Std Shaft Size	2.441in / 62.001mm
Min. Std Tunnel Size	2.5992in / 66.02mm
Max. Std Tunnel Size	2.5998in / 66.035mm
Max Wall at Crown	0.0789in / 2.004mm
Max Overall Length	0.7874in / 20mm (8103H/HX) 0.9055in / 23mm (8104H/HX)
Weight	0.44
Notes	0

€199.00

Nissan Skyline RB25DET / RB26DETT ACL Race connecting rod bearings 6B2960H-0.25

Sizes	STD, .025, .25, .50
Oil Clearance	Standard
Half Type	Identical Halves
Material	F781
Min. Std Shaft Size	47.956
Max. Std Shaft Size	47.974
Min. Std Tunnel Size	51.000
Max. Std Tunnel Size	51.013
Max Wall at Crown	1,503
Max Overall Length	17,1
Weight	0.22
Notes	0

€99.00

FCP gift card 100 eur

€100.00

Audi TTRS / RS3 2.5 20V TFSI Victor Reinz head gasket kit 02-42820-01

€245.00

Turbosmart Blow-Off Valve for VAG 2.0 TSI engines TS-0203-1063

Unlike the standard valve's plastic construction, they are machined from aircraft grade aluminium, and bolt straight up to the factory location, offering all the technology from Turbosmart's race-bred BOV range in an OEM-replacement package.

The Dual Port offers a 50/50 split between recirculating and vent-to-atmosphere, for quiet operation at low boost, and the high performance sound associated with vent-to-atmosphere BOVs at higher boost. The Dual Port also recirculates enough air to keep the car's ECU happy.

Turbosmart's Kompact Shortie does not leak, bleed boost pressure or struggle with increased boost on tuned vehicles. It also completely eliminates compressor surge, allowing the turbo to operate to its full potential, and for longer.

€299.00

Audi S4 RS4 2.7 V6 Biturbo FCP forged pistons 82mm CR 8.5 and connecting rods

Pistons data:
Part number: FCPPA820085RS4/20mm
Manufacturer: FCP Engineering
Forged high performance pistons for various applications in nearly all engine types for racing and street use.
Made of 4032-T6, piston skirt is molibden coated.
Each set of pistons also includes rings and HD series pins.
Bore size: 82.00mm
Compression ratio (CR): 8.5:1
Compression height: 30.80 mm
Pin diameter: 20mm
Stroke: 86.40mm

Connecting rod data:
Model: FCPRHA15456820
Profile: H-beam
C to C: 154mm
Big end diameter: 56.80mm
Pin diameter: 20mm
Quantity: 6 pcs., 12 pcs. ARP2000 5/16" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 600-800HP (6 cylinder)
Advertised RPM rating: 9000RPM

€1,899.00

Nissan 3.5 VQ35DE ACL Race Series main bearings 4M2633H-0.25

€99.00

BMW M3 E46 3.2 S54B32 King Racing connecting rod bearings CR6877XP-STD

Position

1,2,3,4,5,6

Pairs & PN

SX	SX

C6877-PRC	C6877-PRC

Quantity

6

Crankshaft

48.974 / 48.992

Housing

53.000 / 53.015

Max Wall

1.991

Max Length

15.900

€159.00

Bosch injector EV14 1500cc 8.5 Ohm short O-O 34mm 0280158333

€155.00

Audi / VW R32 R36 24V Ferrea exhaust valve STD (short) F2289P

The Super Alloy Engine valves represent the highest level of sophistication in valve technology. These valves are designed to handle the extreme heat requirements and punishment of today’s Nitro Fuels, Supercharged, Turbocharged, Nitrous Oxide, and Marine race motors.

€57.00

Kelford A90 Supra MK5 / BMW B58 Valve Springs & Retainers KVS58-BT

€849.00

ACL oil pump Mitsubishi Evo 4-9 OPMB1176

Meets or Exceeds OEM pump flow
Individually inspected and tested to assure pressure and flow specifications
Twelve-month, 12,000 mile warranty
TSI6949 and ISO certification
Die cast ADC-12 aluminum housing for added strength and reduced weight
Steel copper alloy gerotor sets for dependable service and reliability
Tight tolerances for optimum pressure and flow performance

€449.00

Kelford BMW Gen1 B58 | Valve Springs & Retainers KVS57-BT

€849.00

Audi / VW 2.0 TSI GEN3 EA888 Athena Cooper Ring cylinder head gasket...

Athena Racing 330 series Cooper Ring cylinder head gasket.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).

Part number starting with 330
Athena advantages
Reinforced material	Asbestos free composite raw material OE approved
Stainless steel ring (AISI304)	Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required
Silicon beading	Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages

€235.00

Renault 1.6 1.7 1.8 1.9 2.0 F4R F7R ACL Race main bearings 5M7807HX-STD

ENGINE BEARINGS
	MAIN BEARING SET
	Part#
	5M7807H	5M7807HX
Sizes	STD, .25, .50	STD
Oil Clearance	Standard	+ 0.001" Extra
Half Type	Identical Halves
Material	Tri-Metal
Min Std Shaft Size	2.1569 in / 54.785 mm
Max Std Shaft Size	2.1573 in / 54.795 mm
Min Std Tunnel Size	2.3122 in / 58.731 mm
Max Std Tunnel Size	2.3128 in / 58.744 mm
Max Wall at Crown	0.0765 in / 1.945 mm	0.0760 in / 1.933 mm
Max Overall Length	0.728 in / 18.50 mm
Notes
Diagram (Top View)

Engines Renault 4 cylinder 1.6 1.7 1.8 1.9 2.0
(F1N, F2N, F2R, F3N, F3P, F3R, F4R, F7P, F7R; F8M, F8Q - diesel)

€109.00

BMW M5 E34 S38B36 ACL Race Series connecting rod bearings 6B1568H-STD

€199.00

Subaru BRZ 2.0 FA20 / Toyota GT86 2.0 4U-GSE Athena MLX cylinder head gasket...

€299.00

BMW M50 M52 UPGRADED REINFORCED OIL PUMP SHAFT - TURBO

€219.00

Ecumaster battery isolator AS-SR Radlok Rev.2

•Weight: 83g
•Dimensions: 50mm x 100mm x 38.5mm
•Voltage range: 6V – 19V, 28V transient
(12V automotive installations only)
•Operating temperature range: -40C + 125C
•Current capability: 300A continuous, peak up to 1000A
•Current measurement resolution 4A
•Current measurement range: -1000A to 1000A
•Current measurement accuracy: ±10%
•Inductive load switching capability: 600mJ
•Enclosure: Anodized aluminium, IP67 rated
• High current terminals: M8 nickel plated terminals
or Radlok connectors
•Signal connector: Deutsch ASX202-06PN
(mating plug ASX602-06SN included)
•Power save state current consumption: <1mA
•ON state current consumption: ~20mA
•Engine kill output: 3A, High (VBat), Low (GND) or Hi-Z

€549.00

BMW 2.5 2.7 M20 Athena Cooper Ring cylinder head gasket 86.5x2mm 330244R

Athena Racing 330 series Cooper Ring cylinder head gasket.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).

Part number starting with 330
Athena advantages
Reinforced material	Asbestos free composite raw material OE approved
Stainless steel ring (AISI304)	Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required
Silicon beading	Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages

€325.00