There are no items in cart
|
Product detailed specification |
|
|
Bore size |
83.00mm |
|
Stroke |
92.80mm |
|
JE Pistons compression ratio (CR) |
9.5:1 |
|
OEM compression ratio (CR) |
10.0:1 |
|
Dome volume (CC) |
-8.10cm3 |
|
Compression height (CH) |
29.60mm |
|
Pin diameter |
22mm |
|
Features |
Accepts Turbo and Nitrous; Ultra series |
|
Fits for |
Audi TTRS, RS3 - 2.5 20V TFSI |
| Sizes | STD, .025, .25 |
| Oil Clearance | Standard |
| Half Type | Identical Halves |
| Material | Tri-metal Hardened steel backs |
| Min. Std Shaft Size | 1.889in / 47.98mm |
| Max. Std Shaft Size | 1.8898in / 48mm |
| Min. Std Tunnel Size | 2.008in / 51.004mm |
| Max. Std Tunnel Size | 2.0088in / 51.024mm |
| Max Wall at Crown | 0.0591in / 1.5mm |
| Max Overall Length | 0.6063in / 15.40mm |
| Weight | 0.12 |
| Notes | 0 |
| Sizes | STD, .025, .25 |
| Oil Clearance | Standard |
| Half Type | Identical halves |
| Material | Tri-metal Hardened steel backs |
| Min. Std Shaft Size | 2.0465in / 51.981mm |
| Max. Std Shaft Size | 2.0472in / 52mm |
| Min. Std Tunnel Size | 2.1663in / 55.024mm |
| Max. Std Tunnel Size | 2.167in / 55.042mm |
| Max Wall at Crown | 0.0593in / 1.506mm |
| Max Overall Length | 0.7598in / 19.3mm |
| Weight | 0.253 |
| Notes | 0 |
| Sizes | STD, .025, .25, .50 |
| Oil Clearance | Standard |
| Half Type | Identical Halves |
| Material | Tri-Metal |
| Min. Std Shaft Size | 2.3616in / 59.984mm |
| Max. Std Shaft Size | 2.3622in / 60.000mm |
| Min. Std Tunnel Size | 2.5197in / 64.000mm |
| Max. Std Tunnel Size | 2.5205in / 64.020mm |
| Max Wall at Crown | 0.0789in / 2.005mm |
| Max Overall Length | 0.7480in / 19.00mm (8297H/HX) 0.5953in / 15.12mm (8298H/HX) 0.8642in / 21.95mm (8299H/HX - Flange) |
| Weight | 0.31 |
| Notes | Thrust in #3 pos. |
|
Part number starting with 330 |
|
|
Athena advantages |
|
|
Reinforced material |
Asbestos free composite raw material OE approved |
|
Stainless steel ring (AISI304) |
Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required |
|
Silicon beading |
Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages |
| Position |
3 | 1,2,4,5 | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Pairs & PN |
|
|
||||||||||||
| Quantity |
1 | 4 | ||||||||||||
| Crankshaft |
57.983 / 57.996 | 57.983 / 57.996 | ||||||||||||
| Housing |
62.001 / 62.014 | 62.001 / 62.014 | ||||||||||||
| Max Wall |
1.991 | 1.991 | ||||||||||||
| Max Length |
See FL O/S Table | 19.500 | ||||||||||||
| FL O/S |
|
| ENGINE BEARINGS | ||
 |
CON ROD BEARING SET |
|
| Part# | ||
| 4B1606H |
4B1606HX |
|
| Sizes | STD, .025, .25, .50 | STD |
| Oil Clearance | Standard | + 0.001" Extra |
| Half Type | Identical Halves | |
| Material |
Tri-metal Hardened steel backs |
|
| Min Std Shaft Size |
1.8802" /47.758mm |
|
| Max Std Shaft Size |
1.8810" /47.778mm |
|
| Min Std Tunnel Size |
1.9921" /50.600mm |
|
| Max Std Tunnel Size |
1.9929" /50.619mm |
|
| Max Wall at Crown |
0.0553" / 1.405mm |
0.0548" /1.392mm |
| Max Overall Length |
0.748" / 19.00mm |
|
| Notes | Bearing has 1.65mm oil hole at crown | |
|
Diagram |
 |
|
CT-1 is a Dry Film Lubricant coating that helps reduce friction and abrasive wear. It provides intermittent dry lubrication and is not affected by dust or dirt. CT-1 is specifically engineered to withstand the extreme conditions of today's high performance engines. Professional engine builders enjoy a higher level of confidence with increased embedability, strength and durability.
|
Bore size |
83.00mm |
|
Stroke |
92.80mm |
|
Mahle compression ratio (CR) |
9.6:1 |
|
OEM compression ratio (CR) |
9.6:1 |
|
Dome volume (CC) |
-7.00cm3 |
|
Compression height (CH) |
29.60mm |
|
Pin diameter |
21mm |
|
Features |
PowerPak Plus M142 Alloy |
|
Fits for |
VW / Audi - 2.0 TSI EA888 (CAWA, VAWB, CCTA, CCZB, CAEA) |
|
Product detailed specification |
|
|
Bore size |
82.50mm |
|
Stroke |
86.40mm |
|
JE Pistons compression ratio (CR) |
9.0:1 |
|
OEM compression ratio (CR) |
9.3:1 |
|
Dome volume (CC) |
-5.70cm3 |
|
Compression height (CH) |
30.70mm |
|
Pin diameter |
21mm |
|
Features |
Accepts Turbo and Nitrous; Round skirt |
|
Fits for |
Audi S4, RS4, A6 - 2.7 30V |
| Oil Clearance | Standard |
| Half Type | Identical Halves |
| Material | Tri-metal Hardened steel backs |
| Min. Std Shaft Size | 2.0465in / 51.981mm |
| Max. Std Shaft Size | 2.0472in / 51.999mm |
| Min. Std Tunnel Size | 2.1654in / 55.001mm |
| Max. Std Tunnel Size | 2.1663in / 55.024mm |
| Max Wall at Crown | 0.0589in / 1.496mm |
| Max Overall Length | 0.7677in / 19.5mm |
| Weight | 0.33 |
The GenV HyperGate45 HP external wastegate is a Motorsport proven, cost effective external wastegate with base spring pressure options of up to 50psi! Add to that some reference signal manipulation and you have some serious boost! The GenV provides extensive user configurability, world leading extended thermal performance, fatigue resistance and best in class flow performance for optimum control and longevity.
The GenV External Wastegate from Turbosmart was a ground up rework of a classic and the only feature that rolled over from the Gen4 range was the mounting orientation. CFD optimized and validated in-house for maximum flow and thermal management, the GenV range has more features, options and performance than any other gate like it.
A direct fit upgrade to all Gen4 Turbosmart wastegates and feature our unique collar-locking system, variable actuator cap and base for easy, 360 degree optional routing of reference hoses, strap-type V-band clamps, optional liquid-cooling provision and 1/8″ NPT reference ports.
