Home

Chrysler V8 345, 370 (OHV 16V) ACL Race Series main bearings 5M2220H-STD

€149.00

Ford 1.0L Ecoboost Turbo ACL Race Series connecting rod bearings 3B7328H-0.25

€89.00

FIAT Punto / 500 Abarth Athena Cooper Ring cylinder head gasket 73.5x1.2mm...

Athena Racing 330 series Cooper Ring cylinder head gasket set.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).
Part number: 330146R
Gasket thickness: 1.20mm
Bore size: 73.50mm

Part number starting with 330
Athena advantages
Reinforced material	Asbestos free composite raw material OE approved
Stainless steel ring (AISI304)	Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required
Silicon beading	Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages

€199.00

Audi / VW 1.8-2.0 8V, 2.2T 10V FCP valve guide (7mm conversion)

€10.00

Honda 1.5 1.6 ACL Race connecting rod bearings 4B1956H-0.25

ENGINE BEARINGS
	CON ROD BEARING SET
	Part#
	4B1956H	4B1956HX
Sizes	STD, 025, .25	STD
Oil Clearance	Standard	+ 0.001" Extra
Half Type	Identical Halves
Material	Tri-metal Hardened steel backs
Min Std Shaft Size	1.7709in / 44.98mm
Max Std Shaft Size	1.7717in / 45mm
Min Std Tunnel Size	1.8898in / 48mm
Max Std Tunnel Size	1.8906in / 48.02mm
Max Wall at Crown	0.0592in / 1.504mm	0.0587in /1.491 mm
Max Overall Length	0.7283in / 18.5mm
Notes
Diagram (Top View)

Engines Honda - 1.5 1.6 (D16A6, D16Y5, D16Y7, D16Y8, D16Z6)

€69.00

Pulsar 5449G Dual Ball Bearing Turbocharger 660HP T3 0.72A/R V-band

Compressor Wheel: 54*67mm
Turbine Wheel: 54*49mm
Compressor Inlet: 3″ Hose
Compressor Outlet: 2″ Hose
Turbine Inlet: T3
Turbine Outlet: 3″ V-Band
Water Ports: -6AN
Oil Feed: -4AN to the Oil Restrictor
Oil Drain: Std T3 Oil Drain Flange

€1,249.00

BMW N20B20 N26B20 ACL Race connecting rod bearings 4B1584H-0.25

€140.00

Audi S2 RS2 2.5 20V Turbo Stroker FCP forged pistons 82.50mm CR 8.5

Part number: FCPPASTR825085/5
Manufacturer: FCP Engineering
Forged high performance pistons for various applications in nearly all engine types for racing and street use.
Made of 4032-T6, piston skirt is molibden coated.
Each set of pistons also includes rings and HD series pins.
Bore size: 82.50mm
Compression ratio (CR): 8.5:1
Compression height: 29.00 mm
Pin diameter: 22mm
Stroke: 95.50mm with 236mm diesel engine block
Audi 200, S2, RS2, S4, S6 - 2.2 2.5 20V Turbo
Connecting rod length must 159mm

€989.00

Boostline Conrod Set BMW / Toyota B58B30 148.18mm 625+ BM5834-866+

Purpose-Built For Boost High Boost and BMW B58B30 Applications
Forged From Ultra-Strong 4340 Steel
Patented Three-Pocket Design
Capable of 1500 HP
3/8 x 1.600 in. ARP CA625+ Fasteners
High Quality APMCO Bronze Pin Bushing
26 Point Detailed CMM Inspection Report Included

€2,399.00

BMW 135i 335i N54B30 Ultra series JE Piston kit 84mm CR 9.5 367877

Product detailed specification
Bore size	84.00mm
Stroke	89.60mm
JE Pistons compression ratio (CR)	9.5:1
OEM compression ratio (CR)	10.2:1
Dome volume (CC)	-21.3cm³
Compression height (CH)	31.60mm
Pin diameter	22mm
Features	Accepts Turbo and Nitrous; Ultra series
Fits for	BMW - 3.0 24V Turbo (N54B30)

€1,649.00

Boostline Conrod Set Audi S2 2.2 20V 144mm 20mm VW5670-787

Purpose-Built For Boost High Boost and Nitrous Audi S2 / RS2 Applications with 20mm Pin
Forged From Ultra-Strong 4340 Steel
Patented Three-Pocket Design
Capable of 1000+ HP
3/8 x 1.600 in. ARP 2000 Fasteners
High Quality APMCO Bronze Pin Bushing
26 Point Detailed CMM Inspection Report Included

€1,499.00

Boostline Conrod Set Mitsubishi Evo X 4B11T 143.7MM MI5657-905+

Purpose-Built For Boost High Boost and Nitrous Mitsubishi Evo X 4B11T Applications
Forged From Ultra-Strong 4340 Steel
Patented Three-Pocket Design
Capable of 1000+ HP
3/8 x 1.600 in. ARP 625+ Custom Aged Fasteners
High Quality APMCO Bronze Pin Bushing
26 Point Detailed CMM Inspection Report Included

€1,649.00

BMW 2.5 2.8 3.0 M50 M52 M54 FCP valve spring kit for 7mm valves

Valve springs data:

Installed seat pressure - 38kg (84lbs)

Load - 92kg@10mm (203lbs@10mm)

Max. lift - up to 11mm

Made from chrome-silicon steel SAE9254-V

24 pcs. outer springs

24 pcs. inner springs

24 pcs. titanium retainers

24 pcs. seats

With this set the risk of valve flutter and a possible engine failure is minimized.
Recommended for engines with series and racing camshafts and over 7500 RPM.

€749.00

Boostline conrod set Subaru EJ20/EJ257 130.50mm SB5137-905+

Purpose-Built For Boost High Boost and Nitrous Subaru EJ20/25 Turbo Applications
Forged From Ultra-Strong 4340 Steel
Patented Three-Pocket Design
Capable of 1000+ HP
3/8 x 1.600 in. ARP 625+ Custom Aged Fasteners
High Quality APMCO Bronze Pin Bushing
26 Point Detailed CMM Inspection Report Included

€1,649.00

BMW M3 E46 3.2 S54B32 Athena Cooper Ring cylinder head gasket 88x1.2mm 330077R

Athena Racing 330 series Cooper Ring cylinder head gasket.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).
Part number 330077R
Gasket thickness: 1.20mm
Bore size: 88.00mm

Part number starting with 330
Athena advantages
Reinforced material	Asbestos free composite raw material OE approved
Stainless steel ring (AISI304)	Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required
Silicon beading	Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages

€299.00

Cometic BMW 3.0 S58B30T0 (2020+) MLX cylinder head gasket 85x0.91mm C15696-036

COMETIC MLX (Multi-Layer Stopper) gaskets utilize an integrated stopper layer for combustion chamber sealing and improved clamp load around the cylinder without increasing bore distortion. MLX technology can be found in some head gaskets and are made from the same materials as our MLS Head Gaskets. No sealants or re-torque required.

€299.00

BMW M5 S63B44 Supertech Intake / Exhaust Valve seal VSI-EC60E

€3.00

Toyota Corolla Silver / Black Top 4AGE Supertech exhaust valve TEVN-1018 +1mm

Product detailed specification
Model number	TEVN-1018
Head diameter	27.00mm
Stem diameter	4.97mm
Length	108.40mm
Material	Black nitrided stainless steel
Fits for	Toyota Silver / Black Top 20V - 4AGE

€28.00

BMW N62/N63/S63B44 (-2011) King Racing Connecting rod bearings CR8049GPC

Upper	Lower	Quantity	Position	Crankshaft	Housing	Max Length	Max Wall
SV	SV	8		53.99 / 53.97	57.61 / 57.60	14.8	1.796

€209.00

BMW M57D30 FCP H-beam steel connecting rods 136mm

Manufacturer: FCP Engineering
Model: FCPRHB1364830-6
Profile: H-beam
C to C: 136mm
Big end diameter: 48mm
Pin diameter: 30mm
Quantity: 6 pcs., 12 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 800HP (6 cylinder)
Advertised RPM rating: 7000RPM
BMW Diesel - 3.0 24V (M57D30)

€849.00

Cometic Peugeot 1.6L 16V TU5J4 MLS Cylinder headgasket 79x1.52mm C4493-060

COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

€183.00

Ecumaster GDI driver

€899.00

Wiseco Tapered Piston Ring Compressor Sleeve 82.5mm RCS08250

€59.00

BMW M3 M4 3.0 S58B30 ARP cylinder head stud kit 201-4705

€589.00