There are no items in cart
|
Product detailed specification |
|
|
Bore size |
82.50mm |
|
Stroke |
92.80mm |
|
JE Pistons compression ratio (CR) |
10.3:1 |
|
OEM compression ratio (CR) |
10.5:1 |
|
Dome volume (CC) |
-3.7cm3 |
|
Compression height (CH) |
29.60mm |
|
Pin diameter |
20mm |
|
Features |
Accepts Turbo and Nitrous, Round piston skirt |
|
Fits for |
Audi / VW - 2.0 TFSI EA113 (AXX, BGB, BPJ, BPY, BWA) |
| ENGINE BEARINGS | ||
 |
MAIN BEARING SET |
|
| Part# | ||
| 5M1219H |
5M1219HX |
|
| Sizes | STD,.025, .25 | STD |
| Oil Clearance | Standard | + 0.001" Extra |
| Half Type | Upper & Lower | |
| Material | Tri-Metal | |
| Min Std Shaft Size |
2.2435in / 56.985mm |
|
| Max Std Shaft Size |
2.2441in / 57.000mm |
|
| Min Std Tunnel Size |
2.4016in / 61.000mm |
|
| Max Std Tunnel Size |
2.4024in / 61.021mm |
|
| Max Wall at Crown |
0.0783in / 1.990mm |
0.0778in / 1.977mm |
| Max Overall Length |
0.8268in / 21.00mm |
|
| Notes | For engines equipped with thrust washers | |
|
Diagram |
 |
|
| ENGINE BEARINGS | ||
|
MAIN BEARING SET |
|
| Part# | ||
| 5M1644H |
5M1644HX |
|
| Sizes | STD, .25, .50 | STD |
| Oil Clearance | Standard | + 0.001" Extra |
| Half Type | Upper & Lower | |
| Material | Tri-metal | |
| Min Std Shaft Size | 2.1243in / 53.958mm | |
| Max Std Shaft Size | 2.1251in / 53.978mm | |
| Min Std Tunnel Size | 2.3228in / 59.000mm | |
| Max Std Tunnel Size | 2.3236in / 59.019mm | |
| Max Wall at Crown | 0.0985in / 2.502mm | 0.0980in / 2.489mm |
| Max Overall Length | 0.728in / 18.49mm | |
| Notes | Set contain 6 x 1648H and 4 x 1644H shells. Use 1648H shell in #4 position as upper and lower. | |
|
Diagram |
|
|
|
Product detailed specification |
|
|
Model number |
BMEVN-1031S |
|
Head diameter |
31.50mm |
|
Stem diameter |
5.96mm |
|
Length |
105.65mm |
|
Material |
Black nitrided stainless steel |
|
Fits for |
BMW - 1.8 2.5 2.8 3.0 (S42,M42,M50,S50,M52,S52,M54) |
| 1,2,3,4,5 | |||||||
| Pairs & PN |
|
||||||
| Quantity | 5 | ||||||
| Crankshaft | 57.000 / 56.985 | ||||||
| Housing | 61.001 / 61.021 | ||||||
| Max Wall | 1.989 | ||||||
| Max Length | 20.599 |
|
Product detailed specification |
|
|
Model number |
TEVI-1016 |
|
Head diameter |
30.00mm |
|
Stem diameter |
5.97mm |
|
Length |
99.10mm |
|
Material |
Inconel |
|
Fits for |
Toyota Supra - 3.0 (2JZGE, 2JZGTE) |
Athena Racing 330 series Cooper Ring cylinder head gasket.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).
Part number: 330023R
Gasket thickness: 1.50mm
Bore size: 87.60mm
|
Part number starting with 330 |
|
|
Athena advantages |
|
|
Reinforced material |
Asbestos free composite raw material OE approved |
|
Stainless steel ring (AISI304) |
Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required |
|
Silicon beading |
Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages |
|
Product detailed specification |
|
|
Model number |
BMEVI-1040S |
|
Head diameter |
30.50mm |
|
Stem diameter |
5.95mm |
|
Length |
119.10mm |
|
Material |
Black nitrited stainless steel |
|
Fits for |
BMW M3 E46 - 3.2 (S54B32) |
| Pairs & PN |
|
||||||
|---|---|---|---|---|---|---|---|
| Quantity |
4 | ||||||
| Crankshaft |
64.950 / 64.976 | ||||||
| Housing |
69.992 / 70.018 | ||||||
| Max Wall |
2.517 | ||||||
| Max Length |
18.699 |
100% genuine BERU ignition coil.
FSI TFSI TSI ignition coils got better spark than standard coils.
Used for extreme applications.
| 1,2,3,5 | 4 | |||||||||||||
| Pairs & PN |
|
|
||||||||||||
| Quantity | 4 | 1 | ||||||||||||
| Crankshaft | 53.978 / 53.957 | 53.978 / 53.957 | ||||||||||||
| Housing | 58.999 / 59.017 | 58.999 / 59.017 | ||||||||||||
| Max Wall | 2.499 | 2.499 | ||||||||||||
| Max Length | 18.461 | 18.461 |
Part number 61-31350-00
Victor Reinz MLS cylinder head gasket set
Audi A4, A6, S4, Allroad - 2.4 2.7T V6
|
|
|
|||||||||||||||||||
| Quantity | 1 | 2 | 2 | ||||||||||||||||||
| Crankshaft | 60.000 / 59.985 | 60.000 / 59.985 | 60.000 / 59.985 | ||||||||||||||||||
| Housing | 64.000 / 64.021 | 64.000 / 64.021 | 64.000 / 64.021 | ||||||||||||||||||
| Max Wall | 2.004 | 2.004 | 2.004 | ||||||||||||||||||
| Max Length | 22.962 | 18.999 | 15.113 |
|
Product detailed specification |
|
|
Bore size |
82.50mm |
|
Stroke |
92.80mm |
|
JE Pistons compression ratio (CR) |
9.6:1 |
|
OEM compression ratio (CR) |
9.6:1 |
|
Dome volume (CC) |
-7.1cm3 |
|
Compression height (CH) |
29.60mm |
|
Pin diameter |
23mm |
|
Features |
Accepts Turbo and Nitrous; full round skirt |
|
Fits for |
Audi / VW 2.0 16V TSI chain driven engines EA888 (CAWA, CAWB, CCTA, CCZB, CAEA) |
Athena Racing 338 series multilayer steel (MLS) cylinder head gasket.
Athena MLS gaskets are designed to suit the requirements of today’s competition engines offering enhanced sealing compared to the OEM product. The gaskets are assembled from 2-5 layers of high quality stainless and spring steels.
Part number: 338463R
Gasket thickness: 1.35mm
Bore size: 82mm
|
Part number starting with 338 |
|
|
Athena advantages |
|
|
Optimized radius embossing shape |
The round shape of the embossing increases sealing on cylinder bore, oil and cooling water passages and improves spring back strength |
|
Advanced stopper technology |
State of the technology enhances sealing pressure around the cylinder. Highest sealing properties in high power engines |
|
Coating technology |
Designed & engineered by Athena the special coating applied on steel surfaces, improves temperature resistance & reliability of the head gasket |
