Home

Diaphragm assembly for Turbosmart WG38/40/45 TS-0505-3006

Included with:
Diaphragm assembly
3 grub screws (pre-installed)
Allen key
Sealing gasket
Circlip

€139.00

Audi S4 RS4 3.0 V6 Biturbo Stroker FCP forged piston kit 82.5mm CR 8.5

Part number: FCPPA825085RS4STR
Manufacturer: FCP Engineering
Forged high performance pistons for various applications in nearly all engine types for racing and street use.
Made of 4032-T6, piston skirt is molibden coated.
Each set of pistons also includes rings and HD series pins.
Bore size: 82.50mm
Compression ratio (CR): 8.5:1
Compression height: 27.50 mm
Pin diameter: 21mm
Stroke: 92.80mm
Audi S4 RS4 - 3.0 30V Stroker Biturbo

€1,169.00

Audi / VW 2.0 TSI EA888 FCP H-beam steel connecting rods 144mm/23mm for...

Product detailed specification

Manufacturer: FCP Engineering
Model: FCPRHATSI14450623
Profile: H-beam
C to C: 144mm
Big end diameter: 50.6mm
Pin diameter: 23mm
Big end width: 21.90mm
Quantity: 4 pcs., 8 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 600HP (4 cylinder)
Advertised RPM rating: 9000RPM
AUDI / VW - 2.0 16V TSI (EA888)

€439.00

Ecumaster Lambda to CAN module

Key features

•Bosch LSU 4.9 support (ADV version also available)
•Operating voltage range: 9 -16V
•Current consumption: up to 3A (during warm up)
•IP65 enclosure
•2 programmable analog outputs 0-5V
•Communication and setup: CAN 2.0A/B

€199.00

Opel / Vauxhall Corsa 1.6 16V Z16LET ARP cylinder head stud kit 209-Z16HSK

ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.

€279.00

Opel 2.0 C20LET Z20LET ACL Race Series main bearings 5M2327HX-STD

€113.00

Cometic Nissan RB26 2.6 1989-02 MLS cylinder head gasket 87x1.3mm C4320-051

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements

€245.00

Honda 2.0 2.4 K20 K24 Supertech valve spring kit SPRK-H1022D

Spring data:
Seat pressure 80lbs@40.40mm
Open (lift) pressure 215lbs@12mm
Max lift. 18.30mm
Rate 11.20lbs/mm
Spring coil bind 22.00mm
Outer spring outer diameter: 30.0mm
Outer spring inner diameter: 21.80mm
Inner spring outer diameter: 21.00mm
Inner spring inner diameter: 15.50mm

Set includes:
Dual springs: 16 pcs. SPR-H1022D
Titanium retainers: 16 pcs. RET-K20A2/T2
Seats: 16 pcs. SEAT-H1020D

€669.00

Turbosmart BOV / Blov-Off Valve Race Port Gen V Red TS-0204-1134

Supplied with:

    * Vacuum fittingsprofiled alloy weld flange, V-band assembly, and Blue Spring Rated -18 to -14 InHg (installed)
    * Billet 6000 series aluminium construction
    * Quick release v-band collar for ease of installation and removal
    * 2.0" Inlet flows over 330 CFM
    * MILSPEC hard anodized valve guide and stem
    * Hi Temp Silicon Nomex diaphragm
    * Positive sealing valve seat
    * Twin 1/8"NPT pressure ports for convenient positioning
    * Collar secured cap for quick spring changes
    * 4inHg to 26inHg activation range
    * 5 user configurable corrosion resistant springs available
    * Valve position sensor option
    *Designed, manufactured and validated in-house at Turbosmart HQ

Large capacity turbocharger systems and high horsepower engines. Ideal for circuit and drag vehicles and trucks.

€375.00

FCP gift card 300 eur

€300.00

Honda 2.0 2.2 F20C F22C Supertech intake valve HIVN-1030D STD

Product detailed specification
Model number	HIVN-1030D
Head diameter	36mm
Stem diameter	5.48mm
Length	109.85mm
Material	Black nitrited stainless steel
Fits for	Honda S2000 - 2.0 2.2 (F20C, F22C)

€24.00

Nissan 200SX SR20DET Wiseco pistons CR 9.1-9.25 86.50mm K556M865AP

Product detailed specification
Bore size	86.50mm
Stroke	86.00mm
Wiseco compression ratio (CR)	9.1-9.25:1
OEM compression ratio (CR)	8.5:1
Dome volume (CC)	-12cm³
Compression height (CH)	32.00mm
Pin diameter	22mm
Features	Accepts Turbo and Nitrous
Fits for	Nissan 180SX, 200SX (S13, S14) 2.0 16V (SR20DET)

Armor Plated wiseco pistons have almost a bronze colored tint to the top of the piston and the wrist pin bore. Wiseco's Armor Plating is an abrasion resistant plating that raises the hardness of the aluminum, increases the durability of the ring grooves, prevents micro-welding of the piston rings, reduces carbon buildup and combats corrosion caused by detonation. Wiseco's most popular pistons now include Armor Plating.

€799.00