Home

Ecumaster EMU Pro 16 stand alone computer EN version

ECUMASTER EMU Pro16 Specifications

€2,149.00

Opel / Vauxhall 2.0 Z20LET Wiseco pistons CR 8.8 86.5mm KE367M865

Product detailed specification
Bore size	86.50mm
Stroke	86.00mm
Wiseco compression ratio (CR)	8.8:1
OEM compression ratio (CR)	9.0:1
Dome volume (CC)	-18cm³
Compression height (CH)	30.43mm
Pin diameter	21mm
Features	Round piston skirt
Fits for	Opel - 2.0 16V (C20LET)

€829.00

BMW M50 / M52 / M54 / S52 - super damper installation kit with ATI DAMPER

CrMo tool steel crankshaft hub to be used with ATI super damper
Lightweight 60-2 trigger wheel made of high tensile Domex steel
ATI super damper shown in the pictures is included
A/C pulley not compatible with the kit
Check/adjust the ignition timing after installing
Comes with mounting hardware

€899.00

Audi / VW 1.8 2.0 KR PL, 16V 1.8T 20V FCP H-beam steel connecting rods...

Product detailed specification

Manufacturer: FCP Engineering
Model: FCPRHA14450620-4
Profile: H-beam
C to C: 144mm
Big end diameter: 50.6mm
Pin diameter: 20mm
Quantity: 4 pcs., 8 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 600HP (4 cylinder)
Advertised RPM rating: 9000RPM
Audi / VW / Seat / Skoda:
1.8T 20V (AEB, BAM, AWB and others)
1.8 2.0 16V (KR, PL, 9A)

€439.00

Audi 200 S2 RS2 S4 S6 2.5 2.6 20V stroker FCP H-beam con rods 155mm

Audi 200 S2 RS2 S4 S6 2.5 2.6 20V Stroker FCP H-beam steel connecting rods 155mm

Product detailed specification

Manufacturer: FCP Engineering
Model: FCPRHA15550620-5
Profile: H-beam
C to C: 155mm
Big end diameter: 50.6mm
Pin diameter: 20mm
Quantity: 5 pcs., 10 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 800HP (5 cylinder)
Advertised RPM rating: 9000RPM
Audi Quattro, 200, S2, RS2, S4, S6 - 2.5 2.6 20V Stroker

Engine setup: 2.5tdi 236mm block with 95.5 crankshaft and standard 2.2 20V Pistons

€539.00

Audi / VW 2.0 8V, 2.0 16V ABF, ABA, AAD, 2E FCP steel con rods 159mm

Audi / VW 2.0 8V-16V AAD ABF 2E FCP H-beam steel connecting rods 159mm

Product detailed specification

Manufacturer: FCP Engineering
Model: FCPRHVW15950621-4
Profile: H-beam
C to C: 159mm
Big end diameter: 50.6mm
Pin diameter: 21mm
Quantity: 4 pcs., 8 pcs. ARP2000 3/8" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 600HP (4 cylinder)
Advertised RPM rating: 9000RPM
Audi / VW 2.0 8V, 2.0 16V engines with 236mm block (ABF, ABA, AAD, 2E)

€439.00

Audi S6 S4 RS4 2.7T 2.8 3.0 30V racing valve spring kit

Audi S6 S4 RS4 2.7T 2.8 3.0 30V FCP valve spring kit

Valve springs data
Installed seat pressure:
Intake valve spring - 25kg, exhaust double valve spring - 36kg
Load:
Intake - 56kg@10.5mm, exhaust - 84kg@10.5mm
Max lift:
intake - up to 11mm, exhaust - up to 12.7mm
Made from chrome-silicon steel SAE9254-V
18 pcs. intake valve single springs
12 pcs. exhaust valve double springs
Fits all V6 2.7 2.8 3.0 30V Turbo/NA Audi / VW engines.
With this set the risk of valve flutter and a possible engine failure is minimized.
Recommended for engines with series and racing camshafts and over 7600 RPM.
Can be used together with standard or with FCP titanium retainers.

€450.00

BMW 2.8 M50B28 M52B28 TURBO FCP forged pistons 84.50mm CR 9.0

Part number: FCPPB845090M50
Manufacturer: FCP Engineering
Forged high performance pistons for various applications in nearly all engine types for racing and street use.
Made of 4032-T6, piston skirt is molibden coated.
Each set of pistons also includes rings and HD series pins.
Bore: 84.50mm
Compression ratio (CR): 9.0:1
Compression height: 32.50 mm
Pin diameter: 22mm
Stroke: 84.00mm
BMW 328 528 Turbo (M50B28, M52B28)
Connecting rod length must be 135mm
These pistons are for stroked BMW 2.8 engine M50B25 with M52B28 crank!

€1,169.00

Audi / VW 1.6 1.8 2.0 ACL Race connecting rod bearings 4B1606HX-STD

ENGINE BEARINGS
	CON ROD BEARING SET
	Part#
	4B1606H	4B1606HX
Sizes	STD, .025, .25, .50	STD
Oil Clearance	Standard	+ 0.001" Extra
Half Type	Identical Halves
Material	Tri-metal Hardened steel backs
Min Std Shaft Size	1.8802" /47.758mm
Max Std Shaft Size	1.8810" /47.778mm
Min Std Tunnel Size	1.9921" /50.600mm
Max Std Tunnel Size	1.9929" /50.619mm
Max Wall at Crown	0.0553" / 1.405mm	0.0548" /1.392mm
Max Overall Length	0.748" / 19.00mm
Notes	Bearing has 1.65mm oil hole at crown
Diagram (Top View)

Engines Audi / VW - 1.6 1.8 2.0 (2V, 4V, 5V, Turbo applicatons, 1983-2003)

€72.00

Opel 1.8 2.0 2.2 2.4 ACL Race connecting rod bearings 4B2322HX-STD

NGINE BEARINGS
	CON ROD BEARING SET
	Part#
	4B2322H	4B2322HX
Sizes	STD, .025, .25, .50	STD
Oil Clearance	Standard	+ 0.001" Extra
Half Type	Upper & Lower
Material	Tri-metal Hardened steel backs
Min Std Shaft Size	1.9280in / 48.971mm
Max Std Shaft Size	1.9286 in / 48.987mm
Min Std Tunnel Size	2.0472in / 52.000mm
Max Std Tunnel Size	2.0477in / 52.012mm
Max Wall at Crown	0.0591in / 1.500mm	0.0596in / 1.513mm
Max Overall Length	0.760in / 19.30mm
Notes	Upper rod bearing has two oil holes to cover early and late engines.
Diagram (Top View)

Engines Opel 4 cylinder 1.8 2.0 2.2 2.4

€75.00

BMW 2.0 2.3 2.7 M20 FCP H-beam steel connecting rods 130mm

Product detailed specification

Manufacturer: FCP Engineering
Model: FCPRHB1304822
Profile: H-beam
C to C: 130mm
Big end diameter: 48mm
Pin diameter: 22mm
Quantity: 6 pcs., 12 pcs. ARP2000 bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 1000HP (6 cylinder)
Advertised RPM rating: 9000RPM
BMW E21, E28, E30, E34 - 2.0 2.3 2.7 (M20B20, M20B23, M20B27)

€639.00

Audi / VW 1.9 TDi FCP H-beam steel connecting rods 144mm

Product detailed specification

Manufacturer: FCP Engineering
Model: FCPRHVW14450626
Profile: H-beam
C to C: 144mm
Big end diameter: 50.6mm
Pin diameter: 26mm
Quantity: 4 pcs., 8 pcs. ARP2000 5/16" bolts
Made of: forged steel 4340 EN24er
Advertised horsepower rating: 600HP (4 cylinder)
Advertised RPM rating: 9000RPM
AUDI / VW 1.9TDi 66-81kW and PD 74-85kW

€439.00