Home

Audi / VW 1.8T 20V JE Pistons kit CR 9.25 81.50mm 242881

Product detailed specification
Bore size	81.50mm
Stroke	86.40mm
JE Pistons compression ratio (CR)	9.25:1
OEM compression ratio (CR)	9.5:1
Dome volume (CC)	-3.10cm³
Compression height (CH)	32.66mm
Pin diameter	20mm
Features	Accepts Turbo and Nitrous; Round piston skirt
Fits for	VAG - 1.8T 20V

€899.00

Peugeot 2.0 8V 16V ACL Race Series connecting rod bearings 4B7700H-STD

ENGINE BEARINGS
	CON ROD BEARING SET
	Part#
	4B7700H
Sizes	STD, .25
Oil Clearance	Standard
Half Type	Identical Halves
Material	Tri-metal Hardened steel backs
Min Std Shaft Size	1.9679 in / 49.984 mm
Max Std Shaft Size	1.9685 in / 50.000 mm
Min Std Tunnel Size	2.1140 in / 53.695 mm
Max Std Tunnel Size	2.1145 in / 53.708 mm
Max Wall at Crown	0.0722 in / 1.834 mm
Max Overall Length	0.797 in / 20.25 mm
Diagram (Top View)

Engines: Peugeot 4 cylinder 1.9 Liter XU92C, XU9S (SOHC 8 valves) 2.0 Liter XU102C, XU10J2, XU10J2TE, XU10M (SOHC 8 valves) 2.0 Liter XU10J4, XU10J4RS, XU10J4TE (DOHC 16 valves)

€89.00

Audi S2, RS2, S4 SACHS Performance organic clutch disc 240mm 881861999802

Clutch disc, torsion damped, with special organic clutch friction material.
Diameter: 240mm
Number of teeth: 23
Hub profile: 21.9x24.3-23N
Transmittable torque: 520Nm
Manufacturer compare numbers:

Audi

034 141 032 M
046 141 031 K
046 141 031 L
077 141 031 A
077 141 031 B
078 141 031 A

VW

034 141 032 M
046 141 031 K
046 141 031 L
077 141 031 A
077 141 031 B

These high performance clutch plates from Sachs are a direct replacement for an OEM clutch plate and have a much more aggressive friction surface which allows them to handle up to 40% more torque. This makes them ideal for competition cars where a more aggressive clutch actuation is acceptable. For these clutch plates to operate at their maximum torque capacity they should be used with a Sachs high performance clutch cover.

€329.00

Depo Racing digital+analog fuel pressure gauge 6bar 52mm SLD5267B

Sensor and waterproof connector included

€89.00

BMW M3 S14 Supertech valve spring set SPRK-H1005D-S14

Spring data:
Seat pressure - 90lbs @ 35.5mm
Open (lift) pressure - 230lbs @ 13.0mm
Spring coil bind - 21.50mm
Max lift - 14.80mm
Rate - 11.50mm
Outer spring outer diameter - 29.65mm
Outer spring inner diameter - 21.85mm
Inner spring outer diameter - 20.50mm
Inner spring inner diameter - 15.50mm

Set includes:
Double springs - 16 pcs. SPR-H1005D-S14
Titanium retainers - 16 pcs. RET-BMS14-T1
Seats - 16 pcs. SEAT-H1002-S14

€735.00

Turbosmart Gen-V WG50 Pro-Gate50 wastegate 14psi Blue TS-0554-1011

The Gen-V WG50 Pro-Gate50 external wastegate is a cost effective, high performing 50mm external wastegate.

The Gen-V provides extensive user configurability, world leading extended thermal performance, fatigue resistance and best in class flow performance for optimum control and longevity.

A direct fit upgrade to all 4th-generation Turbosmart wastegates and feature our unique collar-locking system, variable actuator cap and base, strap-type V-band clamps, liquid-cooling, 1/8″ NPT ports, and are provided with a range of springs.

Available in Compressed Gas configuration.

Product features summary:
• Liquid cooling provision
• Strap type V-band clamps
• User adjustable actuator position
• Modular actuator design
• Compressed Gas configurations available.

€629.00

Audi S2 / RS2 6kg steel flywheel for 6-speed / 5-speed gearboxes

Direct replacement Single-mass flywheel made from Alloy steel (16MnCr5) with OEM trigger
Used with 5 / 6 gang gearboxes and original or aftermarket clutch kit.
Weight - 6kg (lighter version)

Can be used with Sachs Performance clutch cover 883082999707

Clutch disc options:
Organic Sachs Performance (500+ Nm) - 881861999802
4pad ceramic Sachs Performance (up to 700 Nm) - 881861999809
6pad ceramic Sachs Performance (750+ Nm) - 881861000027

€429.00

Opel / Vauxhall 2.0 C20XE Wiseco pistons CR 13.5 87mm KE263M87

Product detailed specification
Bore size	87.00mm
Stroke	86.00mm
Wiseco compression ratio (CR)	13.5:1
OEM compression ratio (CR)	10.5:1
Dome volume (CC)	12cm³
Compression height (CH)	30.49mm
Pin diameter	21mm
Features	Accepts Turbo and Nitrous; asymmetrical FSR series
Fits for	Opel - 2.0 16V (C20XE)

Armor Plated wiseco pistons have almost a bronze colored tint to the top of the piston and the wrist pin bore. Wiseco's Armor Plating is an abrasion resistant plating that raises the hardness of the aluminum, increases the durability of the ring grooves, prevents micro-welding of the piston rings, reduces carbon buildup and combats corrosion caused by detonation. Wiseco's most popular pistons now include Armor Plating.

€829.00

Nissan Skyline 2.6 RB26DETT Wiseco Pistons CR 8.25 87.50mm K591M875AP

Product detailed specification
Bore size	87.50mm
Stroke	73.70mm
Wiseco compression ratio (CR)	8.25:1
OEM compression ratio (CR)	8.5:1
Dome volume (CC)	14cm³
Compression height (CH)	30.00mm
Pin diameter	21mm
Features	Accepts Turbo and Nitrous
Fits for	Nissan Skyline R32-R34 2.6 24V (RB26DETT)

Armor Plated wiseco pistons have almost a bronze colored tint to the top of the piston and the wrist pin bore. Wiseco's Armor Plating is an abrasion resistant plating that raises the hardness of the aluminum, increases the durability of the ring grooves, prevents micro-welding of the piston rings, reduces carbon buildup and combats corrosion caused by detonation. Wiseco's most popular pistons now include Armor Plating.

€1,199.00

Nissan 200SX 2.0 SR20DET ARP cylinder head stud kit 102-4701

ARP is a manufacturer of fasteners/bolts found in engines and drivelines, ranging from OEM replacement parts to specialty hardware for racing applications. ARP is the world leader in fastener technology.

€301.00

Audi / VW 2.8 2.9 3.2 3.6 VR6 R32 R36 ACL Race main bearings 7M5532HX-STD

Part number 7M5532HX-STD (+0.001" extra clearance)
ACL Race Series main bearings
Audi / VW - 2.8 2.9 3.2 3.6 VR6 R32 R36 (BUB, BHK, AES, AUE, ABV, AAA, AMY)

€199.00

Toyota Supra 3.0 2JZGTE Wiseco Pistons kit CR 9.6 86.5mm K677M865AP

Product detailed specification
Bore size	86.50mm
Stroke	86.00mm
Wiseco compression ratio (CR)	9.5:1
OEM compression ratio (CR)	8.5:1
Dome volume (CC)	-5.3cm³
Compression height (CH)	34.00mm
Pin diameter	5,72mm wall tool steel pins, 22mm
Features	HD2 Forging; FSR series piston skirt Pistons are with 1mm deeper valve pockets
Fits for	Toyota Supra - 3.0 (2JZGTE)

Wiseco HD2 pistons are specially designed for high-horsepower builds. Wiseco found the parts of pistons that fail when over-powered and beefed them up in those areas like the pin bore, ring lands, crown, etc. They also included a thicker wall pin that will stand up to more abuse than a standard pin. These pistons also come with Asymmetric Skirt AND is Gas Ported! This is definitely the piston to use if you are going to be pushing for big power.

Armor Plated wiseco pistons have almost a bronze colored tint to the top of the piston and the wrist pin bore. Wiseco's Armor Plating is an abrasion resistant plating that raises the hardness of the aluminum, increases the durability of the ring grooves, prevents micro-welding of the piston rings, reduces carbon buildup and combats corrosion caused by detonation. Wiseco's most popular pistons now include Armor Plating.

€1,199.00