Home

Enjoy the Walbro's new DCSS 39/50 in-tank fuel pump. Able to support an aggressive 700+ horsepower, with a super charger, this innovative dual pumping channel design delivers maximum pressure with superior fuel flow. Operating in both petrol and E85, this fuel pump comes with a check valve to avoid system leak-down and extended cranking at start-up. This superior design results in improved hot fuel flow, as well as minimal noise, increasing efficiency by 20% over conventional pumps, delivering unparalleled performance.

Specifications:

• Fittings In (mm): 11
• Fittings Out (mm): 9
• Pump: Ti Automotive (Walbro) F90000285
• Voltage DC: 12
• Pulse Width Modulation Compatible: Yes
• One way valve (NRV): Yes
• Flow Ltr/Hr (Max): 528
• Flow Ltr/Hr @ 3 Bar (44psi): 435
• Flow Ltr/Hr @ 5 Bar (73psi): 345
• Max Pressure (Bar): 8.3
• Length (mm): 130
• Diameter (mm): 50 / 39
• Weight (Kg): 0.430

Part number 8B1580H-0.25
ACL Race Series connecting rod bearings
BMW M3 E90 - 4.0 V8 (S65B40)

Cold side technical features:
Inducer: 42mm
Exducer: 56mm

Hot side technical features:
Inducer: 55mm
Exducer: 42mm

Kit includes turbocharger, gaskets, installation notice.

Athena Racing 330 series Cooper Ring cylinder head gasket set.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).
Part number: 330075R
Gasket thickness: 2.00mm
Bore size: 86.50mm

Modular 
The 5th series wastegate range has been designed for maximum user-adjustability, without compromising performance. We designed our new unit to allow actuators to be interchangeable across the range. So, if you need a large wastegate in a tight space you can run a smaller actuator on the larger body. Additionally, if you decide to upgrade your new wastegate to a Motorsport or compressed gas-only actuator you can with an upgrade kit.
Adjustability 
The unique variable adjustment design allows the wastegate actuator base to be oriented independently from the weld flanges. The cap is also completely independent and indexable in 12 different positions compared to the actuator base and body. This allows the wastegate to be fitted in confined positions without compromising packaging for fittings or aligning the cap. 
Upgrades and Servicing 
Due to the modular construction, the new range is also upgradeable and completely serviceable, as all components can be removed or upgraded. Components have been tested for over one million cycles so reliability will be rock-solid. 
Flow and Thermal Performance  
Our new range of wastegates out-flow all competitors thanks to our world-leading engineering and simulation abilities. Thermal performance has been improved drastically compared to our nearest rival, and all wastegates feature liquid cooling ports for further thermal performance if required 
Control 
For fine-tuning, boost performance, a selection of springs will be supplied with each wastegate. All wastegates feature 1/8″ NPT ports for maximum response and flow while maintaining a high level of compatibility for fittings.

Product features summary: 

• Modular interchangeable actuators 
• Independently orientated actuator base
• New strap type V band clamps 
• Increased thermal and flow performance, and; 
• A diaphragm design that offers linear travel; regardless of spring, pressure and valve positioning, while improving response. 
• Integrated water cooling ports (if required) 

Included in box: 

• Turbosmart Gen V Wastegate 
• Valve seat 
• Inlet V-band clamp 
• Inlet weld flange 
• Outlet V-band clamp 
• Outlet weld flange 
• Collar tool 
• Spring kit 
• Fitting kit