Cometic BMW 3.0 N55B30 (2010-17) MLX cylinder head gasket 85x1.1mm C15476-044

Part number C15476-044
Cometic MLX cylinder head gasket 85mm .044"
BMW 2, 3, 4, 5, 6, 7 Series (2010-17) - 3.0 (N55)

€249.00

Availibilty:1 items

Information

COMETIC MLX (Multi-Layer Stopper) gaskets utilize an integrated stopper layer for combustion chamber sealing and improved clamp load around the cylinder without increasing bore distortion. MLX technology can be found in some head gaskets and are made from the same materials as our MLS Head Gaskets. No sealants or re-torque required.

BMW 3.0 N54B30 / N55B30 / S55B30 Supertech conical spring kit SPRK-FE20N54-BE

Spring data:
Seat pressure - 75lbs @ 36.50mm
Open (lift) pressure - 155lbs @ 10.00mm
Spring coil bind - 23.20mm
Max lift - 12mm
Rate - 8 lbs./mm
Wide end spring outer diameter - 24.40mm
Wide end spring inner diameter - 17.60mm
Narrow end spring outer diameter - 21.00mm
Narrow end spring inner diameter - 14.30mm

Kit includes:
Single springs - 24 pcs. SPR-FE20N54-BE
Rretainers - 12 pcs. RET-BMN54-TI (5mm)
Retainers - 12 pcs. RET-BMN54-TE (6mm)

€1,149.00

BMW 3.0 N54B30 N55B30 S55B30 ACL Race connecting rod bearings 6B1584H-STD

€209.00

BMW 3.0 N54B30 N55B30 S55B30 ACL Race connecting rod bearings 6B1584H-0.25

€209.00

BMW 3.0 N54B30 N55B30 Athena Cooper Ring cylinder head gasket 86x1.5mm 330074R

Athena Racing 330 series Cooper Ring cylinder head gasket set.
For specific high horsepower applications, engine performance can be significantly improved by using Athena Cooper Ring gaskets, that are supplied with INOX steel ring. This technology outperforms conventional fire ring solutions.
Cooper Rings are oversize (also fits for oversize bores).
Part number: 330074R
Gasket thickness: 1.50mm
Bore size: 86.00mm

Part number starting with 330
Athena advantages
Reinforced material	Asbestos free composite raw material OE approved
Stainless steel ring (AISI304)	Separate stainless steel rings assure maximum sealing around cylinder bore also on NOS and/or turbo charged engine where boost is over 2 bars. No head and block machining required
Silicon beading	Silicon-based beading is applied on critical areas to improve sealing around all cooling water and oil passages

€299.00

BMW 6 cylinder 2.3 2.5 3.0 N52 N53 N54 N55 S55 Mahle main bearings

For bearing clearance from [mm]: 0,018
To bearing clearance [mm]: 0,068
For housing diameter from [mm]: 61,000
To housing diameter [mm]: 61,019
Width from [mm]: 23,86
Width to [mm]: 23,96
For wall thickness from [mm]: 2,500
To wall thickness [mm]: 2,506
For shaft diameter from [mm]: 55,951
To shaft diameter [mm]: 55,970

€99.00

BMW 3.0 N55B30 S55B30 Supertech black nitrided intake valve BMIVN-1055S STD

Product detailed specification
Model number	BMIVN-1055S
Head diameter	32.00mm
Stem diameter	4.97mm
Length	104.9mm
Material	Black nitrided stainless steel
Fits for	BMW E60, E90, E91, E92, E93, E82, E88, E89, X6, Z4, F01 - 3.0 (N55B30, S55B30)

€33.00

BMW 3.0 N55B30 S55B30 Supertech sodium filled exhaust valve BMEVI-1055S-HS STD

Product detailed specification
Model number	BMEVI-1055S-HS
Head diameter	28.00mm
Stem diameter	5.96mm
Length	112.9mm
Material	Sodium filled
Fits for	BMW E90, E91, E92, E93, E82, E88, E89, X6, Z4, F01 - 3.0 (N55B30, S55B30)

€63.00

BMW 3.0 N54B30 N55B30 S55B30 ACL Race Series main bearings 7M1397H-STD

€249.00

BMW 3.0 N54B30 N55B30 S55B30 ACL Race Series main bearings 7M1397H-0.25

€249.00

Cometic BMW 3.0 N55B30 (2010-17) MLX cylinder head gasket 85x1.1mm C15476-044

You might also like