Home

Lancia Delta Integrale 2.0 HF ACL Race Series connecting rod bearings 4B2904HX

€89.00

Audi S6 RS6 C6 5.0 5.2 V10 Supertech valve spring set SPR-A2416-V10

Spring data:
Seat pressure - 73lbs @ 37.40mm (intake), 85lbs @ 36mm (exhaust)
Open (lift) pressure - 178lbs @ 10mm (intake), 190lbs @ 10mm (exhaust)
Max lift - 12.50mm (intake), 11.00mm (exhaust)
Spring coil bind - 24.90mm
Rate - 10.50lbs/mm
Spring outer diameter - 24.00mm
Spring inner diameter - 16.50mm

Set includes:
Single springs - 40 pcs. SPR-A2416

€860.00

Opel Corsa VXR OPC GSI 1.6 8V-16V ACL Race Series connecting rod bearings...

Sizes	STD, .025, .25
Oil Clearance
Half Type
Material
Min. Std Shaft Size	42,971
Max. Std Shaft Size	42,987
Min. Std Tunnel Size	46,000
Max. Std Tunnel Size	46,013
Max Wall at Crown	1.495
Max Overall Length	16.63
Weight	0.12
Notes

€75.00

Opel 2.8 Z28NEL Z28NET ACL Race Series connecting rod bearings 6B2270H-0.25

Sizes	STD, .025, .25
Oil Clearance	Standard
Half Type	Identical Halves
Material	Tri-metal Hardened steel backs
Min. Std Shaft Size	2.204in / 55.992mm
Max. Std Shaft Size	2.205in / 56.008mm
Min. Std Tunnel Size	2.347in / 59.620mm
Max. Std Tunnel Size	2.348in / 59.636mm
Max Wall at Crown	0.0708in / 1.798mm
Max Overall Length	0.7303in / 18.55mm

€149.00

OEM Nissan R35 GTR VR38DETT crankshaft 12201JF00A

€1,649.00

Audi TTRS / RS3 CEPA CEPB ACL Race Series main bearings 6M5563HX-STD

€195.00

BMW M50B25 / M50B28 Wiseco pistons CR 8.8 / 9.3 84mm KE315M84

Product detailed specification
Bore size	84.00mm
Stroke	75.00mm
Wiseco compression ratio (CR)	8.8:1 / 9.3:1
OEM compression ratio (CR)	10.5:1
Dome volume (CC)	-13.5cm³
Compression height (CH)	33.20mm
Pin diameter	22mm
Features	Accepts Turbo and Nitrous; FSR piston skirt
Fits for	BMW E36, E34 - 2.5 / 2.8 24V (M50B25 / M50B28)

Wiseco ArmorGlide skirt coating is a dry film lubricant applied to the piston skirt. This coating helps reduce friction, improving performance, and will also help quiet the piston in the cylinder bore. This coating is permanently applied, and is not a break in coating, it is on the piston for the life of the part.

€1,229.00

Audi / VW 2.0 TFSI EA113 FCP H-beam steel connecting rods 144mm / 20mm for...

Product detailed specification

Manufacturer: FCP Engineering
Model: FCPRHATFSI14450620
Profile: H-beam
C to C: 144mm
Big end diameter: 50.6mm
Pin diameter: 20mm
Big end width: 24.95mm
Quantity: 4 pcs., 8 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 600HP (4 cylinder)
Advertised RPM rating: 9000RPM
AUDI / VW - 2.0 16V TFSI (EA113)

€439.00

Ford / Mazda 2.0 LF Duratec ACL Race Series connecting rod bearings 4B4390H-0.25

€55.00

BMW / Mini 2.0 B48 Supertech valve spring kit SPRK-B48B

Seat pressure - 77lbs @ 40.10mm
Open (lift) pressure - 180lbs @ 10mm
Spring coil bind - 27.00mm
Rate - 10.30lbs/mm
Max lift - 12.20mm
Outer spring outer diameter: 26.50mm
Outer spring inner diameter: 18.70mm
Inner spring outer diameter: 21.60mm
Inner spring inner diameter: 13.80mm

Set includes:
Dual springs: 16 pcs. SPR-FE20BE
Titanium retainers: 8 pcs. RET-BMB48/TE and 8 pcs. RET-BMB48/TI

€689.00

Toyota 2.8 3.0 5M-GE 7M-GE/7M-GTE ACL Duraglide connecting rod bearings...

€75.00

Cometic Turbo twin scroll T4 gasket C4513

€15.00

BMW M3 S54B32 Xtreme Performance 230mm Ceramic Twin Plate Clutch KBM23550-2E

Xtreme Clutch 230mm twin plate kit

The Xtreme Clutch 230mm Race Clutch is available with either ceramic, organic or carbon friction materials, making these kits ideal for high horsepower and motorsport applications where a high heat capacity is required.

The Xtreme 230mm Race Clutch is the ultimate in clutch solutions with a range like no other. The 230mm range boasts a variety of kits to suit most high horsepower applications for street, circuit, drift or race use. The Xtreme 230mm Race Clutch has been designed, allowing for endless options with clutch operation with internal hydraulic options and pull-push conversions a factoring feature in the 230mm range.

Product Features:

Torque capacity 1800Nm
Kit contains everything you need for a successful installation + accessories
Push type billet alloy cover Low pedal effort
4140 Chromoly pressure & intermediate plates
Chromoly adapter ring
Low inertia
Serviceable components
SFI certified design

	Flat Diaphragm	Rolled Diaphragm
Clamping Force	1300kg	1300kg
Torque Rating	1800Nm	1800Nm
Bearing Contact Diameter	65mm	FLAT BEARING
Bearing Load (@ 48mm)	180kg	150kg
Release Travel Required	7mm	7mm
Assembly Mass (without flywheel)	8.30kg	8.30kg
Disc Set Static Mass	2.25kg	2.25kg
Friction Thickness New	8mm (0.315")	8mm (0.315")
Friction Thickness Worn	7.5mm (0.295")	7.5mm (0.295")

€1,999.00

VW 2.0 16V ABF Wiseco pistons CR 8.5 82.5mm KE188M825

Product detailed specification
Bore size	82.50mm
Stroke	92.80mm
Wiseco compression ratio (CR)	8.5:1
OEM compression ratio (CR)	10.5:1
Dome volume (CC)	-11cm³
Compression height (CH)	30.60mm
Pin diameter	21mm
Features	FSR series skirt
Fits for	VW / Seat - 2.0 16V ABF

Wiseco ArmorGlide skirt coating is a dry film lubricant applied to the piston skirt. This coating helps reduce friction, improving performance, and will also help quiet the piston in the cylinder bore. This coating is permanently applied, and is not a break in coating, it is on the piston for the life of the part.

€829.00

Chevrolet V8 LS1 LS2 LS3 LS6 ACL Race Series main bearings 5M7298H-STD

€299.00

Turbosmart oil pressure regulator 40psi OPR T40 TS-0801-1003

Many Turbochargers are built around a bearing and oil pressure profile much lower than is seen by modern & hi-performance, engines and feeding these turbochargers the appropriate amount of oil pressure hase always been a challenge. Traditional methods to limit oil pressure have been with a restrictor, aimed at reducing pressure – However this also reduces flow.

Turbosmart’s OPR T40 is a true regulator in that target oil pressure oil 40psi can be achieved without compromising oil flow. This takes the guess work out of restrictor, or feed and drain hose selection and ensure the oil going to the turbocharger, never exceeds the manufacturers tolerances – This will provide you rock solid oil supply pressure, within the manufactures tolerances.

€179.00

Mercedes Benz AMG 5.5 V8 Biturbo M157 FCP H-beam steel connecting rods 146.5mm

Manufacturer: FCP Engineering
Model: FCPRHMB146524-8
Profile: H-beam
C to C: 146.5mm
Pin diameter: 24mm
Quantity: 8 pcs., 16 pcs. ARP2000 5/16" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 1000HP (8 cylinder)
Advertised RPM rating: 9000RPM
Fit for: Mercedes Benz AMG - 5.5 V8 (M157)

€1,099.00

Audi / VW 2.0 16V TFSI Wossner piston kit 83mm CR 10.5 K9517D050

Product detailed specification
Bore size	83.00mm
Stroke	92.80mm
Wossner compression ratio (CR)	10.5:1
OEM compression ratio (CR)	10.5:1
Dome volume (CC)	-6.20cm³
Compression height (CH)	29.50mm
Pin diameter	20mm
Fits for	VAG 2.0 16V TFSI (EA113)

€899.00

Audi / VW 2.0 16V TSI EA888 Wossner piston kit CR 9.6 83mm K9494D050

Product detailed specification
Bore size	83.00mm
Stroke	92.80mm
Wossner compression ratio (CR)	9.6:1
OEM compression ratio (CR)	9.6:1
Dome volume (CC)	-8.90cm³
Compression height (CH)	29.60mm
Pin diameter	23mm
Fits for	Audi / VW - 2.0 16V TSI / TFSI (EA888 chain driven)

€899.00

BMW M5 E60 S85B50 King Racing main bearings MB637XP-0.25

Pairs & PN

XP	XP

M5803UPR	M5803LPR

XP	XP

MK5803UPR	MK5803LPR

Quantity

5

1

Crankshaft

59.969 / 59.982

Housing

0.000 / 65.034

Max Wall

2.497

Max Length

21.699

27.541

€279.00

Audi / VW 1.9 TDi PD FCP valve single inner spring set

€99.00

BMW 1.6 1.8 M40 M42 M43, S42 USA FCP valve guide kit 7mm

€99.00

Cometic BMW 1.8 1.9 M42 M44 MLS cylinder head gasket 86x3mm C4349-120

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

€299.00

Subaru WRX 2.0 16V EJ20 Mahle piston kit CR 8.0 93mm 930020362

Product detailed specification
Bore size	93.00mm
Stroke	75.00mm
Mahle compression ratio (CR)	8.0:1
OEM compression ratio (CR)	8.0:1
Dome volume (CC)	-12cm³
Compression height (CH)	32.70mm
Pin diameter	23mm
Features	PowerPak Plus 2618 Alloy & Hard Anodized Top Ring Groove For Extreme Duty Applications
Fits for	Subaru Impreza WRX STI - 2.0 16V (EJ20, EJ205, EJ207)

€799.00