Click here to open old website version
All categories
Parts by Car
Go
Parts by Car
Go

Cometic BMW M3 E46 3.2 S54B32 MLS cylinder head gasket 87.5x1.52mm C4505-060

Part number C4505-060
Cometic MLS cylinder head gasket .060" 87.5mm
BMW M3 E46 - 3.2 (S54B32)
€289.00
Availibilty:2 items
Information
COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

You might also like

BMW M3 E46 S54 Head studs
BMW M3 E46 3.2 S54B32 ARP cylinder head stud kit 201-4303
ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.
€357.00
BMW 3.2 S54B32 Athena Racing head gasket 87.50x1.2mm 330037R
BMW M3 E46 3.2 S54B32 Athena Cooper Ring cylinder head gasket 87.5x1.2mm 330037R
Athena Racing 330 series Cooper Ring cylinder head gasket.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).
Part number 330037R
Gasket thickness: 1.20mm
Bore size: 87.50mm



Part number starting with 330

Athena advantages

Reinforced material

Asbestos free composite raw material OE approved

Stainless steel ring (AISI304)

Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required

Silicon beading

Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages

  
€299.00
BMW M3 E46 3.2 S54B32 24V FCP racing valve spring set
Valve springs data
Installed seat pressure - 40kg (88lbs)

Load - 100kg@12mm (220lbs@12mm)
Max lift - up to 13mm,
Made from chrome-silicon steel SAE9254-V
24 pcs. valve double springs
Fits BMW M3 - 3.2 24V (S54B32)
With this set the risk of valve flutter and a possible engine failure is minimized.
Recommended for engines with series and racing camshafts and over 7500 RPM.

Can be used together with standard retainers and seats.
€399.00
BMW M3 E46 S54B32 Supertech high RPM valve and valve spring kit
This is a set of Supertech valve springs, titanium retainers, valves and lash caps for BMW S54B32 Engine. This kit will reliably allow your engine to rev up to 9000rpm and eliminates the risk of OEM valve shim failure, valve float, or coil bind.
Aftermarket valve springs are made out of superior metal alloy's and optimized spring rates to make sure your valve train can keep up with your cams at high RPM. Whether you are rebuilding your engine, or building an all out race engine, replacing your valve train with Supertech components will allow you to rev higher, and go more aggressive on your cams.
€2,299.00
Cometic BMW M3 E46 3.2 S54B32 MLS cylinder head gasket 87.5x1mm C4505-040
COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.
€249.00
Cometic BMW M3 E46 3.2 S54B32 MLS cylinder head gasket 87.5x2.34mm C4505-092
COMETIC MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.
€299.00