There are no items in cart
Diameter: 240mm
Compared to volume production pressure plates, SACHS Performance pressure plates have a higher transmittable torque and are less sensitive to thrust loading. Depending on the requirements, they are used with different discs. Higher pedal forces might occur.
| AUDI : | ||
| A4 B5 (8D2) |  |
|
| S4 quattro (195 kW ; 09/1997 - 09/2001) | ||
| A4 B5 Avant (8D5) | |
|
| S4 quattro (195 kW ; 09/1997 - 09/2001) | ||
| A6 C5 (4B2) | |
|
| S6 quattro (250 kW ; 09/1999 - 01/2005) | ||
| A6 C5 Avant (4B5) | |
|
| S6 quattro (250 kW ; 09/1999 - 01/2005) | ||
| A8 D2 (4D2, 4D8) | |
|
| S 8 quattro (265 kW ; 06/1999 - 09/2002) | ||
| VOLKSWAGEN : | ||
| PASSAT B5.5 (3B3) | |
|
| 4.0 W8 4motion (202 kW ; 09/2001 - 09/2004) | ||
| PASSAT B5.5 Variant (3B6) | |
|
| 4.0 W8 4motion (202 kW ; 09/20 | ||
| ENGINE BEARINGS | ||
 |
CON ROD BEARING SET |
|
| Part# | ||
| 4B1606H |
4B1606HX |
|
| Sizes | STD, .025, .25, .50 | STD |
| Oil Clearance | Standard | + 0.001" Extra |
| Half Type | Identical Halves | |
| Material |
Tri-metal Hardened steel backs |
|
| Min Std Shaft Size |
1.8802" /47.758mm |
|
| Max Std Shaft Size |
1.8810" /47.778mm |
|
| Min Std Tunnel Size |
1.9921" /50.600mm |
|
| Max Std Tunnel Size |
1.9929" /50.619mm |
|
| Max Wall at Crown |
0.0553" / 1.405mm |
0.0548" /1.392mm |
| Max Overall Length |
0.748" / 19.00mm |
|
| Notes | Bearing has 1.65mm oil hole at crown | |
|
Diagram |
 |
|
CT-1 is a Dry Film Lubricant coating that helps reduce friction and abrasive wear. It provides intermittent dry lubrication and is not affected by dust or dirt. CT-1 is specifically engineered to withstand the extreme conditions of today's high performance engines. Professional engine builders enjoy a higher level of confidence with increased embedability, strength and durability.
Set includes:
1 crankcase gasket
1 crankshaft seal rear
1 crankshaft seal front
1 oil pump gasket
1 coolant pump gasket
etc.
|
Product detailed specification |
|
|
Bore size |
82.50mm |
|
Stroke |
86.40mm |
|
JE Pistons compression ratio (CR) |
8.5:1 |
|
OEM compression ratio (CR) |
9.5:1 |
|
Dome volume (CC) |
-12.20cm3 |
|
Compression height (CH) |
32.66mm |
|
Pin diameter |
20mm |
|
Features |
Accepts Turbo and Nitrous; Round piston skirt |
|
Fits for |
VAG - 1.8T 20V |
|
Product detailed specification |
|
|
Bore size |
83.00mm |
|
Stroke |
92.80mm |
|
JE Pistons compression ratio (CR) |
9.6:1 |
|
OEM compression ratio (CR) |
9.6:1 |
|
Dome volume (CC) |
-7.8cm3 |
|
Compression height (CH) |
29.60mm |
|
Pin diameter |
22mm |
|
Features |
Accepts Turbo and Nitrous; FSR coated piston skirt |
|
Fits for |
VW / Audi - 2.0 TSI chain driven engines EA888 (CAWA, VAWB, CCTA, CCZB, CAEA) |
|
Product detailed specification |
|
|
Bore size |
83.50mm |
|
Stroke |
92.80mm |
|
JE Pistons compression ratio (CR) |
12.8:1 |
|
OEM compression ratio (CR) |
10.5:1 |
|
Dome volume (CC) |
8.9cm3 |
|
Compression height (CH) |
29.59mm |
|
Pin diameter |
20mm |
|
Features |
Coated FSR series skirt |
|
Fits for |
VW - 2.0 16V 9A |
Set includes:
1 MLS cylinder head gasket (82mm x 1.65mm)
1 intake manifold gasket
1 exhaust manifold gasket
1 valve cover gasket
20 valve seals
and etc.
|
Product detailed specification |
|
|
Bore size |
81.50mm |
|
Stroke |
86.40mm |
|
JE Pistons compression ratio (CR) |
9.25:1 |
|
OEM compression ratio (CR) |
9.5:1 |
|
Dome volume (CC) |
-3.10cm3 |
|
Compression height (CH) |
32.66mm |
|
Pin diameter |
20mm |
|
Features |
Accepts Turbo and Nitrous; Round piston skirt |
|
Fits for |
VAG - 1.8T 20V |
Product detailed specification
Manufacturer: FCP Engineering
