There are no items in cart
Manufacturer: FCP Engineering
Made of: forged steel 4340 EN24er
Model: FCPRHT1425522
Profile: H-beam
C to C: 142mm
Big end diameter: 55mm
Pin diameter: 22mm
Quantity: 6 pcs., 12 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 1200HP (6 cylinder)
Advertised RPM rating: 9000RPM
Toyota Supra - 3.0 (2JZGTE, 2JZGE, 2JZA80)
| NGINE BEARINGS | ||
 |
CON ROD BEARING SET |
|
| Part# | ||
| 4B2322H |
4B2322HX |
|
| Sizes | STD, .025, .25, .50 | STD |
| Oil Clearance | Standard | + 0.001" Extra |
| Half Type | Upper & Lower | |
| Material |
Tri-metal Hardened steel backs |
|
| Min Std Shaft Size |
1.9280in / 48.971mm |
|
| Max Std Shaft Size | 1.9286 in / 48.987mm | |
| Min Std Tunnel Size |
2.0472in / 52.000mm |
|
| Max Std Tunnel Size |
2.0477in / 52.012mm |
|
| Max Wall at Crown |
0.0591in / 1.500mm |
0.0596in / 1.513mm |
| Max Overall Length |
0.760in / 19.30mm |
|
| Notes | Upper rod bearing has two oil holes to cover early and late engines. | |
|
Diagram |
 |
|
Engines Opel 4 cylinder 1.8 2.0 2.2 2.4
|
Product detailed specification |
|
|
Bore size |
80.50mm |
|
Stroke |
86.40mm |
|
Wossner compression ratio (CR) |
7.00:1 |
|
OEM compression ratio (CR) |
7.00:1 |
|
Dome volume (CC) |
-33.4 |
|
Compression height (CH) |
40.60mm |
|
Pin diameter |
22mm |
|
Fits for |
Audi 2.1 /2.2 20V Turbo |
|
Part number starting with 330 |
|
|
Athena advantages |
|
|
Reinforced material |
Asbestos free composite raw material OE approved |
|
Stainless steel ring (AISI304) |
Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required |
|
Silicon beading |
Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages |
ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.
|
Product detailed specification |
|
|
Model number |
MAIVN-2301D |
|
Head diameter |
35.00mm |
|
Stem diameter |
5.48mm |
|
Length |
103.40mm |
|
Material |
Black nitrited |
|
Fits for |
Ford / Mazda (2.0) 2.3 Duratec |
| Sizes | STD, .025, .25, .50 |
| Oil Clearance | Standard |
| Half Type | Upper & Lower |
| Material | Tri-Metal |
| Min. Std Shaft Size | 2.6373in / 66.987mm |
| Max. Std Shaft Size | 2.6378in / 67.000mm |
| Min. Std Tunnel Size | 2.8346in / 71.999mm |
| Max. Std Tunnel Size | 2.8352in / 72.014mm |
| Max Wall at Crown | 0.0981in / 2.491mm |
| Max Overall Length | 0.8858in / 22.5mm (8088H/HX) 0.7677in / 19.5mm (8089H/HX) |
| Weight | 0.45 |
| Notes | This part has no notch. |
