Home

Audi / VW 1.8T 20V FSR series JE Pistons kit CR 9.25 82mm 353830

Product detailed specification
Bore size	82.00mm
Stroke	86.40mm
JE Pistons compression ratio (CR)	9.25:1
OEM compression ratio (CR)	9.5:1
Dome volume (CC)	-6.5cm³
Compression height (CH)	32.66mm
Pin diameter	20mm
Features	Accepts Turbo and Nitrous; FSR coated piston skirt Oil squirter modification isn't needed
Fits for	VAG 1.8T 20V

€899.00

Honda S2000 F20C F22C ACL Race main bearings 5M1913H-0.25

ENGINE BEARINGS
	MAIN BEARING SET
	Part#
	5M1913H	5M1913HX
Sizes	STD, 025, .25	STD
Oil Clearance	Standard	+ 0.001" Extra
Half Type	Identical Halves
Material	Tri-Metal
Min Std Shaft Size	2.1644in / 54.976mm
Max Std Shaft Size	2.1654in / 55mm
Min Std Tunnel Size	2.3622in / 60mm
Max Std Tunnel Size	2.363in / 60.02mm
Max Wall at Crown	0.0986in / 2.504mm	0.0981in /2.491mm
Max Overall Length	0.7874in / 20mm
Notes
Diagram (Top View)

Engines Honda S2000 - 2.0 2.2 (F20C, F22C)

€89.00

85mm piston ring set for one cylinder

€45.00

VAG 1.8-2.0 16V, 1.8T 20V, 1.9TDI ARP main stud kit 204-1.8MSK

ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.

€179.00

Cometic Nissan VG30D VG30DETT 3.0 V6 DOHC 24V MLS cylinder head gasket set...

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

€249.00

Audi / VW 2.0 16V TSI EA888 JE Pistons FSR Ultra Series CR 9.6 83mm 367861

Product detailed specification
Bore size	83.00mm
Stroke	92.80mm
JE Pistons compression ratio (CR)	9.6:1
OEM compression ratio (CR)	9.6:1
Dome volume (CC)	-6.4cm³
Compression height (CH)	29.30mm
Pin diameter	21mm
Features	Accepts Turbo and Nitrous; Ultra series
Fits for	Audi / VW 2.0 16V TSI chain driven engines EA888 (CAWA, CAWB, CCTA, CCZB, CAEA)

€1,069.00

Audi TT RS 2.5 20V TFSI DAZA ARP cylinder head stud kit 204-4708

ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.

€425.00

Ecumaster PMU 16 Autosport power management unit

€1,999.00

Ecumaster DUAL H Bridge

•2 H-Bridge 10A continous current, 30A peak
•Direct control or via CAN messages
•Free firmware upgrades
•Configurable via CAN BUS

€299.00

Audi / VW 2.0 TFSI EA113 FCP X-beam steel connecting rods 144mm/21mm for...

Product detailed specification

Manufacturer: FCP Engineering
Model: FCPRXATFSI14450621
Profile: X-beam (oiling channel from big end to piston pin)
C to C: 144mm
Big end diameter: 50.6mm
Pin diameter: 21mm
Quantity: 4 pcs., 8 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 800HP+ (4 cylinder)
Advertised RPM rating: 9000RPM
Audi / VW - 2.0 16V TFSI (EA113)

€549.00

Toyota 2.5 3.0 2JZGTE ACL Race main bearings 7M8103H-0.25

Sizes	STD, .025, .25
Oil Clearance	Standard
Half Type	Upper & Lower
Material	Tri-Metal
Min. Std Shaft Size	2.4403in / 61.984mm
Max. Std Shaft Size	2.441in / 62.001mm
Min. Std Tunnel Size	2.5992in / 66.02mm
Max. Std Tunnel Size	2.5998in / 66.035mm
Max Wall at Crown	0.0789in / 2.004mm
Max Overall Length	0.7874in / 20mm (8103H/HX) 0.9055in / 23mm (8104H/HX)
Weight	0.44
Notes	0

€199.00

Nissan Skyline RB25DET / RB26DETT ACL Race connecting rod bearings 6B2960H-0.25

Sizes	STD, .025, .25, .50
Oil Clearance	Standard
Half Type	Identical Halves
Material	F781
Min. Std Shaft Size	47.956
Max. Std Shaft Size	47.974
Min. Std Tunnel Size	51.000
Max. Std Tunnel Size	51.013
Max Wall at Crown	1,503
Max Overall Length	17,1
Weight	0.22
Notes	0

€99.00