There are no items in cart
Fits for 6 cylinder Audi 2.7T 2.8 3.0 30V V6 engines.
Can be used with orginal springs or together with FCP high performance valve double spring kit.
Kit helps to eliminate valve float.
Retainers are very strong and light. Weight is only 9g and 4g. Grade 5.
18 pcs. intake valve titanium retainers
12 pcs. exhaust valve titanium retainers
Athena Racing 338 series multilayer steel (MLS) cylinder head gasket.
Athena MLS gaskets are designed to suit the requirements of today’s competition engines offering enhanced sealing compared to the OEM product.
The gaskets are assembled from 2-5 layers of high quality stainless and spring steels.
Part number: 338320R
Gasket thickness: 0.65mm
Bore size: 84.10mm
|
Part number starting with 338 |
|
|
Athena advantages |
|
|
Optimized radius embossing shape |
The round shape of the embossing increases sealing on cylinder bore, oil and cooling water passages and improves spring back strength |
|
Advanced stopper technology |
State of the technology enhances sealing pressure around the cylinder. Highest sealing properties in high power engines |
|
Coating technology |
Designed & engineered by Athena the special coating applied on steel surfaces, improves temperature resistance & reliability of the head gasket |
Diameter: 240mm
Manufacturer compare numbers:
AUDI
038 141 025 C
038 141 025 R
FORD
YM21-7563-BA
YM21-7563-CA
1119159
1131841
SEAT
038 141 025 C
038 141 025 R
SKODA
038 141 025 R
VOLKSWAGEN
038 141 025 C
038 141 025 R
Compared to volume production pressure plates, SACHS Performance pressure plates have a higher transmittable torque and are less sensitive to thrust loading. Depending on the requirements, they are used with different discs. Higher pedal forces might occur.
|
Product detailed specification |
|
|
Bore size |
82.50mm |
|
Stroke |
92.80mm |
|
JE Pistons compression ratio (CR) |
9.1:1 |
|
OEM compression ratio (CR) |
9.6:1 |
|
Dome volume (CC) |
-10.80cm3 |
|
Compression height (CH) |
29.60mm |
|
Pin diameter |
21mm |
|
Piston weight |
295g |
|
Features |
Accepts Turbo and Nitrous; full round Tuff coated piston skirt |
|
Fits for |
Audi / VW 2.0 TSI EA888 (CAWA, VAWB, CCTA, CCZB, CAEA) |
For the first time ever, 2618-alloy pistons can be installed with piston-to-wall clearances near that of an OEM piston!
| ENGINE BEARINGS | ||
 |
MAIN BEARING SET |
|
| Part# | ||
| 5M2167H |
5M2167HX |
|
| Sizes | STD, .25, .50 | STD |
| Oil Clearance | Standard | + 0.001" Extra |
| Half Type | Identical Halves | |
| Material | Tri-Metal | |
| Min Std Shaft Size |
2.2437 in / 56.990 mm |
|
| Max Std Shaft Size | 2.2441 in / 57.000mm | |
| Min Std Tunnel Size | 2.3866 in / 60.620 mm | |
| Max Std Tunnel Size | 2.3874 in / 60.640 mm | |
| Max Wall at Crown | 0.0710 in / 1.803 mm |
0.0705 in / 1.790 mm |
| Max Overall Length | 0.935 in / 23.75 mm | |
| Notes | ||
|
Diagram (Top View) |
 |
|
| ENGINE BEARINGS | ||
|
CON ROD BEARING SET |
|
| Part# | ||
| 4B2166H |
4B2166HX |
|
| Sizes | STD, .25, .50 | STD |
| Oil Clearance | Standard | + 0.001" Extra |
| Half Type | Identical Halves | |
| Material |
Tri-metal Hardened steel backs |
|
| Min Std Shaft Size |
2.0468 in / 51.990 mm |
|
| Max Std Shaft Size | 2.0472 in / 52.000 mm | |
| Min Std Tunnel Size | 2.1654 in / 55.000 mm | |
| Max Std Tunnel Size | 2.1661 in / 55.020 mm | |
| Max Wall at Crown | 0.0589 in / 1.496 mm | 0.0584 in / 1.483 mm |
| Max Overall Length |
0.792 in / 20.12 mm |
|
| Notes | ||
|
Diagram |
 |
|
Athena Racing 330 series Cooper Ring cylinder head gasket set.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).
|
Part number starting with 330 |
|
|
Athena advantages |
|
|
Reinforced material |
Asbestos free composite raw material OE approved |
|
Stainless steel ring (AISI304) |
Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required |
|
Silicon beading |
Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages |
|
Product detailed specification |
|
|
Bore size |
86.00mm |
|
Stroke |
88.00mm |
|
Wossner compression ratio (CR) |
9.0:1 |
|
OEM compression ratio (CR) |
8.8:1 |
|
Dome volume (CC) |
-5.20cm3 |
|
Compression height (CH) |
34.30mm |
|
Pin diameter |
22mm |
|
Fits for |
Mitsubishi EVO 2.0 16V Turbo (4G63) |
Diameter: 228mm
Manufacturer compare numbers:
021 141 025 E
021 141 025 F
037 141 025 C
037 141 025 G
Compared to volume production pressure plates, SACHS Performance pressure plates have a higher transmittable torque and are less sensitive to thrust loading. Depending on the requirements, they are used with different discs. Higher pedal forces might occur.
|
Part number starting with 330 |
|
|
Athena advantages |
|
|
Reinforced material |
Asbestos free composite raw material OE approved |
|
Stainless steel ring (AISI304) |
Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required |
|
Silicon beading |
Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages |
Clutch disc, torsion damped, with special ceramic clutch friction material.
Diameter: 228mm
Number of Teeth: 28
Hub Profile: 20,3x22,1-28N
Transmittable torque: 520Nm
Manufacturer compare numbers:
VOLKSWAGEN
021 141 031 (B, C, D, E, K, L)
023 141 031 (B, C, D, E, F, G, H, K)
028 141 035 (A, B, C)
037 141 032 (J, K, L, M, S, T)
037 141 033 (A, B, C, D, E, F, G, K, L, M, N, A, B)
038 141 032
044 141 031 (M, N, P, Q, R, S)
044 141 032 (T, E, F, H, J, K, L, M, N, P)
074 141 031 (E, F, G, H, L, M, N, P)
