Home

BMW M5 E60 5.0 V10 S85B50 FCP H-beam steel connecting rods 140.7mm

Product detailed specification

Manufacturer: FCP Engineering
Model: FCPRHB1407S85
Profile: H-beam
C to C: 140.7mm
Big end diameter: 56mm
Pin diameter: 21mm
Quantity: 10 pcs., 20 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 1500HP+ (10 cylinder)
Advertised RPM rating: 9000RPM
BMW M5 E60 - 5.0 V10 (S85B50)

€1,209.00

VAG 1.8T 20V 95.5mm Stroker Supertech pistons CR 8.7 82.5mm P4-VW18T825-N17ST2

Product detailed specification
Bore size	82.50mm
Stroke	95.50mm
Supertech compression ratio (CR)	8.7:1
OEM compression ratio (CR)	9.5:1
Dome volume (CC)	-17cm³
Compression height (CH)	28.15mm
Pin diameter	20mm
Features	Accepts Turbo and Nitrous, Round piston skirt
Fits for	VAG - 1.8T 20V

€899.00

VW / Audi 1.8 20V, 2.0 16V, 2.2T 20V, 1.9 2.5 TDI ARP M10 main bolt

8740 Chrome Moly: Until the development of today’s modern alloys, chrome moly was popularly considered a high strength material. Now viewed as only moderate strength, 8740 chrome moly is seen as a good tough steel, with adequate fatigue properties for most racing applications, but only if the threads are rolled after heat-treatment, as is the standard ARP production practice. Typically, chrome moly is classified as a quench and temper steel, that can be heat-treated to deliver tensile strengths between 180,000 and 210,000 psi

€11.00

TOYOTA Supra 2.8 5M-GE, 3.0 7M-GTE ARP cylinder head stud kit 203-4701

ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.

€241.00

Renault 1.8-2.0 16V F7P F7R FCP mechanical racing solid lifter kit 33mm

Outer diameter - 32.97mm
Inner diameter - 31.00mm
Outer height - 26.50mm
Stem length - 13.90mm
Stud diameter - 7.00mm
16 pcs. FCP Engineering racing mechanical solid lifters
Forged steel, nitride hardened surface, HRC 50
Installed follower height to camshaft must be adjusted with lash caps (not included)

€320.00

BMW 3.0 N55B30 S55B30 Supertech black nitrided intake valve BMIVN-1055S STD

Product detailed specification
Model number	BMIVN-1055S
Head diameter	32.00mm
Stem diameter	4.97mm
Length	104.9mm
Material	Black nitrided stainless steel
Fits for	BMW E60, E90, E91, E92, E93, E82, E88, E89, X6, Z4, F01 - 3.0 (N55B30, S55B30)

€33.00

Cometic Turbo Flange T25 gasket C4515

€15.00

AUDI R8, Lamborghini Gallardo 5.2 40V V10 JE Pistons kit 84.50mm CR 10.5 361281

Product detailed specification
Bore size	84.50mm
Stroke	92.8mm
JE Pistons compression ratio (CR)	10.5:1
Dome volume (CC)	-3.7cm³
Compression height (CH)	27.6mm
Pin diameter	20mm
Features	Skirt coating; HD pins
Fits for	Audi R8 - 5.2 V10

€2,449.00

Chevrolet V8 LS1 LS2 LS3 LS6 ACL Race Series connecting rod bearings 8B663H-STD

€125.00

Honda 1.6 D16Y ARP cylinder head stud kit 208-4305

ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.

€212.00

Porsche Cayenne (9PA) 4.8 32V (M48.51) JE Pistons 97mm CR 10.5

Product detailed specification
Bore size	97.00mm
Stroke	83.00mm
JE Pistons compression ratio (CR)	10.5:1
Dome volume (CC)	-5.5cm³
Compression height (CH)	29.87mm
Pin diameter	23mm
Features	Accepts Turbo and Nitrous; HD pins
Fits for	Porsche Cayenne (9PA) 4.8 32V (M48.51)

€2,499.00

Audi R8 / Lamborghini Gallardo V10 5.2 FCP H-beam steel connecting rods 154mm

Product detailed specification

Manufacturer: FCP Engineering
Model: FCPRHA15420R8-10
Profile: H-beam
C to C: 154mm
Big end diameter: 56.80mm
Pin diameter: 20mm
Quantity: 10 pcs., 20 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 1500HP+
Advertised RPM rating: 9000RPM
Audi R8 / Lamborghini Gallardo - 5.2 V10

€1,209.00