Audi RS4 3.0 Stroker V6 Biturbo FCP H-beam steel connecting rods 150.8mm/22mm

Diameter: 240mm

Compared to volume production pressure plates, SACHS Performance pressure plates have a higher transmittable torque and are less sensitive to thrust loading. Depending on the requirements, they are used with different discs. Higher pedal forces might occur.

AUDI :
	A4 B5 (8D2)
	S4 quattro (195 kW ; 09/1997 - 09/2001)
	A4 B5 Avant (8D5)
	S4 quattro (195 kW ; 09/1997 - 09/2001)
	A6 C5 (4B2)
	S6 quattro (250 kW ; 09/1999 - 01/2005)
	A6 C5 Avant (4B5)
	S6 quattro (250 kW ; 09/1999 - 01/2005)
	A8 D2 (4D2, 4D8)
	S 8 quattro (265 kW ; 06/1999 - 09/2002)
VOLKSWAGEN :
	PASSAT B5.5 (3B3)
	4.0 W8 4motion (202 kW ; 09/2001 - 09/2004)
	PASSAT B5.5 Variant (3B6)
	4.0 W8 4motion (202 kW ; 09/20

Part number 61-31350-00
Victor Reinz MLS cylinder head gasket set
Audi A4, A6, S4, Allroad - 2.4 2.7T V6

Part number 61-33500-00
Victor Reinz MLS cylinder head gasket set
Audi RS4 - 2.7T V6

Direct replacement Single-mass flywheel made from Alloy steel (16MnCr5) with 60-2 counter.
Used with 01E gearbox and Sachs Performance clutch kit.
Weight - 8.4kg.

Can be used with Sachs Performance clutch cover 883082999707

Clutch disc options:
Organic Sachs Performance (500+ Nm) - 881861999802
4pad ceramic Sachs Performance (up to 700 Nm) - 881861999809
6pad ceramic Sachs Performance (750+ Nm) - 881861000027

Lifter data:
30 pcs. FCP Engineering mechanical racing solid lifters.
Forged steel, nitride hardened surface, HRC 50.
Installed tappet height to camshaft must be adjusted with lash caps (not included).
Lifter adjustment requires:
18pcs. 6mm lash caps
12pcs. 7mm lash caps

Intake lifter data (18 pcs.):
Outer diameter - 23.97mm
Inner diameter - 23.97mm
Outer height - 24.20mm
Stem length - 15.00mm
Stud diameter - 6.00mm
Weight - 26g

Exhaust lifter data (12 pcs.):
Outer diameter - 33.47mm
Inner diameter - 31.50mm
Outer height - 26.00mm
Stem length - 15.00mm
Stud diameter - 7.00mm
Weight - 43g

Valve springs data
Installed seat pressure:
Intake valve spring - 25kg, exhaust double valve spring - 36kg
Load:
Intake - [email protected], exhaust - [email protected]
Max lift:
intake - up to 11mm, exhaust - up to 12.7mm
Made from chrome-silicon steel SAE9254-V
18 pcs. intake valve single springs
12 pcs. exhaust valve double springs
18 pcs. intake titanium retainers
12 pcs. exhaust titanium retainers
Fits all V6 2.7 2.8 3.0 30V Turbo/NA Audi / VW engines.
With this set the risk of valve flutter and a possible engine failure is minimized.  
Recommended for engines with series and racing camshafts and over 7600 RPM. Titanium retainers are very strong and light, they help to eliminate valve float. Weight is only 9 and 4 g.

Spring data:
Seat pressure - 60lbs @ 36.60mm, exhaust - 80lbs @ 33.20mm
Spring coil bind: intake - 23.00mm, exhaust - 19.50mm
Max lift: intake - 13.60mm, exhaust - 13.70mm
Rate: intake - 6.70lbs/mm, exhaust - 10.00lbs/mm
Intake single spring:
Outer diameter - 20.60mm
Inner diameter - 14.40mm
Exhaust double spring:
Outer spring outer diameter - 29.10mm
Outer spring inner diameter - 21.90mm
Inner spring outer diameter - 20.50mm
Inner spring inner diameter - 15.50mm

Set includes:
Intake springs - 18 pcs. SPR-A2095
Exhaust springs - 12 pcs. SPR-H1002D-AU
Titanium retainers: 18 pcs. intake RET-AU5VI-T2, 12pcs. exhaust RET-AU5VE-T1
Seats - 12 pcs. exhaust SEAT-H1000