Home

Nissan GT-R 3.8 VR38DETT Mahle piston kit CR 9.0 95.51mm 929942860

Product detailed specification
Bore size	95.51mm
Stroke	88.40mm
Mahle motorsport compression ratio (CR)	9.0:1
OEM compression ratio (CR)	9.0:1
Dome volume (CC)	-4cm³
Compression height (CH)	34.25mm
Pin diameter	23mm
Features	PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications
Fits for	Nissan GT-R - 3.2 (V38DETT)

€1,349.00

BMW M5 E39 S62B50 ACL Race connecting rod bearings 8B1591H-STD

€249.00

BMW 2.0 Turbo N20B20 FCP H-beam steel connecting rods 144.3mm for aftermarket...

Product detailed specification
Manufacturer: FCP Engineering
Model: FCPRHB144353622-4
Profile: H-beam
C to C: 144.3mm
Big end diameter: 53.6mm
Pin diameter: 22mm
Quantity: 4 pcs., 8 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 700HP (4 cylinder)
Advertised RPM rating: 9000RPM
Fits aftermarket pistons

€439.00

Honda 2.0 2.2 F20C F22C Supertech intake valve HIVN-1030F STD

Product detailed specification
Model number	HIVN-1030F
Head diameter	36mm
Stem diameter	5.48mm
Length	109.85mm
Material	Black nitrited stainless steel
Fits for	Honda S2000 - 2.0 2.2 (F20C, F22C)

€24.00

BMW / Toyota 3.0 24V B58 S58 FCP racing conical spring and retainer kit

Valve springs data
Installed seat pressure - 34kg (75lbs)
Load - 63kg@10mm (140lbs@10mm)
Max lift - up to 12mm
Made from chrome-silicon steel SAE9254-V
BMW / Toyota - 3.0 24V Turbo (B58, S58)
With this set the risk of valve flutter and a possible engine failure is minimized.
Recommended for engines with series and racing camshafts and over 7500 RPM.
Kit includes:
24 pcs. conical valve springs
12 pcs. titanium retainers 5mm
12 pcs. titanium retainers 6mm

€799.00

Cometic BMW B58B30M0 / B58B30M1 MLX cylinder head gasket 83x0.9mm C14121-036

COMETIC MLX (Multi-Layer Stopper) gaskets utilize an integrated stopper layer for combustion chamber sealing and improved clamp load around the cylinder without increasing bore distortion. MLX technology can be found in some head gaskets and are made from the same materials as our MLS Head Gaskets. No sealants or re-torque required.

€289.00

BMW N57D30A / B / C FCP H-beam steel connecting rods 138mm

Manufacturer: FCP Engineering
Model: FCPRHB13853632-6
Profile: H-beam
C to C: 138mm
Big end diameter: 53.6mm
Pin diameter: 32mm
Quantity: 6 pcs., 12 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 800HP (6 cylinder)
Advertised RPM rating: 7000RPM
BMW Diesel - 3.0 24V (N57D30A, N57D30B, N57D30C)

€849.00

Chrysler V8 345, 370 (OHV 16V) ACL Race Series connecting rod bearings...

€229.00

Audi RS6 C5 4.2 40V V8 BITURBO JE forged pistons CR 9.5 84.5mm

Product detailed specification
Bore size	84.50mm
Stroke	93.00mm
JE Pistons compression ratio (CR)	9.5:1
Dome volume (CC)	-12cm³
Compression height (CH)	31.78mm
Pin diameter	21mm
Features	Accepts Turbo and Nitrous; HD pins
Fits for	Audi RS6 C5 - 4.2 40V V8 Biturbo (BCY, BRV)

€2,699.00

Audi / VW 2.0 16V TSI EA888 GEN 3 King Racing main bearings MB5779XP-STD

€115.00

FORD EcoBoost 2.3L Mahle piston kit CR 9.5 87.51mm 197937145

Product detailed specification
Bore size	87.51mm
Stroke	94.00mm
Mahle motorsport compression ratio (CR)	9.5:1
OEM compression ratio (CR)	9.5:1
Dome volume (CC)	-6.5cm³
Compression height (CH)	32.80mm
Pin diameter	22.5mm
Features	4032 alloy
Fits for	Ford Ecoboost 2.3L

€1,049.00

BMW M5 E39 S62B50 King racing main bearings MB5872XP-STD

Upper	Lower	Quantity	Position	Crankshaft	Housing	Max Length	Max Wall
SX	SX	5	1-5	69.99 / 69.97	75.02 / 75.00	23.9	2.507

€299.00