There are no items in cart
Spring data:
Outer spring outer diameter: 27.50mm
Outer spring inner diameter: 20.00mm
Inner spring outer diameter: 20.00mm
Inner spring inner diameter: 15.20mm
Seat pressure: 88Lbs@34.20mm (seat)
Spring coil bind: 20.70mm
Max lift: 14.00mm
Rate: 12.10Lbs/mm
Set includes:
Dual springs: 24 pcs. SPR-TS1015-GTR
Titanium retainers: 12 pcs. RET-TS5.5-T8 (intake) & 12 pcs. RET-TS5.5-T9F (exhaust)
Seats: 12 pcs. SEAT-TS-GTR2 (intake) & 12 pcs. SEAT-TS-GTR (exhaust)
| Sizes | STD, .025, .25 |
| Oil Clearance | Standard |
| Half Type | Identical halves |
| Material | Tri-metal Hardened steel backs |
| Min. Std Shaft Size | 2.0465in / 51.981mm |
| Max. Std Shaft Size | 2.0472in / 52mm |
| Min. Std Tunnel Size | 2.1663in / 55.024mm |
| Max. Std Tunnel Size | 2.167in / 55.042mm |
| Max Wall at Crown | 0.0593in / 1.506mm |
| Max Overall Length | 0.7598in / 19.3mm |
| Weight | 0.253 |
| Notes | 0 |
Walbro part number: GSS342 (includes full install kit)
Type: universal electric in-tank fuel pump
Fuel: gasoline
Flow rate: 255LPH
Noise level: very quiet
Minimum voltage: 12V
Fuel pump dimensions:
Length: 120mm (overall)
Length: 80mm (case only)
Diameter: 39.5mm
Inlet width: 11mm
Outlet width: 8mm
Operating pressure: 15-90 PSI - final fuel pressure set by regulator
Pushing a whopping 255 liters of fuel per hour at high pressure
High pressure, high performance universal in-tank fuel pump for the extreme automotive enthusiast
All Walbro fuel pumps are brand new and 100% authentic Walbro. Made in the USA
Design based on TI Automotive OEM Chevrolet Corvette and Dodge Viper technology
Valve guide info:
Part number: FCPVGA/20
Material: Bronze
Length: 38mm
Inner diameter: 7mm
Outer diameter: 12.07mm
For intake and exhaust valves
Clutch disc, torsion damped, with special ceramic clutch friction material.
Diameter: 240mm
Number of teeth: 23
Hub profile: 21.8x24.2-23N
Transmittable torque: 720Nm
Manufacturer compare numbers:
Audi
03L 141 031 P
06A 141 031 Q
VW
03L 141 031 P
06A 141 031 Q
06A 141 031 QX
074 141 032 D
These high performance clutch plates from Sachs are a direct replacement for an OEM clutch plate and have a much more aggressive friction surface which allows them to handle up to 40% more torque. This makes them ideal for competition cars where a more aggressive clutch actuation is acceptable. For these clutch plates to operate at their maximum torque capacity they should be used with a Sachs high performance clutch cover.
|
Product detailed specification |
|
|
Model number |
BMEVI-1054S-HS |
|
Head diameter |
28.00mm |
|
Stem diameter |
5.95mm |
|
Length |
114.90mm |
|
Material |
Sodium filled |
|
Fits for |
BMW E60, E90, E91, E92, E93, E82, E88, E89, X6, Z4, F01 (N54B30) |
