There are no items in cart
|
|||||||
| Quantity | 6 | ||||||
| Crankshaft | 51.976 / 51.956 | ||||||
| Housing | 55.001 / 55.014 | ||||||
| Max Wall | 1.501 | ||||||
| Max Length | 17.000 |
|
Product detailed specification |
|
|
Model number |
MEVI-1007 |
|
Head diameter |
30.50mm |
|
Stem diameter |
6.54mm |
|
Length |
109.60mm |
|
Material |
Inconel |
|
Fits for |
Mitsubishi 2.0 16V (4G63T) |
Athena Racing 338 series multilayer steel (MLS) cylinder head gasket.
Athena MLS gaskets are designed to suit the requirements of today’s competition engines offering enhanced sealing compared to the OEM product.
The gaskets are assembled from 2-5 layers of high quality stainless and spring steels.
Part number: 338321R
Gasket thickness: 1.65mm
Bore size: 83.00mm
|
Part number starting with 338 |
|
|
Athena advantages |
|
|
Optimized radius embossing shape |
The round shape of the embossing increases sealing on cylinder bore, oil and cooling water passages and improves spring back strength |
|
Advanced stopper technology |
State of the technology enhances sealing pressure around the cylinder. Highest sealing properties in high power engines |
|
Coating technology |
Designed & engineered by Athena the special coating applied on steel surfaces, improves temperature resistance & reliability of the head gasket |
|
Part number starting with 330 |
|
|
Athena advantages |
|
|
Reinforced material |
Asbestos free composite raw material OE approved |
|
Stainless steel ring (AISI304) |
Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required |
|
Silicon beading |
Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages |
Spring data:
Seat pressure - 94lbs @ 35.70mm
Open (lift) pressure - 209lbs @ 10mm
Spring coil bind - 20.70mm
Rate - 11.50lbs/mm
Max lift - 15.00mm
Outer spring outer diameter: 29.65mm
Outer spring inner diameter: 21.85mm
Inner spring outer diameter: 20.50mm
Inner spring inner diameter: 15.50mm
Set includes:
Dual springs: 24 pcs. SPR-H1005D-BM
Titanium retainers: 24 pcs. RET-AU5VE-T1
Seats: 24 pcs. SEAT-BM60
Direct replacement Single-mass flywheel made from Alloy steel (16MnCr5)
Used with aftermarket 228mm clutch kit.
Weight - 4.9kg.
Can be used with Sachs performance clutch cover - 883082999645
Clutch disc options:
Organic Sachs Performance (450+ Nm) - 881861999793
4pad ceramic Sachs Performance (520+ Nm) - 881861999750
| Sizes | STD, .025, .25, .50 |
| Oil Clearance | Standard |
| Half Type | Upper & Lower |
| Material | Tri-Metal |
| Min. Std Shaft Size | 2.1634in / 54.951mm |
| Max. Std Shaft Size | 2.1644in / 54.975mm |
| Min. Std Tunnel Size | 2.3089in / 58.645mm |
| Max. Std Tunnel Size | 2.3094in / 58.658mm |
| Max Wall at Crown | 0.0719in / 1.827mm |
| Max Overall Length | 0.7528in / 19.12mm (2394H/HX) 1.061in / 26.95mm (2395H/HX - Flange) |
| Weight | 0.41 |
| Notes | Flange in Position 4 |
Product detailed specification
Manufacturer: FCP Engineering
|
Product detailed specification |
|
|
Bore size |
82.50mm |
|
Stroke |
92.80mm |
|
JE Pistons compression ratio (CR) |
9.6:1 |
|
OEM compression ratio (CR) |
9.6:1 |
|
Dome volume (CC) |
-5.7cm3 |
|
Compression height (CH) |
29.30mm |
|
Pin diameter |
23mm |
|
Features |
Accepts Turbo and Nitrous; Ultra series |
|
Fits for |
Audi / VW 2.0 16V TSI chain driven engines EA888 (CAWA, CAWB, CCTA, CCZB, CAEA) |
Bore diameter - 82.50mm
Thickness - 1.22mm
Reinz part number - 61-31955-10
OE part numbers:
058 103 383 Q
058 103 383 M
06A 103 383 AK
058 103 383 K
058 103 383 H
|
Component |
1937 |
|
Halves |
Identical Halves |
|
Material code |
F780 |
|
Min Std Shaft Size |
1.9677 in / 49.98 mm |
|
Max Std Shaft Size |
1.9685 in / 50 mm |
|
Min Std Tunnel Size |
0.02 in / 0.54 mm |
|
Max Std Tunnel Size |
0.02 in / 0.54 mm |
|
Max Overall Length |
0.7874 in / 20 mm |
|
Max Wall At Crown |
0.0789 in / 2 mm |
