Click here to open old website version
All categories
Parts by Car
Go
Parts by Car
Go

Audi TTRS RS3 2.5 20V TFSI FCP H-beam steel connecting rods 144mm/23mm for OEM pistons

Part number FCPRHA14450623T-5
FCP H-beam steel connecting rods kit (5 pcs.) 144mm for OEM pistons
Audi TT RS, RS3 - 2.5 20V TFSI (DAZA, DNWA)
€539.00
Availibilty:1 items
Information

Product detailed specification

Manufacturer: FCP Engineering

Model: FCPRHA14450623T-5
Profile: H-beam
C to C: 144mm
Big end diameter: 50.6mm
Pin diameter: 23mm (tapered)
Quantity: 5 pcs., 10 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 700HP (5 cylinder)
Advertised RPM rating: 9000RPM
Audi TT RS, RS3 - 2.5 20V TFSI (DAZA, DNWA)


You might also like

VW/Audi TT RS 2.5 20V TFSI Supertech valve springs set SPRK-A2416-5
VW Rabitt / Audi TT RS 2.5 20V TFSI Supertech valve spring kit SPRK-A2416-5
Spring data:
Seat pressure - 73lbs @ 38.60mm (intake), 85lbs @ 37.20mm (exhaust)
Open (lift) pressure - 178lbs @ 10mm (intake), 109lbs @ 10mm (exhaust)
Max lift - 12.50mm (intake), 11.00mm (exhaust)
Spring coil bind - 24.90mm

Rate - 10.50lbs/mm
Spring outer diameter - 24.00mm
Spring inner diameter - 16.50mm

Set includes:
Single springs - 20 pcs. SPR-A2416-5
Titanium retainers - 20 pcs. RET-A2416-N2
€599.00
Audi TTRS 2.5 20V TFSI JE Pistons kit CR 9.5 82.50mm 337966

Product detailed specification

Bore size

82.50mm

Stroke

92.80mm

JE Pistons compression ratio (CR)

9.5:1

OEM compression ratio (CR)

10.0:1

Dome volume (CC)

-7.50cm3

Compression height (CH)

29.60mm

Pin diameter

22mm

Features

Accepts Turbo and Nitrous; FSR Series skirt

Fits for

Audi TTRS 2.5 20V TFSI

JE's patented Perfect Skirt coating makes piston slap, false knock, and cold-start wear a thing of the past.
For the first time ever, 2618-alloy pistons can be installed with piston-to-wall clearances near that of an OEM piston!
€1,099.00
Audi TTRS 2.5 20V TFSI valve spring and titanium retainer kit
Spring data:
Seat pressure - 70lbs @ 38.40mm (intake), 82lbs @ 37.00mm (exhaust)
Open (lift) pressure - 172lbs @ 10mm (intake), 180lbs @ 10mm (exhaust)
Max lift - 11.90mm (intake), 10.60mm (exhaust)
Spring coil bind - 24.90mm
Rate - 10.20lbs/mm
Spring outer diameter - 24.00mm
Spring inner diameter - 16.50mm

Set includes:
Single springs - 20 pcs.
Titanium retainers - 20 pcs.
€549.00
Audi TTRS, RS3 2.5 20V TFSI Ultra Series JE Pistons kit CR 9.5 83mm 367847

Product detailed specification

Bore size

83.00mm

Stroke

92.80mm

JE Pistons compression ratio (CR)

9.5:1

OEM compression ratio (CR)

10.0:1

Dome volume (CC)

-8.10cm3

Compression height (CH)

29.60mm

Pin diameter

22mm

Features

Accepts Turbo and Nitrous; Ultra series

Fits for

Audi TTRS, RS3 - 2.5 20V TFSI

€1,349.00
Audi TT RS 2.5 20V TFSI ARP cylinder head stud kit 204-DAZA
ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.
€347.00
Audi TT RS 2.5 20V TFSI DAZA Athena Cooper Ring cylinder head gasket...
Athena Racing 330 series Cooper Ring cylinder head gasket.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).
Part number 330117R
Gasket thickness: 1.40mm
Bore size: 83.50mm


Part number starting with 330

Athena advantages

Reinforced material

Asbestos free composite raw material OE approved

Stainless steel ring (AISI304)

Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required

Silicon beading

Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages

€299.00