ENGINE BEARINGS | ||
CON ROD BEARING SET |
||
Part# | ||
6B8100H |
6B8100HX |
|
Sizes | STD, .025, .25 | STD |
Oil Clearance | Standard | + 0.001" Extra |
Half Type | Identical halves | |
Material |
Tri-metal Hardened steel backs |
|
Min Std Shaft Size |
2.0465in / 51.981mm |
|
Max Std Shaft Size |
2.0472in / 52mm |
|
Min Std Tunnel Size |
2.1663in / 55.024mm |
|
Max Std Tunnel Size |
2.167in / 55.042mm |
|
Max Wall at Crown |
0.0593in / 1.506mm |
0.0588in / 1.493mm |
Max Overall Length |
0.7598in / 19.3mm |
|
Notes | ||
Diagram |
|
Sizes | STD, .025, .25 |
Oil Clearance | Standard |
Half Type | Upper & Lower |
Material | Tri-Metal |
Min. Std Shaft Size | 2.4403in / 61.984mm |
Max. Std Shaft Size | 2.441in / 62.001mm |
Min. Std Tunnel Size | 2.5992in / 66.02mm |
Max. Std Tunnel Size | 2.5998in / 66.035mm |
Max Wall at Crown | 0.0789in / 2.004mm |
Max Overall Length | 0.7874in / 20mm (8103H/HX) 0.9055in / 23mm (8104H/HX) |
Weight | 0.44 |
Notes | 0 |
Part number 2T8103-STD
ACL thrust washers kit
Toyota 2.5 3.0 - (1JZGE, 1JZGTE, 2JZGE, 2JZGTE)
Component | M7084/1UPR / M7084/1LPR |
Min Crankshaft Diameter | 2.440 inch / 61.98mm |
Max Crankshaft Diameter | 2.441inch / 62.00mm |
Min Housing Diameter | 2.599 inch / 66.02 mm |
Max Housing Diameter | 2.600 inch / 66.04 mm |
Bearing Length | 0.787 inch / 19.99 mm |
Max Wall Thickness | 0.000 inch / 0.00 mm |
Component | M7084/2UPR / M7084/2LPR |
Min Crankshaft Diameter | 2.440 inch / 61.98mm |
Max Crankshaft Diameter | 2.441inch / 62.00mm |
Min Housing Diameter | 2.599 inch / 66.02 mm |
Max Housing Diameter | 2.600 inch / 66.04 mm |
Bearing Length | 0.906 inch / 23.01 mm |
Max Wall Thickness | 0.000 inch / 0.00 mm |
|
|||||||
Quantity | 6 | ||||||
Crankshaft | 51.999 / 51.981 | ||||||
Housing | 55.024 / 55.042 | ||||||
Max Wall | 1.506 | ||||||
Max Length | 19.200 |
|
|||||||
Quantity | 6 | ||||||
Crankshaft | 51.999 / 51.981 | ||||||
Housing | 55.024 / 55.042 | ||||||
Max Wall | 1.506 | ||||||
Max Length | 19.200 |
Product detailed specification |
|
Model number |
TIVN-1016 |
Head diameter |
34.50mm |
Stem diameter |
5.98mm |
Length |
98.55mm |
Material |
Black nitrided stainless steel |
Fits for |
Toyota Supra - 3.0 (2JZGE, 2JZGTE) |
Product detailed specification |
|
Model number |
TEVN-1016 |
Head diameter |
30.00mm |
Stem diameter |
5.97mm |
Length |
99.10mm |
Material |
Black nitrided |
Fits for |
Toyota Supra - 3.0 (2JZGE, 2JZGTE) |
Product detailed specification |
|
Model number |
TEVI-1016 |
Head diameter |
30.00mm |
Stem diameter |
5.97mm |
Length |
99.10mm |
Material |
Inconel |
Fits for |
Toyota Supra - 3.0 (2JZGE, 2JZGTE) |
Part number starting with 338 |
|
Athena advantages |
|
Optimized radius embossing shape |
The round shape of the embossing increases sealing on cylinder bore, oil and cooling water passages and improves spring back strength |
Advanced stopper technology |
State of the technology enhances sealing pressure around the cylinder. Highest sealing properties in high power engines |
Coating technology |
Designed & engineered by Athena the special coating applied on steel surfaces, improves temperature resistance & reliability of the head gasket |
|
|||||||
Quantity | 6 | ||||||
Crankshaft | 51.999 / 51.981 | ||||||
Housing | 55.024 / 55.042 | ||||||
Max Wall | 1.506 | ||||||
Max Length | 19.200 |
Component | M7084/1UPR / M7084/1LPR |
Min Crankshaft Diameter | 2.440 inch / 61.98mm |
Max Crankshaft Diameter | 2.441inch / 62.00mm |
Min Housing Diameter | 2.599 inch / 66.02 mm |
Max Housing Diameter | 2.600 inch / 66.04 mm |
Bearing Length | 0.787 inch / 19.99 mm |
Max Wall Thickness | 0.000 inch / 0.00 mm |
Component | M7084/2UPR / M7084/2LPR |
Min Crankshaft Diameter | 2.440 inch / 61.98mm |
Max Crankshaft Diameter | 2.441inch / 62.00mm |
Min Housing Diameter | 2.599 inch / 66.02 mm |
Max Housing Diameter | 2.600 inch / 66.04 mm |
Bearing Length | 0.906 inch / 23.01 mm |
Max Wall Thickness | 0.000 inch / 0.00 mm |
Product detailed specification |
|
Model number |
TIVN-1014 |
Head diameter |
33.50mm |
Stem diameter |
5.98mm |
Length |
98.55mm |
Material |
Black nitrided stainless steel |
Fits for |
Toyota Supra - 3.0 (2JZGE, 2JZGTE) |
Product detailed specification |
|
Model number |
TEVI-1014 |
Head diameter |
29.00mm |
Stem diameter |
5.97mm |
Length |
99.10mm |
Material |
Inconel |
Fits for |
Toyota Supra - 3.0 (2JZGE, 2JZGTE) |
Part number starting with 330 |
|
Athena advantages |
|
Reinforced material |
Asbestos free composite raw material OE approved |
Stainless steel ring (AISI304) |
Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required |
Silicon beading |
Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages |
Product detailed specification |
|
Bore size |
86.50mm |
Stroke |
86.00mm |
JE Pistons compression ratio (CR) |
8.5:1 |
OEM compression ratio (CR) |
8.5:1 |
Dome volume (CC) |
-16.40cm3 |
Compression height (CH) |
34.00mm |
Pin diameter |
22mm |
Features |
Accepts Turbo and Nitrous; FSR skirt |
Fits for |
Toyota Supra - 3.0 (2JZGTE) |
Product detailed specification |
|
Bore size |
86.50mm |
Stroke |
94.00mm |
JE Pistons compression ratio (CR) |
9.5:1 |
OEM compression ratio (CR) |
8.5:1 |
Dome volume (CC) |
-14.00cm3 |
Compression height (CH) |
30.00mm |
Pin diameter |
22mm |
Features |
Accepts Turbo and Nitrous; asymmetrical FSR serie; Tuff coated piston skirt |
Fits for |
Toyota Supra - 3.0 Stroker (2JZGTE) |
Product detailed specification |
|
Bore size |
87.00mm |
Stroke |
86.00mm |
JE Pistons compression ratio (CR) |
8.5:1 |
OEM compression ratio (CR) |
8.5:1 |
Dome volume (CC) |
-17.10cm3 |
Compression height (CH) |
34.00mm |
Pin diameter |
22mm |
Features |
Accepts Turbo and Nitrous; asymmetrical FSR series; skirt coated |
Fits for |
Toyota Supra - 3.0 (2JZGTE) |
Product detailed specification |
|
Bore size |
86.50mm |
Stroke |
86.00mm |
JE Pistons compression ratio (CR) |
9.5:1 |
OEM compression ratio (CR) |
8.5:1 |
Dome volume (CC) |
-8.30cm3 |
Compression height (CH) |
34.00mm |
Pin diameter |
22mm |
Features |
Accepts Turbo and Nitrous; asymmetrical FSR series pistons skirt |
Fits for |
Toyota Supra - 3.0 (2JZGTE) |
Length: 1144mm
Width: 25mm
Number of tooth: 143
Gates' timing belts offer a precision fit with easy installation and no interference engine damage - exactly what you've come to expect from the worldwide leader in timing belts.
- Tensile cord reinforced with premium, high-strength glass cords.
- Gripping teeth with aramid fiber technology and high saturation HNBR elastomeric composites for exceptional durability and heat resistance.
- Wear-resistant tooth jacket supported by reinforced nylon fabric and double-tooth stability.
The superior construction of Gates timing belts makes them 300 percent stronger than the standard aftermarket belt while providing up to three times the heat resistance.
Spring data:
Outer spring outer diameter: 27.50mm
Outer spring inner diameter: 20.00mm
Inner spring outer diameter: 20.00mm
Inner spring inner diameter: 15.20mm
Seat pressure: 80Lbs@33.60mm (seat), 185Lbs@11mm (open/lift)
Spring coil bind: 20.00mm
Max lift: 13.60mm
Rate: 9.60Lbs/mm
Set includes: